Yinlong Zhu

Dr. Yinlong Zhu

Nanjing Forestry University
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 January 2022 in Sensors
Verified
Journal Article
Open access
PDF file
YZYinlong Zhu
Yinlong Zhu
XCXin Chen
Xin Chen
KCKaimei Chu
Kaimei Chu
XWXu Wang
Xu Wang
ZHZhiqiang Hu
Zhiqiang Hu
Haijun SuHaijun Su
Haijun Su
Flexible sensing tends to be widely exploited in the process of human–computer interactions of intelligent robots for its contact compliance and environmental adaptability. A novel flexible capacitive tactile sensor was proposed for multi-directional force sensing, which is based on carbon black/polydimethylsiloxane (PDMS) composite dielectric layer and upper and lower electrodes of carbon nanotubes/polydimethylsiloxane (CNTs/PDMS) composite layer. By changing the ratio of carbon black, the resolution of carbon black/PDMS composite layer increases at 4 wt%, and then decreases, which was explained according to the percolation theory of the conductive particles in the polymer matrix. Mathematical model of force and capacitance variance was established, which can be used to predict the value of the applied force. Then, the prototype with carbon black/PDMS composite dielectric layer was fabricated and characterized. SEM observation was conducted and a ratio was introduced in the composites material design. It was concluded that the resolution of carbon sensor can reach 0.1 N within 50 N in normal direction and 0.2 N in 0–10 N in tangential direction with good stability. Finally, the multi-directional force results were obtained. Compared with the individual directional force results, the output capacitance value of multi-directional force was lower, which indicated the amplitude decrease in capacity change in the normal and tangential direction. This might be caused by the deformation distribution in the normal and tangential direction under multi-directional force.

21 August 2022 in Sensors
Verified
Journal Article
Open access
PDF file
YZYinlong Zhu
Yinlong Zhu
GWGong Weizhuang
Gong Weizhuang
KCKaimei Chu
Kaimei Chu
XWXu Wang
Xu Wang
ZHZhiqiang Hu
Zhiqiang Hu
Haijun SuHaijun Su
Haijun Su
In order to assist patients with finger rehabilitation training and grasping objects, we propose a new type of soft rehabilitation gloves (SRGs), which has both flexion/extension and abduction/adduction movement function for every finger. This paper describes the structure design of the bending actuator and rotating actuator, the fabrication process of the soft actuator, and the implementation of the soft wearable gloves based on a fabric glove. FEM simulation analysis and experiments were conducted to characterize the mechanical behavior and performance of the soft glove in terms of the angle output and force output upon pressurization. To operate this soft wearable glove, we designed the hardware system for SRGs with a flexible strain sensor and force sensor in the loop and introduced a force/position hybrid PID control algorithm to regulate the pressure inputted. Experiment evaluation focused on rehabilitation training gestures; motions and the precise grasping assistance function were executed. The rotating actuator between each finger can supply abduction/adduction motion manner for patients, which will improve rehabilitation effect. The experimental results demonstrated that the developed SRGs have the potential to improve hand movement freedom and the range of grasping successfully.

15 June 2022 in Sensors
Verified
Journal Article
Open access
PDF file
YZYinlong Zhu
Yinlong Zhu
KFKai Feng
Kai Feng
CHChao Hua
Chao Hua
XWXu Wang
Xu Wang
ZHZhiqiang Hu
Zhiqiang Hu
Haijun SuHaijun Su
Haijun Su
With the superior ductility and flexibility brought by compliant bodies, soft manipulators provide a nondestructive manner to grasp delicate objects, which has been developing gradually as a rising focus of soft robots. However, the unexpected phenomenon caused by environmental effects, leading to high internal nonlinearity and unpredictable deformation, makes it challenging to design, model, and control soft manipulators. In this paper, we designed a soft pneumatically actuated manipulator consisting of four soft actuators, as well as a flange, and investigated the influence of structural parameters on the output characteristics of the manipulator through finite element analysis (FEA). To enhance the bending deformation of the soft actuator, annular rings were employed on the soft actuator. A mathematical model for the bending deformation of air cavities was established to explore the relationship between the driving pressure and the bending angle based on the Yeoh strain energy function. Moreover, an end-output force model was established to depict the variation of the force output with the bending angle of the soft actuator, which was then experimentally validated by adopting the manufactured manipulator. The soft actuator studied in this paper can bend from 0° to 110° under an applied pressure of 0–60 kPa, and the maximum grasping load of the soft manipulator is 5.8 N. Finally, practical tests were conducted to assess the adaptability of the soft manipulator when grasping delicate fruits, such as apples, pears, tomatoes, and mangoes, demonstrating its broad application prospects in nondestructive fruit harvesting.

16 August 2023 in Sensors
Verified
Journal Article
Open access
PDF file
SHShuai Hu
Shuai Hu
RLRongjian Lu
Rongjian Lu
YZYinlong Zhu
Yinlong Zhu
WZWenhan Zhu
Wenhan Zhu
HJHongzhe Jiang
Hongzhe Jiang
SBSuzhao Bi
Suzhao Bi
Microneedle puncture is a standard minimally invasive treatment and surgical method, which is widely used in extracting blood, tissues, and their secretions for pathological examination, needle-puncture-directed drug therapy, local anaesthesia, microwave ablation needle therapy, radiotherapy, and other procedures. The use of robots for microneedle puncture has become a worldwide research hotspot, and medical imaging navigation technology plays an essential role in preoperative robotic puncture path planning, intraoperative assisted puncture, and surgical efficacy detection. This paper introduces medical imaging technology and minimally invasive puncture robots, reviews the current status of research on the application of medical imaging navigation technology in minimally invasive puncture robots, and points out its future development trends and challenges.

25 December 2025 in Sensors
Verified
Journal Article
Open access
PDF file
XWXu Wang
Xu Wang
JHJiahao Huang
Jiahao Huang
XJXuelei Z Jia
Xuelei Z Jia
YZYinlong Zhu
Yinlong Zhu
SXShuang Xi
Shuang Xi
Self-powered sensors, leveraging their integrated energy harvesting–signal sensing capability, effectively overcome the bottlenecks of traditional sensors, including reliance on external power resources, high maintenance costs, and challenges in large-scale distributed deployment. As a result, they have become a major research focus in fields such as flexible electronics, smart healthcare, and human–machine interaction. This paper reviews the core technical paths of six major types of self-powered sensors developed in recent years, with particular emphasis on the working principles and innovative material applications associated with frictional charge transfer and electrostatic induction, pyroelectric polarization dynamics, hydrovoltaic interfacial streaming potentials, piezoelectric constitutive behavior, battery integration mechanism, and photovoltaic effect. By comparing representative achievements in fields closely related to self-powered sensors, it summarizes breakthroughs in key performance indicators such as sensitivity, detection range, response speed, cyclic stability, self-powering methods, and energy conversion efficiency. The applications discussed herein mainly cover several critical domains, including wearable medical and health monitoring systems, intelligent robotics and human–machine interaction, biomedical and implantable devices, as well as safety and ecological supervision. Finally, the current challenges facing self-powered sensors are outlined and future development directions are proposed, providing a reference for the technological iteration and industrial application of self-powered sensors.

22 January 2025 in Sensors
Verified
Journal Article
Open access
PDF file
XWXu Wang
Xu Wang
YZYuelong zhang
Yuelong zhang
TZTian Zhang
Tian Zhang
GFGuanyu Fu
Guanyu Fu
YZYinlong Zhu
Yinlong Zhu
YLYing Liu
Ying Liu
This study aims to establish an equivalent parallel capacitance model for a copper/polydimethylsiloxane (Cu/PDMS) capacitive flexible pressure sensor and modulate its relative permittivity to optimize pressure sensing performance. The Cu/PDMS composite material is an ideal dielectric layer for sensors due to its high dielectric constant and tunable elasticity. By adjusting the different mixing ratios of PDMS and copper particles in micro size, the components and structure properties of the composite material can be modified, thereby affecting the electrical and mechanical performance of the sensor. We used finite element analysis (FEA) to model the sensor structure and studied the capacitance changes under various normal loading conditions to assess its sensitivity and distribution characteristics. Experimental results show that the sensor has good sensitivity and repeatability in the pressure range of 0 to 50 kPa. Additionally, we explored the effect of the addition of carbon black particles. It could be inferred that the added carbon black can enhance electrical properties due to its conductivity, which would be consequenced by the distribution optimization of Cu particles for carbon black’s low density, and it can mechanically restore some flexibility up to nearly 20%. Through these studies, our work can provide theoretical support for the design and application of flexible pressure sensors.