This contribution presents charge-based capacitive self-sensing with a continuous full state observer for a parametrically driven resonant electrostatic 1D MEMS mirror considering precise and seamless estimation. Based on current integrators, series capacitances or a capacitance network the direct charge self-sensing principles are investigated and compared considering leakage currents, precision and a minimum implementation effort. In comparison to the other charge sensing methods, the proposed methods directly measure the charge changes while the drive voltage is switched on. Since resonant MEMS mirrors are driven by a rectangular signal, the direct self-sensing implies a lack of data when the drive voltage is switched off. A nonlinear observer is also proposed to estimate the full mirror state continuously based on an identified MEMS mirror model. The capacitive charge self-sensing methods achieve overall a high sensing precision of less than 0.14 % RMSE and the observer estimation error of the full state is below 1 % peak-to-peak error regardless of the availability of the charge self-sensing measurements, demonstrates accurate continuous full state estimation. [2021-0130]
In this paper, we present a compact SPICE model of an analog switching memristive device based on niobium oxide and investigate the functionality of the same as a synapse element through its compact model by utilizing it in a simulation of an 8x8 resistive crossbar array. Considering especially the von Neumann bottleneck for neural network computing tasks, memristive crossbar arrays offer a potential in-memory computing solution performing highly parallel matrix-vector multiplication and reducing the energy consumption. In particular, multi-level switching memristive devices with intrinsic self-compliance are predestined for crossbar operations. Based on experimental results of a bi-layer Ti/Al2 O3/Nb2O5/Ti stack, a compact physical model was recently derived, assuming an underlying Poole-Frenkel emission mechanism. High model accuracy in terms of I-V behaviors, dynamic route map and power exponent plots were demonstrated by fitting the nonlinear I-V relation and the state function to measurement data, verifying analog gradual switching for the voltage driven extended memristor. In this paper the SPICE implementation for the core memductance accompanied by a parallel and series resistor is introduced and its application for sense analysis via analog and multi-memristor circuit exploitation is presented. Adopting the SPICE model, the switching dynamics is investigated and discussed for performing synaptic potentiation and depression behavior in a potential crossbar application.
Zusammenfassung: Breitbandig durchstimmbare Infrarotstrahlung im mittleren Wellenlängenbereich von etwa 3 bis 10 µm bzw. 1000 bis 3200 Wellenzahlen kann effizient zur Spektroskopie gasförmiger, flüssiger oder fester Stoffe und Gemische verwendet werden. In diesem Beitrag wird ein neuartiges quasi-statisches mikro-opto-elektro-mechanisches (MOEMS) Gitter zur spektralen Durchstimmung einer Infrarotlichtquelle auf Basis eines Quantenkaskadenlasers (QCL) vorgestellt. Das Konzept vereint die Vorteile breitbandiger Quellen mit denen kohärenter Laserquellen in einem miniaturisierten Aufbau. Das quasi-statische Antriebsprinzip erlaubt im Gegensatz zur resonanten Bewegung das Scannen mit vorgegebenen Trajektorien und einstellbarer Geschwindigkeiten und damit eine höhere spektrale Auflösung. Zur Stabilisierung der Bewegung wird MOEMS-Bauelement mittels integrierter Positionssensoren geregelt. Dieser Beitrag stellt die dynamischen Eigenschaften eines MOEMS-Mikrospiegels mit integriertem Beugungsgitter, sowie die damit gewonnenen experimentellen Ergebnisse beim Durchstimmen eines QCL im Bereich von 4150 bis 4600 nm Wellenlänge vor.