Continuum robots always exhibit strong adaptability for exploring unstructured environments and high safety for achieving human-machine interactions. To further enhance their agility, it is imperative that these robots integrate both bending and elongation motion patterns. However, employing a unified actuation strategy will inevitably lead to motion coupling between these patterns, which poses a significant challenge in predicting and regulating morphing profiles. In this letter, inspired by the motion regulation observed in muscle fibers of elephant trunks, we proposed a hybrid-driven modular continuum robot. This robotic configuration enables the modulation of motion patterns through various approaches, thus achieving independent control of bending and elongation motions. Here, each backbone of the module not only produces an elongation rate of 62.76 ± 0.01% but also morphs into a bending profile with an angle of 35.53 ± 1.18°. Then, through theoretical and experimental investigations on a one-segment continuum robot composed of three modules, we illustrated that segregating the actuation approaches for bending and elongation motion patterns effectively mitigates motion coupling, enhancing the motion accuracy of continuum robots. In addition, we also demonstrated the versatility of a two-segment continuum robot, which morphs into diverse profiles for grasping, moving, and releasing items by combining different motion patterns.
Equipping unmanned aerial vehicles (UAVs) with bistable robotic grippers allows them to perch on natural and artificial structures, extending mission duration by minimizing energy consumption during stationary operations. However, achieving both compliant triggering and powerful grasping remains a important challenge, particularly in the absence of active actuators. In this work, we present a magnetic tensegrity-enabled robotic gripper (MTRG) with an adaptive energy barrier by leveraging nonlinear interaction forces between magnets. This physical intelligence enables our MTRG to merge both sensitivity and strength, showcasing a failure-to-triggering force ratio exceeding 2 orders of magnitude, which allows for customized responses to varying interaction requirements. This capability involves gentle triggering and robust grasping, analogous to the behavior exhibited by bats. To enable repeated operation, an integrated inflatable airbag is used to reset the bistable system, allowing for multiple grasping behaviors without manual intervention. When integrated into UAVs, MTRGs showcase reliable perching abilities across diverse scenarios, highlighting the potential of passive mechanisms for enhancing the adaptability of energy barriers to achieve long-duration and high-altitude operations.
Drawing inspiration from the intricate soft structures found in nature, soft actuators possess the ability to incrementally execute complex tasks and adapt to dynamic and interactive environments. In particular, the integration of sensor data feedback allows actuators to respond to environmental stimuli with heightened intelligence. However, conventional rigid sensors are constrained by their inherent lack of flexibility. The current manufacturing processes for flexible sensors are complex and fail to align with the inherent simplicity of soft actuators. In this study, to facilitate the straightforward and consistent sensing of soft pneumatic actuators, carbon–polydimethylsiloxane (CPDMS) materials were employed, utilizing 3D printing and laser-cutting techniques to fabricate a flexible sensor with ease. The preparation of standard tensile specimens verified that the sensor exhibits a fatigue life extending to several hundred cycles and determined its gauge factor to be −3.2. Experimental results indicate that the sensor is suitable for application in soft pneumatic actuators. Additionally, a printed circuit board (PCB) was fabricated and the piecewise constant curvature (PCC) kinematic method was utilized to enable real-time pose estimation of the soft pneumatic actuator. Compared with computer vision methods, the pose estimation error obtained by the sensing method is as low as 4.26%. This work demonstrates that this easily fabricated sensor can deliver real-time pose feedback for flexible pneumatic actuators, thereby expanding the potential application scenarios for soft pneumatic actuators (SPAs).
19 October 2026 in International Journal of Mechanical Sciences