Mohamad Zul Hilmey Makmud

Dr. Mohamad Zul Hilmey Makmud

Universiti Malaysia Sabah, Kota Kinabalu, Sabah, Malaysia
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 June 2018 in Energies
Verified
Journal Article
Open access
PDF file
SDSAMEH DABBAK
SAMEH DABBAK
HIHazlee Azil Illias
Hazlee Azil Illias
BABee Chin Ang
Bee Chin Ang
NLNURUL AIN ABDUL LATIFF
NURUL AIN ABDUL LATIFF
Mohamad Zul Hilmey MakmudMohamad Zul Hilmey Makmud
Mohamad Zul Hilmey Makmud
In high-voltage insulation systems, the most commonly used material is polymeric material because of its high dielectric strength, high resistivity, and low dielectric loss in addition to good chemical and mechanical properties. In this work, various polymer compounds were prepared, consisting of low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), HDPE/PP, and LDPE/PP polymer blends. The relative permittivity and breakdown strength of each sample types were evaluated. In order to determine the physical properties of the prepared samples, the samples were also characterized using differential scanning calorimetry (DSC). The results showed that the dielectric constant of PP increased with the increase of HDPE and LDPE content. The breakdown measurement data for all samples were analyzed using the cumulative probability plot of Weibull distribution. From the acquired results, it was found that the dielectric strengths of LDPE and HDPE were higher than that of PP. Consequently, the addition of LDPE and HDPE to PP increased the breakdown strength of PP, but a variation in the weight ratio (30%, 50% and 70%) did not change significantly the breakdown strength. The DSC measurements showed two exothermic crystallization peaks representing two crystalline phases. In addition, the DSC results showed that the blended samples were physically bonded, and no co-crystallization occurred in the produced blends.

2 February 2018 in Energies
Verified
Journal Article
Open access
PDF file
Mohamad Zul Hilmey MakmudMohamad Zul Hilmey Makmud
Mohamad Zul Hilmey Makmud
HIHazlee Azil Illias
Hazlee Azil Illias
YCYern Chee Ching
Yern Chee Ching
MSMOHD SANI SARJADI
MOHD SANI SARJADI
Nowadays, studies of alternative liquid insulation in high voltage apparatus have become increasingly important due to higher concerns regarding safety, sustainable resources and environmentally friendly issues. To fulfil this demand, natural ester has been extensively studied and it can become a potential product to replace mineral oil in power transformers. In addition, the incorporation of nanoparticles has been remarkable in producing improved characteristics of insulating oil. Although much extensive research has been carried out, there is no general agreement on the influence on the dielectric response of base oil due to the addition of different amounts and conductivity types of nanoparticle concentrations. Therefore, in this work, a natural ester-based nanofluid was prepared by a two-step method using iron oxide (Fe2O3) and titanium dioxide (TiO2) as the conductive and semi-conductive nanoparticles, respectively. The concentration amount of each nanoparticle types was varied at 0.01, 0.1 and 1.0 g/L. The nanofluid samples were characterised by visual inspection, morphology and the dynamic light scattering (DLS) method before the dielectric response measurement was carried out for frequency-dependent spectroscopy (FDS), current-voltage (I-V), and dielectric breakdown (BD) strength. The results show that the dielectric spectra and I-V curves of nanofluid-based iron oxide increases with the increase of iron oxide nanoparticle loading, while for titanium dioxide, it exhibits a decreasing response. The dielectric BD strength is enhanced for both types of nanoparticles at 0.01 g/L concentration. However, the increasing amount of nanoparticles at 0.1 and 1.0 g/L led to a contrary dielectric BD response. Thus, the results indicate that the augmentation of conductive nanoparticles in the suspension can lead to overlapping mechanisms. Consequently, this reduces the BD strength compared to pristine materials during electron injection in high electric fields.

30 August 2021 in Polymers
Verified
Journal Article
Open access
PDF file
SUSITI NUR KHALIDAH USRI
SITI NUR KHALIDAH USRI
Zuhair JamainZuhair Jamain
Zuhair Jamain
Mohamad Zul Hilmey MakmudMohamad Zul Hilmey Makmud
Mohamad Zul Hilmey Makmud
Hexachlorocyclotriphosphazene is a ring compound consisting of an alternating phosphorus and nitrogen atom with two chlorine substituents attached to the phosphorus atom. The six chlorine atoms attached to this cyclo compound can be substituted with any different nucleophile that leads to changes in different chemical and physical properties. The major topics that were investigated in this research are the flame retardancy and dielectric properties of cyclotriphosphazene compounds. Cyclotriphosphazene compounds have high potential to act as a flame retardant, and this compound consists of two active elements attributed to its high flame-retardant character. This compound also demonstrated good ability as a flame retardant due to its low toxicity and less smoke produced. In addition, cyclotriphosphazene compounds were also investigated for their dielectric properties. Cyclotriphosphazene has high potential in the electrical field since it has dielectric properties that can be widely studied in the investigation of any potential application. This review presented literature studies focused on recent research development and studies in the field of cyclotriphosphazene that focused on synthesis, structural, flame retardancy, and dielectric properties of hexachlorocyclotriphosphazene compounds.

11 March 2019 in Materials
Verified
Journal Article
Open access
PDF file
Mohamad Zul Hilmey MakmudMohamad Zul Hilmey Makmud
Mohamad Zul Hilmey Makmud
HIHazlee Azil Illias
Hazlee Azil Illias
YCYern Chee Ching
Yern Chee Ching
SDSAMEH DABBAK
SAMEH DABBAK
This study provides a thorough investigation of partial discharge (PD) activities in nanofluid insulation material consisting of different types of nanoparticles, which are conductive and semiconductive when subjected to high voltage stress is presented. Nanofluids have become a topic of interest because they can be an alternative to liquid insulation in electrical apparatus due to their promising dielectric strength and cooling ability. However, during in-service operation, PDs can occur between conductors in the insulation system. Therefore, this study presents the behavior of PDs within nanofluid dielectric materials consisting of conductive and semiconductive nanoparticles. The results show that there is an improvement in the PD resistance and a reduction in the tan delta of nanofluids at power frequency after the incorporation of conductive or semiconductive nanoparticles in the nanofluid oil. However, the most suitable concentration of conductive and semiconductive nanoparticles in the base fluid was found to be, respectively, 0.01 g/L and 1.0 g/L at PD inception and PD steady-state conditions. The clustering of nanoparticles in a nanofluid suspension due to PD activities is also discussed in this study.

21 August 2022 in Crystals
Verified
Journal Article
Open access
PDF file
Zuhair JamainZuhair Jamain
Zuhair Jamain
AAAhmad Nor Asyraf Azman
Ahmad Nor Asyraf Azman
NRNurul Asma Razali
Nurul Asma Razali
Mohamad Zul Hilmey MakmudMohamad Zul Hilmey Makmud
Mohamad Zul Hilmey Makmud
Over the last decades, liquid crystalline has been of great recent importance due to many unique and different features. The linking unit, terminal group, and core system are the most factors to influence the liquid crystal behaviour. Schiff base linkage with the formula of -C=N- can maintain linearity by providing the stepped core structure with high stability. Incorporation of Schiff base linkage in cyclotriphosphazene system enhances the mesophase characteristic and high thermal stability. This review focussed on the mesophase behaviour and physical properties of cyclotriphosphaze derivatives attached to Schiff base linkages. A basic introduction to liquid crystalline materials, including description and classification, is provided in this review.

24 June 2019 in Electronics
Verified
Journal Article
Open access
PDF file
FEFUAD ERMAN
FUAD ERMAN
EHEffariza Hanafi
Effariza Hanafi
ELEng Hock Lim
Eng Hock Lim
WMWan Amirul Wan Mohd Mahyiddin
Wan Amirul Wan Mohd Mahyiddin
S. W. HarunS. W. Harun
S. W. Harun
Mohamad Zul Hilmey MakmudMohamad Zul Hilmey Makmud
Mohamad Zul Hilmey Makmud
This article describes the design of an Ultra-High Frequency (UHF) miniature folded dipole Radio Frequency Identification (RFID) tag antenna that can be mountable on metallic objects. The compact tag antenna is formed from symmetric C-shaped resonators connected with additional arms embedded into the outer strip lines for miniaturization purposes. It is loaded with outer strip lines, resulting in a flexible tuning method that is capable of matching the integrated circuit (IC) chip’s impedance. The proposed tag is fabricated on a single layer of Polytetrafluoroethylene (PTFE) substrate. It has simple structure and does not require any metallic vias or shorting plate. The miniature tag antenna with a size of 82.75 × 19.5 × 1.5   mm 3 yields a total realized gain of − 0.53   dB at the resonance frequency when attached to a 40 × 40   cm 2 metal plate. The presented design utilizes a European RFID band, and the simulated results of realized gain, read range, and input impedance are verified with measurement results.