Guaranteeing security in information exchange is a challenge in public networks, such as in the highly popular application layer Message Queue Telemetry Transport (MQTT) protocol. On the one hand, chaos generators have shown their usefulness in masking data that can be recovered while having the appropriate binary string. Privacy can then be accomplished by implementing synchronization techniques to connect the transmitter and receiver, among millions of users, to encrypt and decrypt data having the correct public key. On the other hand, chaotic binary sequences can be generated on Rapsberry Pis that can be connected over MQTT. To provide privacy and security, the transmitter and receiver (among millions of devices) can be synchronized to have the same chaotic public key to encrypt and decrypt data. In this manner, this paper shows the implementation of optimized chaos generators on Raspberry Pis that are wirelessly connected via MQTT for the IoT protocol. The publisher encrypts data that are public to millions of interconnected devices, but the data are decrypted by the subscribers having the correct chaotic binary sequence. The image encryption system is tested by performing NIST, TestU01, NPCR, UACI and other statistical analyses.
This paper presents the application of three optimization algorithms to increase the chaotic behavior of the fractional order chaotic Chen system. This is achieved by optimizing the maximum Lyapunov exponent (MLE). The applied optimization techniques are evolutionary algorithms (EAs), namely: differential evolution (DE), particle swarm optimization (PSO), and invasive weed optimization (IWO). In each algorithm, the optimization process is performed using 100 individuals and generations from 50 to 500, with a step of 50, which makes a total of ten independent runs. The results show that the optimized fractional order chaotic Chen systems have higher maximum Lyapunov exponents than the non-optimized system, with the DE giving the highest MLE. Additionally, the results indicate that the chaotic behavior of the fractional order Chen system is multifaceted with respect to the parameter and fractional order values. The dynamical behavior and complexity of the optimized systems are verified using properties, such as bifurcation, LE spectrum, equilibrium point, eigenvalue, and sample entropy. Moreover, the optimized systems are compared with a hyper-chaotic Chen system on the basis of their prediction times. The results show that the optimized systems have a shorter prediction time than the hyper-chaotic system. The optimized results are suitable for developing a secure communication system and a random number generator. Finally, the Halstead parameters measure the complexity of the three optimization algorithms that were implemented in MATLAB. The results reveal that the invasive weed optimization has the simplest implementation.
Fractional-order chaotic oscillators (FOCOs) have shown more complexity than integer-order chaotic ones. However, the majority of electronic implementations were performed using embedded systems; compared to analog implementations, they require huge hardware resources to approximate the solution of the fractional-order derivatives. In this manner, we propose the design of FOCOs using fractional-order integrators based on operational transconductance amplifiers (OTAs). The case study shows the implementation of FOCOs by cascading first-order OTA-based filters designed with complementary metal-oxide-semiconductor (CMOS) technology. The OTAs have programmable transconductance, and the robustness of the fractional-order integrator is verified by performing process, voltage and temperature variations as well as Monte Carlo analyses for a CMOS technology of 180 nm from the United Microelectronics Corporation. Finally, it is highlighted that post-layout simulations are in good agreement with the simulations of the mathematical model of the FOCO.
In this paper, the parameter-switching technique was applied to control chaos in the Chen oscillator and as a decryption mechanism in a secure transmission system, to transmit RGB and grayscale images. In the past few decades, considerable efforts have been put into the study of the stabilization of chaotic dynamical systems. Most of the well-known chaos control methods, such as Ott, Grebogi, and Yorke (OGY), Pyragas, and open-loop methods, force an unstable periodic orbit into a stable one while distorting the original attractor. On the other hand, the parameter-switching technique is an elegant method that can synthesize an already-existing stable orbit, thereby preserving the underlying attractor. Consequently, the main contributions of this work were the FPGA realizations of the parameter-switching method and a secure image transmission system using a synchronized master and slave topology. The results of the parameter-switching technique and synchronization were verified using phase plots and time series. The chaos-encrypted image from the image transmission system, verified using correlation, showed no relativity with the original image, while the recovery of the decrypted image has no loss of quality. The encryption and decryption system was symmetric, whereby the key was private. In this work, co-simulations were performed in Active-HDL with MATLAB/Simulink, while the target FPGA board was the Xilinx’s Artix-7 AC701.
13 April 2021 in Mathematical Problems in Engineering
This paper considers a three-dimensional nonlinear dynamical system capable of generating spherical attractors. The main activity is the realization of a spherical chaotic attractor on Intel and Xilinx FPGA boards, with a focus on implementation of a secure communication system. The first major contribution is the successful synchronization of two chaotic spherical systems, in VHDL program, in a master-slave topology using Hamiltonian forms. The synchronization errors show that the two spherical chaotic systems synchronize in a very short time after which the error signals become zero. The second major contribution is the FPGA realization of a spherical chaotic attractor-based secure communication system, which involves encrypting both grayscale and RGB images with chaos and diffusion key at the transmitting system, sending the encrypted image via the state variables, and reconstructing the encrypted image at the receiving system. The Intel Stratix III and Xilinx Artix-7 AC701 results are the same as those of MATLAB. The statistical analyses of the encrypted and received images show that the implemented system is very effective, as it reveals high degree of randomness in the encrypted images with the entropy test, and the obtained correlation coefficient, which is zero, removes relativity between the original and encrypted images. Finally, the transmission system fully recovers the original grayscale and RGB images without loss of information.
The phase portrait for dynamic systems is a tool used to graphically determine the instantaneous behavior of its trajectories for a set of initial conditions. Classic phase portraits are limited to two dimensions and occasionally snapshots of 3D phase portraits are presented; unfortunately, a single point of view of a third or higher order system usually implies information losses. To solve that limitation, some authors used an additional degree of freedom to represent phase portraits in three dimensions, for example color graphics. Other authors perform states combinations, empirically, to represent higher dimensions, but the question remains whether it is possible to extend the two-dimensional phase portraits to higher order and their mathematical basis. In this paper, it is reported that the combinations of states to generate a set of phase portraits is enough to determine without loss of information the complete behavior of the immediate system dynamics for a set of initial conditions in an n-dimensional state space. Further, new graphical tools are provided capable to represent methodically the phase portrait for higher order systems.