From the perspective of resource recovery and environmental protection, coal gangue-fly ash cemented backfill coal mining has become an important direction for the green development of coal mines in recent years. Analysis of the rheological parameters of backfill slurry is the basic principle to design a backfill pipeline system. Coal gangue-fly ash backfill slurry has a mass concentration of 76% to 79% and a maximum particle size 20 mm. Therefore, it is difficult to use conventional rheometers for experimental analyses of the rheological parameters of such fluids. We developed a rheometer for high-concentration coal gangue backfill slurry (HCGS rheometer) based on the coal gangue-fly ash backfill practice of Gonggeying Mine, and analyzed the rheological properties of the backfill slurry. The experimental results showed that the Reynolds number of the coal gangue-fly ash backfill slurry was much smaller than the critical Reynolds number, indicating the flow state in the pipeline was laminar. Based on these results, it may be more appropriate to control the mass concentration to 77% to 78%, and the suggested fly ash content is 25%. This work provides a scientific basis to optimize the backfill parameters and pipeline system in coal mines.
When used as filling aggregates, the physical and mechanical properties of gangue and fly ash are crucial for the design of filling and transportation systems. The mineral composition of gangue and fly ash affects the filling body’s strength, and the fluidity of the slurry affects the mining engineering process. In this study, gangue and fly ash samples were characterized by X-ray diffraction to ensure their suitability as filling materials. Tests were carried out with an Intelligent Torque Rheometer, and the optimal ratio of the slurry’s components was determined. After fitting the data using ORIGIN software, the following curves were obtained: (1) rheological parameters versus slurry mass fraction; (2) rheological parameters versus component ratio. On the basis of the curves, the recommended ratio of the components in the paste-like slurry was determined. We found that the mass concentration of the slurry must be kept strictly below 78%, and the optimal slurry composition includes coal gangue, fly ash, and a gelling agent at a weight ratio of 8:3:1. In order to illustrate the effectiveness of the filling technology, surface sink curves from different filling techniques in two closely situated positions of the Xinyang Coal Mine were compared. The results showed that the use of a paste-like slurry can effectively reduce surface subsidence. Furthermore, it will lead to cost-effective engineering designs for the sustainable development of coal mines.
Thawing of permafrost substantially affects the local environment and global energy balance. When salt water overlays permafrost, Rayleigh-Darcy (R-D) instability emerges because of the density mismatch and regulates melting (thawing) dynamics. Contrary to expectations that a higher Rayleigh number ( R ) would amplify instability, our experiments revealed fingering and stable melting fronts at low and high R , respectively. We attribute the occurrence of the two melting patterns to the interplay between two competing flow structures: local circumfluence modulated by front perturbation and transversal chaotic mixing. We propose theories that rationalize the melting pattern transition and finger-scale evolution. In addition, the classic mass transport theory for R-D convection drastically underestimates the melting rate and misses key variable(s). The presence of fingering patterns and accelerated dynamics may have led to earlier penetration of the permafrost layer than previously anticipated. These findings have implications for understanding similar processes in magma migration, carbon sequestration, and subsurface energy recovery.
26 May 2026 in International Journal of Heat and Mass Transfer
Natural interfaces in porous media are rarely flat. Common examples include dissolution fronts in carbon sequestration and thawing fronts in permafrost. These interfaces typically exhibit complex and wavy topographies. Previous studies have extensively examined the onset of convection triggered by random roughness. However, the hydrodynamic regulation exerted by finite-amplitude and deterministic topography remains poorly understood. This study investigates mass transfer dynamics across a fixed wavy boundary characterized by varying wavenumber (n) and amplitude (e). Our simulations reveal three distinct transport regimes. First, in the low Rayleigh number (Ra) regime, wavy topography unconditionally disrupts hydrostatic equilibrium. This differs from flat boundaries where transport remains purely diffusive below a critical threshold. The wavy geometry induces weak convective flows that enhance mass transfer. Second, in the transition regime, increasing the amplitude monotonically enhances the Sherwood number (Sh). Third, in the convection-dominated high Ra regime, we observe a counter-intuitive behavior. Large-amplitude boundaries with low wavenumbers significantly degrade mass transfer efficiency. This degradation is attributed to a "hydrodynamic shielding effect." Deep troughs entrap stagnant fluid and reduce the active surface area for exchange. Statistical analysis shows that this shielding effect leads to a state of "bulk saturation." In this state, the domain is dominated by high-density fluid. These findings challenge the conventional view that roughness invariably promotes mixing. They also provide new scaling insights for predicting solute transport in heterogeneous geological formations.
Natural convection in porous media is extensively studied assuming flat boundaries, yet realistic geological and engineering interfaces often exhibit non-straight geometries. This study investigates the impact of non-straight bottom boundaries on Rayleigh-Darcy convection via numerical simulations over a wide range of Rayleigh numbers (Ra = 1 to 3×10^5). We identify a critical "crossover" phenomenon in heat transfer efficiency (Nu/Ra) relative to the classical straight-boundary case. In the diffusion-dominated and transitional regimes (Ra < 1300), the non-straight boundary triggers localized convection and increases the effective heat transfer surface, thereby enhancing the overall efficiency by up to 2.43 times (at Ra = 1). Conversely, in the vigorous convection regime (Ra > 1300), the heat transfer efficiency drops below that of the straight boundary. Flow field and density distribution analyses reveal that this suppression is driven by the formation of stagnant "dead zones" within the boundary troughs. These stagnant pockets create a "thermal short-circuit" where active convection bypasses the troughs, reducing the effective convective height by the non-straight boundary amplitude and decreasing the heat transfer efficiency by approximately 32% at Ra = 3×10^5. Rigorous scaling analysis confirms that flow stratification causes the deviation from classical GL predictions at high Ra. These findings provide a unified physical framework for understanding how non-straight boundary regulates heat transport in porous media.