Hao Wang

Dr. Hao Wang

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 November 2018 in Processes
Verified
Journal Article
Open access
PDF file
HWHao Wang
Hao Wang
JJJian Jiao
Jian Jiao
YWYumin Wang
Yumin Wang
WDWeisheng Du
Weisheng Du
When used as filling aggregates, the physical and mechanical properties of gangue and fly ash are crucial for the design of filling and transportation systems. The mineral composition of gangue and fly ash affects the filling body’s strength, and the fluidity of the slurry affects the mining engineering process. In this study, gangue and fly ash samples were characterized by X-ray diffraction to ensure their suitability as filling materials. Tests were carried out with an Intelligent Torque Rheometer, and the optimal ratio of the slurry’s components was determined. After fitting the data using ORIGIN software, the following curves were obtained: (1) rheological parameters versus slurry mass fraction; (2) rheological parameters versus component ratio. On the basis of the curves, the recommended ratio of the components in the paste-like slurry was determined. We found that the mass concentration of the slurry must be kept strictly below 78%, and the optimal slurry composition includes coal gangue, fly ash, and a gelling agent at a weight ratio of 8:3:1. In order to illustrate the effectiveness of the filling technology, surface sink curves from different filling techniques in two closely situated positions of the Xinyang Coal Mine were compared. The results showed that the use of a paste-like slurry can effectively reduce surface subsidence. Furthermore, it will lead to cost-effective engineering designs for the sustainable development of coal mines.

13 August 2019 in Arabian Journal of Geosciences
Verified
Journal Article
Closed access
PDF file
HWHao Wang
Hao Wang
CZChengwei Zhao
Chengwei Zhao
SCSicheng Chen
Sicheng Chen

2 March 2023 in Minerals
Verified
Journal Article
Open access
PDF file
HWHao Wang
Hao Wang
QWQi Wang
Qi Wang
YHYuxin Hao
Yuxin Hao
YWYingying Wang
Yingying Wang
BTBurui Ta
Burui Ta
JMJian Meng
Jian Meng
Coal mining produces a large amount of gangue that pollutes the environment, causing surface subsidence and damaging the groundwater systems. Backfill mining is an effective technology used to solve this problem, but there is a risk of polluting the groundwater due to the heavy metal ions present in the backfill material. Pb2+ has been determined to be a representative element because of its existence in coal gangue samples but not in fly ash. The risk of gangue-based cemented backfill causing groundwater pollution can be evaluated by studying the Pb2+ leaching from gangue under various conditions. When comparing the leaching amounts of Pb2+ from the coal gangue particles and the test blocks, it was found that cement filling has an obvious consolidation effect on the Pb2+ in coal gangue. The above process shows that cemented backfill has an obvious consolidation effect on the Pb2+ in gangue. The results of the theoretical analysis, X-ray, and SEM show that the consolidation mechanism can be divided into four modes: physical encapsulation, ion exchange, ion adsorption, and chemical reaction. The results are of great significance for revealing the leaching mechanism of the heavy metals in coal gangue, assessing the risk of heavy metal pollution in groundwater via gangue-cemented backfill, and improving the mining theory of the gangue-cemented filling and groundwater protection.

1 September 2024 in Processes
Verified
Journal Article
Open access
PDF file
PDPengchu Ding
Pengchu Ding
HWHao Wang
Hao Wang
JZJianjian Zhao
Jianjian Zhao
SYShiheng Yan
Shiheng Yan
LCLiwu Chang
Liwu Chang
JYJie Yang
Jie Yang
Prior to being released, the top coal of a fully mechanized caving face typically experiences the effects of mining-induced pressure and disturbances from the hydraulic support’s canopy. To investigate the promoting effect of canopy disturbances in the support-controlled area on the damage of top coal during fully mechanized top-coal caving mining, block instability theory and discrete block numerical simulation methods were employed. The instability modes during the initial support and cyclic disturbance stages were analyzed. The fracture evolution and displacement distribution curves were studied for coal bodies with strengths of 3.1 MPa, 15.0 MPa, and 29.5 MPa under the mining influence and support strengths of 0.5 MPa, 1.0 MPa, and 1.5 MPa during the initial support and cyclic disturbance processes. The results showed that during the initial support stage, the instability of the block-structured coal body exhibited four modes as follows: inter-block breakage, inter-block delamination, intra-block fracture expansion, and inter-block sliding. During the cyclic disturbance stage, the coal body instability showed three modes as follows: inter-block sliding, intra-block fracture expansion, and inter-block rotation. The disturbance from the support had little impact on the fragmentation of both low-strength and high-strength coal bodies. However, small support forces combined with multiple cycles of disturbance had an enhancing effect on the instability of medium-strength block-structured top coal.

1 April 2024 in PLOS ONE
Verified
Journal Article
Open access
PDF file
HWHao Wang
Hao Wang
QWQi Wang
Qi Wang
TGTongwen Gao
Tongwen Gao
JWJun Wang
Jun Wang
CSChi Sun
Chi Sun
BTBurui Ta
Burui Ta
Backfill mining is an effective way to solve environment pollute, surface subsidence, and groundwater system damage which caused by coal mining. However, the complex underground environment may change the physical and mechanical properties of the backfill body, which poses a risk of strength failure. This paper analyzed the failure of gangue-based cemented backfill body which made up of gangue and fly ash. The results show that physicochemical reactions will generate quartz, kaolinite, and other high-strength substances; hydration reaction between the fine particles will generate hydrocalcium silicate and other C-S-H gels, they wrapped gangues as a whole, which provide a high strength of the cemented backfill body. Several experiments were carried out in order to find the reason for failure in samples under loads. The conclusion drawn as following: (1) When the load is large, the cracks extend from the surface of the samples to the interior, at the same time, the length and width of the cracks increasing obviously and connecting as net. Especially the external load exceeds the peak intensity. (2) The relationship between sample failure and pores is weak, but obvious with crack development, especially the cracks connected as a net. (3) The interface structure formed by gangue is an important source of crack development and, thus, will stimulate the development of cracks.

29 August 2025 in PLOS ONE
Verified
Journal Article
Open access
PDF file
HWHao Wang
Hao Wang
YHYuxin Hao
Yuxin Hao
ZJZhongmin Ji
Zhongmin Ji
ZTZihan Tang
Zihan Tang
DPDing Pengchu
Ding Pengchu
Paste-like slurry which made up of gangue particles and fly ash consolidated in the goaf could effectively reduce surface subsidence and improve resource recovery. The technology relies on efficient transport. However, there are many pipeline explosion accidents caused by water hammer due to rapid valve closure. The density and elasticity modulus of the paste-like slurry are significantly greater than other fluids. That makes the pressure exerted on the pipeline and valve by the slurry water hammer is significantly greater than the other fluids. The research established the relationship between valve closing time and peak pressure using dynamic meshes combining theoretical analysis and numerical simulations. The results show that the velocity at which the valve closes significantly affects the pressure on the valve and nearby pipelines. However, when the valve large open, the impact only on the local flow velocity and has no substantial impact on the flow state throughout the system. Finally, the optimal closing time of the butterfly valve was determined by comparing pressure magnitudes.. The paper focuses on the phenomenon of water hammer in dense slurries, which is different from other fluids. However, theoretical and simulation models have reference value for the study of other fluid water hammer.