Concentration gradient generators are common components of microfluidic devices when specified mixing ratios have to be acquired. However, depending on their complexity, the creation of a suitable design is an elaborate task. Although approaches exist that derive such a design, they suffer from low flexibility and usability, which is why most concentration gradient generators are still mainly designed manually thus far—a time-consuming and error-prone task. To tackle this problem, we propose a method for the automatic design of tree-shaped concentration gradient generators and introduce a publicly available online tool that automatically generates a suitable design by adjusting the hydrodynamic resistances within the network. Moreover, the proposed tool is not only able to generate designs complying with user-defined requirements, such as mixing ratios, flow rates, and channel widths but also works for any number of outlets. Simulations using a Computational Fluid Dynamics (CFD) tool as well as evaluations on fabricated designs confirm the quality of the results obtained by the proposed tool.
Nanostructured surfaces and nanoparticles are already widely employed in many different fields of research, and there is an ever-growing demand for reliable, reproducible and scalable nanofabrication methods. This is especially valid for multifunctional nanomaterials with physical properties that are tailored for specific applications. Here, we report on the fabrication of two types of nanomaterials. Specifically, we present surfaces comprising a highly uniform array of elliptical pillars as well as nanoparticles with the shape of nanopockets, possessing nano-cavities. The structures are fabricated by nanoimprint lithography, physical and wet-chemical etching and sputter deposition of thin films of various materials to achieve a multifunctional nanomaterial with defined optical and magnetic properties. We show that the nanopockets can be transferred to solution, yielding a nanoparticle dispersion. All fabrication steps are carefully characterized by microscopic and optical methods. Additionally, we show optical simulation results that are in good agreement with the experimentally obtained data. Thus, this versatile method allows to fabricate nanomaterials with specific tailor-made physical properties that can be designed by modelling prior to the actual fabrication process. Finally, we discuss possible application areas of these nanomaterials, which range from biology and medicine to electronics, photovoltaics and photocatalysis.
Nanoimprinting is a well-established replication technology for optical elements, with the capability to replicate highly complex micro- and nanostructures. One of the main challenges, however, is the generation of the master structures necessary for stamp fabrication. We used UV-based Nanoimprint Lithography to prepare hierarchical master structures. To realize structures with two different length scales, conventional nanoimprinting of larger structures and conformal reversal nanoimprinting to print smaller structures on top of the larger structures was performed. Liquid transfer imprint lithography proved to be well suited for this purpose. We used the sample prepared in such a way as a master for further nanoimprinting, where the hierarchical structures can then be imprinted in one single nanoimprinting step. As an example, we presented a diffusor structure with a diffraction-grating structure on top.
In this work, we investigate the behaviour of liquids in symmetric open microgrooves and give a criterion for spontaneous capillary flow. To that end, we use a two-dimensional model and analyse the liquid morphologies minimizing the Gibbs energy of the system. We find that the condition of a flat liquid surface, which was hitherto assumed, is indeed the solution minimizing the Gibbs energy, so that it can safely be accepted to investigate whether open capillaries fill spontaneously. Furthermore, we find a condition for spontaneous capillary flow that depends on the cross-section of the channel alone. We use the findings to derive the critical contact angle, below which spontaneous capillary flow happens, for three examples including V-grooves, Gaussian grooves, and lenticular grooves.
By using lateral extensional modes of piezoelectric plate transducers for the actuation of a microfluidic chip containing a structured microchannel, we achieved two-dimensional single-node acoustofluidic particle trapping inside a circular cavity as well as two-dimensional multi-node trapping in straight channels. In order to manipulate the particles in two lateral dimensions, we used two separate PZT transducers attached to the bottom of the microfluidic chip, where each is responsible for generating a standing acoustic wave in a specific direction inside the microfluidic structures of the chip. We demonstrate trapping of polymer microspheres and trapping of human embryonic kidney cells with a performance that can compete with current bulk acoustic methods which typically employ transducer thickness modes. The acoustic energy density of the involved acoustic fields reaches several hundred (430) Joules per cubic meter, leading to trapping times of tenths of a second (150 ms) and nanonewton trapping forces (0.42-1.7 nN). The relatively low, sub-megahertz resonance frequency of the utilized lateral transducer mode in the cavity trapping, results in a large, millimeter long wavelength of the acoustic wave inside the fluid, which enables collection of comparably large volumina of multiple tens of nanoliter containing several thousands of particles or cells. Consequently, with the large volumes involved, it appears feasible to trap bigger objects, like multicellular organisms or organoids with approximately one millimeter in size.
A modular microfluidic system can be used to quickly set up an individually adaptable microfluidic network by linking and delinking different functional building blocks. We present a convenient and reliable connection technology, which is based on magnets and casted O-ring-like structures leading to a sealed connection without the need of additional sealing materials. Based on an improved, previously presented fabrication technology, modular microfluidic polydimethylsiloxane (PDMS) blocks using a polyurethane (PU) mold, 3D printed acrylonitrile butadiene styrene (ABS) channel structures and a magnetic connection system in combination with a casted O-ring link, featuring various integration technologies have now been designed and experimentally evaluated. In particular, this paper will address the realization of directional valves, reciprocating pumps, finger pumps, directly-cast check- and Tesla-valves, fluidic flow sensors, fluidic mixers, commercial valves, and various sensors. By using different measurement setups, the feasibility of these devices is demonstrated. Moreover, limitations and issues encountered during fabrication as well as future work are discussed.