Wen-Feng Zeng

Dr. Wen-Feng Zeng

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 October 2022 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YLYu-Zhong Liang
Yu-Zhong Liang
FCFu-Chang Chen
Fu-Chang Chen
WZWen-Feng Zeng
Wen-Feng Zeng
QCQing-Xin Chu
Qing-Xin Chu
The method of mode cancellation to design a two-port dielectric resonator antenna (DRA) for in-band full-duplex (IBFD) application is investigated in this communication. The whole antenna structure is straightforward, only composed of a single DRA element, a pair of feeding lines, and a pair of metallic probes. Attributing to the features of different modes used in this design, mutual coupling between the exciting port and the passive port can be suppressed to an extremely low level without using extra decoupling structure. A prototype is fabricated and measured for verification. The measured results demonstrate that the proposed antenna has broad bandwidth, and high isolation level can be achieved throughout the whole working band.

2 October 2023 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YLYu-Zhong Liang
Yu-Zhong Liang
FCFu-Chang Chen
Fu-Chang Chen
KXKai-Ran Xiang
Kai-Ran Xiang
WZWen-Feng Zeng
Wen-Feng Zeng
Here, a wideband two-port co-linearly polarized stacked patch antenna is investigated for in-band full-duplex (IBFD) applications. The initial antenna structure is composed of a single patch element and a pair of metallic probes. A mutual coupling dip is visibly observed in the band of interest without an extra decoupling structure. To further broaden the working and decoupling bandwidths, a stacked patch is introduced to obtain wideband characteristics of the antenna. Two transmission nulls occur in the passband at the same time. Characteristic mode analysis is used to elucidate the detailed decoupling mechanism. A proof-of-concept prototype is fabricated and measured. The measured results show that the proposed antenna operates from 3.23 GHz to 4.26 GHz, and the isolation between the two ports is higher than 20 dB over the working band.

4 January 2023 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
WZWen-Feng Zeng
Wen-Feng Zeng
FCFu-Chang Chen
Fu-Chang Chen
QCQing-Xin Chu
Qing-Xin Chu
In this communication, a bandwidth-enhanced antenna pair with a tunable electric field (E-field) null for the 5G mobile phone application is presented. The proposed antenna pair is composed of a stub-loaded inverted-F antenna (IFA) and a simple feeding network. The stub-loaded IFA can obtain a wider impedance bandwidth and a feeding network is designed to excite the orthogonal dipole mode and adjust the E-field null position. By adjusting the phase shifter in the feeding network, the E-field null can be moved to the feeding position of the IFA, achieving excellent isolation performance. A sub-6 GHz antenna pair is simulated and shows an isolation of better 16.5 dB within the N78 (3.3-3.8 GHz) band. By arranging the proposed antenna pair along two long edges of the ground plane, an 8×8 multiple-input multiple-output (MIMO) system is designed, fabricated, and measured. The measured results show that the MIMO system could achieve isolation of better than 19.5 dB and envelope correlation coefficients of lower than 0.03. The measured total efficiencies are greater than 43% for each port. The proposed antenna reveals a novel decoupling strategy for wider bandwidth while retain the isolation performance and compact size based on a pair of orthogonal mode.

15 March 2023 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Hang YuanHang Yuan
Hang Yuan
FCFu-Chang Chen
Fu-Chang Chen
WZWen-Feng Zeng
Wen-Feng Zeng
QCQing-Xin Chu
Qing-Xin Chu
Dual-band base station antenna array mainly suffers from the drawbacks of cross-band scattering and in-band coupling, which will disturb the radiation performances of the antennas, especially for the high-band (HB) antennas. In this paper, a dual-band base station antenna array with cross-band scattering and in-band coupling suppression is proposed. It contains a low scattering low-band (LB) crisscross-shaped dipole antenna codesigned with four square rings and four patches and a 2×2 HB antenna array. The crisscross-shaped dipole antenna is fed by four L-shaped strips, and a photonic bandgap (PBG) cell is loaded in the middle of each arm of the LB antenna to achieve HB-induced current scattering suppression without affecting the LB antenna, so the radiation patterns distortion from the cross-band scattering can be avoided. As the LB antenna employs crisscross structure, the four rings and patches can be integrated together with the LB antenna on the same substrate, which not only help to broaden the bandwidth, but also act as the array-antenna decoupling surface (ADS). With the codesign of LB antenna and ADS, no extra substrates are required for in-band decoupling. A dual-band base station antenna array prototype is fabricated and measured, showing good performances in LB and HB.

2 May 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
FCFu-Chang Chen
Fu-Chang Chen
YLYu-Zhong Liang
Yu-Zhong Liang
WZWen-Feng Zeng
Wen-Feng Zeng
KXKai-Ran Xiang
Kai-Ran Xiang
This paper implements a series-fed microstrip patch antenna with slant-polarization. A 45° inclined cross-shaped dual-polarized microstrip patch antenna array was investigated. The radiating elements are interconnected with conductive strips to minimize the influence of the out-of-phase phase currents on the radiation pattern, therefore significantly improving the broadside directivity of the antenna. A novel structure miniaturization scheme is proposed. The conductive strips are meandered to reduce the size of the antenna and the proposed antenna is designed. A pair of differential power dividers is utilized to replace the complex feeding network of the normal antenna array, thus simplifying the structure of the antenna. A prototype is then fabricated and measured to verify our design. The results show that the proposed dual-polarized three-element array operates from 3.4 GHz to 3.6 GHz with the advantages of high gain, simple feeding and low loss, which is attractive in high-directivity and dual-polarization applications.

7 October 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
WZWen-Feng Zeng
Wen-Feng Zeng
FCFu-Chang Chen
Fu-Chang Chen
YLYu-Zhong Liang
Yu-Zhong Liang
A simple and effective isolation enhancement method for the H-plane coupled metasurface antenna is proposed for the 5G indoor access point application. First, the characteristic mode analysis is conducted on two extremely closely placed metasurfaces to find out two pairs of desired resonant modes. Second, a via group is introduced to control the modal electric-field (E-field) cancellation degree at the unexcited antenna. The initial location of the decoupling vias is given by studying the superposed E-field variation. Benefiting from the stable distribution of the mode electric field around the resonant frequency, a high isolation level is achieved in a wide bandwidth. A slot-coupled feeding configuration is designed to validate the decoupling concept and a maximum isolation improvement of 27.4 dB is achieved. Finally, an experimental four-port multiple-input multiple-output (MIMO) antenna array is designed, and an isolation of better than 40 dB within 3.3-4.2 GHz is achieved. The proposed via-loading decoupling method based on CMA has promising prospects for massive MIMO applications.