Landslides are a worldwide occurring hazard that can produce economic impact and even fatalities. The collection and monitoring of data regarding active landslides are important for predicting future landslides in that region, and is critical to minimize the losses caused. In the expanding metropolitan area of Cluj-Napoca, Romania, drastic changes of land use and increasement of construction zones represent a current evolution issue. The urban sprawl phenomenon imposed the expansion of the city limits and outside the old built-up area, and due to the hilly terrain and geomorphology, natural hazards such as landslides and erosion processes are susceptible to appearance or reactivation. The study incorporates interdisciplinary research composed of evaluation of a landslide susceptible hotspot located in an area of interest to the municipality by means of geodetic and topographic precise measurements, combined with the use of unmanned aerial vehicles (UAV) monitoring of surface movement and GIS spatial analysis. The data obtained in a span of over two years reveal that the investigated slope is subjected to a shallow active landslide of a few centimeters per year, and based on the 64 individual placed landmarks the highest displacement value was 67 mm. Through geomatic tools the exchange rate of the slope surface was evaluated with comprehensive volume calculations, such as displacement, erosion, and accumulation that illustrate a volume of material displaced of 107.2 m³ and the accumulated one of 55.7 m³. The results provide valuable insight into the complex landslide and erosion dynamics that are crucial when predicting future movements and prevention measures.

The Transylvanian region of Romania is a place of rich history since ancient times, where the original natural environment around architectural heritage sites or buildings has not been severely altered by urban development. Unfortunately, many such places are left by the authorities to degrade or totally collapse for lack of funds, vision or initiatives. The current paper addresses the potential of Unmanned Aerial Vehicles (UAVs) in the assessment of a viable and feasible prospect of restoration on a 19th century mansion that belonged to a nobiliary family. UAV use is rising in many industries and has become very popular in the last decade, but for survey engineering and related domains they represent a quantum leap in technology. Integrating UAV-acquired data and structure from motion software, has enabled modern techniques to obtain useful metrics from the field, accurate photorealistic 3D models for visual inspection, structural damage analyses, architectural rehabilitation-restoration, conservation and spatial analysis of the surrounding area. In this work a socio-cultural planning and design process is explored and presented to improve the local community and inclusion in a tourist circuit based on the regional potential, as well as an evaluation of accessibility derived from a vector-raster database that highlights the central position of the cultural heritage in regards to the axis of circulation between the important metropolitan areas and the local tourist attractions. This established workflow of modern topographic and construction measurements is fully integrable into the architectural process, building information modelling, heritage conservation and reconstruction.

Slope failures and landslides cause economic damage and deaths worldwide. These losses can be minimized by integrating different methodologies, instruments, and data monitoring to predict future landslides. In the constantly growing metropolitan area of Cluj-Napoca, Romania, changes in land cover, land use, and build-up areas are an issue. The unprecedented urban sprawl pushed the city limits from the Somes River to hilly terrain prone to landslides and erosion. This study focuses on a landslide-prone area where a previous slope failure caused significant economic losses. It combines topo-geodetic measurements, UAV monitoring of surface displacement, GIS spatial analysis, ground-penetrating radar investigations, and geotechnical assessment. Two years of data show that the slope is undergoing surface erosion, with soil displacements of a few centimeters. Geodetic monitoring of the retaining wall’s control points indicates a small rotation. Coupled with georadar profile imaging showing changes in soil and rock layers with an uplift trend, it was deduced that the area suffers from a global instability. The findings provide valuable information about the dynamics of landslides and erosion for forecasting future movements and developing preventative strategies based on a new methodology that combines affordable and prevalent instrumentation and techniques.

Watercourses act like a magnet for human communities and were always a deciding factor when choosing settlements. The reverse of these services is a potential hazard in the form of flash flooding, for which human society has various management strategies. These strategies prove to be increasingly necessary in the context of increased anthropic pressure on the floodable areas. One of these strategies, Strategic Flood Management (SFM), a continuous cycle of planning, acting, monitoring, reviewing and adapting, seems to have better chances to succeed than other previous strategies, in the context of the Digital-Era Governance (DEG). These derive, among others, from the technological and methodological advantages of DEG. Geographic Information Systems (GIS) and Unmanned Aerial Vehicles (UAV) stand out among the most revolutionary tools for data acquisition and processing of data in the last decade, both in qualitative and quantitative terms. In this context, this study presents a hybrid risk assessment methodology for buildings in case of floods. The methodology is based on detailed information on the terrestrial surface—digital surface model (DSM) and measurements of the last historical flash flood level (occurred on 20 June 2012)—that enabled post-flood peak discharge estimation. Based on this methodology, two other parameters were calculated together with water height (depth): shear stress and velocity. These calculations enabled the modelling of the hazard and risk map, taking into account the objective value of buildings. The two components were integrated in a portal available for the authorities and inhabitants. Both the methodology and the portal are perfectible, but the value of this material consists of the detailing and replicability potential of the data that can be made available to administration and local community. Conceptually, the following are relevant (a) the framing of the SFM concept in the DEG framework and (b) the possibility to highlight the involvement and contribution of the citizens in mapping the risks and their adaptation to climate changes. The subsequent version of the portal is thus improved by further contributions and the participatory approach of the citizens.

In the highly populated analysed territory, the expansion of the construction zones and the pressure imposed on the slopes by the housing and transport infrastructure led to the appearance and reactivation of mass movement processes that affects the population and the environment. The purpose of this study consist in applying the principles of bivariate statistical analysis in order to determine the dynamic potential of a territory, taking into account the statistical relationship between the independent variables represented by predisposing and triggering factors of landslides (slope, geology, land use etc.) and dependent variables, in this case: landslides. The identification of the degree of validation of the results was determined by calculating the AUROC (Area under the Receiver Operating Characteristic) value, whose value of 0.854 highlights the representativeness of the chosen model. The analysis of landslides susceptibility highlights the inclusion of the territory represented by the hills surrounding Cluj-Napoca metropolitan area, Romania, on the classes of spatial occurrence of these processes.

The accentuated dynamics of the real estate markets of the last 20 years, determined that a large part of the territories in the immediate vicinity of the big urban centers, to change their category of land use, in an accelerated rhythm. Most of the time, the land use changes according to the market requirements, the predominantly agricultural lands being occupied by constructions with residential or industrial functions. Identifying these changes is a difficult task due to the heterogeneity of spatial databases that come from different real estate development projects, so determining and implementing new methods to track land changes are currently highly required. This paper presents a methodologically innovative index-based approach for the rapid mapping of built-up areas, using Landsat-5, Landsat-7, and Landsat-8 satellite imagery. The approach described in this study differs from other conventional methods by the way the analysis was performed and also by the thematic indices used in the processes of built-up area delineation. The method, structured in a complex model, based on Remote Sensing and GIS techniques, can be divided into three distinct phases. The first stage is related to the pre-processing of the remote sensing data. The second stage involves the calculation of the normalized difference vegetation index (NDVI), the modified normalized difference water index (MNDWI), and the bare soil index (BI) correlated with the extraction of all areas not covered by vegetation; respectively, the elimination from the result of all areas covered by water, bare land, or uncultivated arable land. The result of this stage is represented by a distinct thematic layer that contains only built-up areas and other associated territories. The last step of the model is represented by the validation of the results, which was performed based on statistical methods and also by direct comparison with field reality, obtaining a validation coefficient which is generally above 85% for any of the methods used. The validation process shows us that by applying this method, the fast mapping of the built-up areas is significantly enhanced and the model is suitable to be implemented on a larger scale in any practical and theoretical application that aims at the rapid mapping of the built-up areas and their evolutionary modeling.