Recently, nested and coprime arrays have attracted considerable interest due to their capability of providing increased array aperture, enhanced degrees of freedom (DOFs), and reduced mutual coupling effect compared to uniform linear arrays (ULAs). These features are critical to improving the performance of DOA estimation and adaptive beamforming. In this paper, a new sparse array configuration based on the maximum inter-element spacing constraint (MISC) is proposed. The MISC array configuration generally consists of three sparse ULAs plus two separate sensors that are appropriately placed. The MISC array configurations are designed based on the inter-element spacing set, which, for a given number of sensors, is uniquely determined by a closed-form expression. We also derive closed-form expressions for the number of uniform DOFs of the MISC arrays with any number of sensors. Compared with the existing sparse arrays, the MISC array enjoys two important advantages, namely, providing a higher number of DOFs and reducing the mutual coupling effects. Numerical simulations are conducted to verify the superiority of the MISC array over other sparse arrays.

We propose a high-resolution imaging radar system to enable high-fidelity four-dimensional (4D) sensing for autonomous driving, i.e., range, Doppler, azimuth, and elevation, through a joint sparsity design in frequency spectrum and array configurations. To accommodate a high number of automotive radars operating at the same frequency band while avoiding mutual interference, random sparse step-frequency waveform (RSSFW) is proposed to synthesize a large effective bandwidth to achieve high range resolution profiles. To mitigate high range sidelobes in RSSFW radars, optimal weights are designed to minimize the peak sidelobe level such that targets with relatively small radar cross section are detectable without introducing high probability of false alarm. We extend the RSSFW concept to multi-input multi-output (MIMO) radar by applying phase codes along slow time to synthesize a two-dimensional (2D) sparse array with hundreds of virtual array elements to enable high-resolution direction finding in both azimuth and elevation. The 2D sparse array acts as a sub-Nyquist sampler of the corresponding uniform rectangular array (URA) with half-wavelength interelement spacing, and the corresponding URA response is recovered by completing a low-rank block Hankel matrix. Consequently, the high sidelobes in the azimuth and elevation spectra are greatly suppressed so that weak targets can be reliably detected. The proposed imaging radar provides point clouds with a resolution comparable to LiDAR but with a much lower cost. Numerical simulations are conducted to demonstrate the performance of the proposed 4D imaging radar system with joint sparsity in frequency spectrum and antenna arrays.

In this letter, we propose a coprime array interpolation approach to provide an off-grid direction-of-arrival (DOA) estimation. Through array interpolation, a uniform linear array (ULA) with the same aperture is generated from the deterministic non-uniform coprime array. Taking the observed correlations calculated from the signals received at the coprime array, a gridless convex optimization problem is formulated to recover all the rows and columns of the unknown correlation matrix entries corresponding to the interpolated sensors. The optimized Hermitian positive semidefinite Toeplitz matrix functions as the covariance matrix of the interpolated ULA, which enables to resolve off-grid sources. Simulation results demonstrate that the proposed array interpolation-based DOA estimation algorithm achieves improved performance as compared to existing coarray-based DOA estimation algorithms in terms of the number of achievable degrees-of-freedom and estimation accuracy.

Electrical impedance tomography (EIT) is developed to investigate the internal conductivity changes of an object through a series of boundary electrodes, and has become increasingly attractive in a broad spectrum of applications. However, the design of optimal tomography image reconstruction algorithms has not achieved the adequate level of progress and matureness. In this paper, we propose an efficient and high-resolution EIT image reconstruction method in the framework of sparse Bayesian learning. Significant performance improvement is achieved by imposing structure-aware priors on the learning process to incorporate the prior knowledge that practical conductivity distribution maps exhibit clustered sparsity and intra-cluster continuity. The proposed method not only achieves high-resolution estimation and preserves the shape information even in low signal-to-noise ratio scenarios but also avoids the time-consuming parameter tuning process. The effectiveness of the proposed algorithm is validated through comparisons with state-of-the-art techniques using extensive numerical simulation and phantom experiment results.

This paper utilizes sparse array motion to increase the numbers of achievable both degrees of freedom (DOFs) and consecutive lags in direction-of-arrival (DOA) estimation problems. We use commonly employed environment-independent sparse array configurations. The design of these arrays is not dependent on the sources in the field of view, but rather aims at achieving desirable difference co-arrays. They include structured coprime and nested arrays, minimum redundancy array (MRA), minimum hole array (MHA), and sparse uniform linear array (SULA). Array motion can fill the holes in the spatial autocorrelation lags associated with a fixed platform and, therefore, increases the number of sources detectable by the same number of array sensors. Quasi-stationarity of the environment is assumed where the source locations and waveforms are considered invariant over array motion of half wavelength. Closed-form expressions of the number of DOFs and consecutive spatial correlation lags for coprime and nested arrays as well as SULA, due to array translation motion, are derived. The number of DOFs and consecutive lags for the specific cases of MRA an 5 avaluated. We show the respective DOA estimation performance based on sparse reconstruction techniques.