Anna Król

Prof. Anna Król


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 August 2020 in Energies
Verified
Journal Article
Open access
PDF file
ZGZbigniew Giergiczny
Zbigniew Giergiczny
AKAnna Król
Anna Król
MTMichał Tałaj
Michał Tałaj
KWKarol Wandoch
Karol Wandoch
The broader use of cements with a higher content of the main non-clinker components in construction industry is one of the directions leading to the decarbonization in cement production. This contribution analyzes the properties of low-emission cements containing from 44% to 56% of Portland clinker in their composition and indicates the possibilities of wider use in the construction. The obtained results confirmed that following the appropriate technological regimes, low-emission cements can be implemented into the production of concrete exposed to carbonation-induced corrosion (exposure class XC4 according to EN 206), frost-resistant concrete (exposure class XF4 according to EN 206), self-compacting concrete (SCC) and high-performance concrete (HPC). An analysis of the level of CO2 emissions in the production of specific types of concrete using low-emission cements was also made.

14 May 2020 in Materials
Verified
Journal Article
Open access
PDF file
AKAnna Król
Anna Król
ZGZbigniew Giergiczny
Zbigniew Giergiczny
JKJustyna Kuterasińska-Warwas
Justyna Kuterasińska-Warwas
The paper presents the composition and properties of low-emission ternary cements: Portland multicomponent cement CEM II/C-M and multicomponent cement CEM VI. In the ternary cements, Portland clinker was replaced at the levels of 40% and 55% with a mixture of the main components such as limestone (LL), granulated blast furnace slag (S) and siliceous fly ash (V). Portland multicomponent cements CEM II/C-M and CEM VI are low-emission binders with CO2 emissions ranging from 340 (CEM VI) kg to 453 (CEM II/C-M) kg per Mg of cement. The results obtained indicate the possibility of a wider use of ground limestone (LL) in cement composition. This is important in the case of limited market availability of fly ash and granulated blast furnace slag. The tests conducted on concrete have shown that the necessary condition for obtaining a high strength class and durability of concrete from CEM II/C-M and CEM VI ternary cements is low water–cement ratio. Durability characteristics of concrete (carbonation susceptibility, chloride ion permeation, frost resistance) made of CEM II/C-M and CEM VI cements were determined after 90 days of hardening. This period of curing reflects the performance properties of the concrete in a more effective way.

4 February 2022 in Energies
Verified
Journal Article
Open access
PDF file
EJElżbieta Janowska-Renkas
Elżbieta Janowska-Renkas
AKAnna Król
Anna Król
SPSławomir Pochwała
Sławomir Pochwała
DPDawid Pałubski
Dawid Pałubski
Małgorzata Patrycja AdamskaMałgorzata Patrycja Adamska
Małgorzata Patrycja Adamska
IKIgor Klementowski
Igor Klementowski
The motivation for research to help address climate change is a continuous process of searching for eco-friendly materials in the building industry, which will allow minimizing the negative impact of this sector on the environment. The main objective of the paper is to assess the properties of a natural resource such as straw as an eco-friendly material in various variants for use in low-energy demand construction. The research results will fill the knowledge gap in the field of numerical analyses of the energy demand of straw material buildings based on the results of the conducted laboratory tests. A test of a heat transfer coefficient was conducted with different orientation of straw stalks. Then, samples were subject to a fire resistance test to determine material behavior at 1000 °C. During the fire resistance test, the clay-based plaster was ‘burnt out’, which hardened its structure, effectively preventing flames from reaching the insulation layers in the form of straw stalks. As a result of shrinkage (no plaster mesh), the plaster cracked and turned brick-red in color. The insulation layer of straw under the plaster was charred to a depth of 3.0 mm due to the high temperature. However, when the torch was turned off, no fire spread was observed in any layer of the sample. The 3D models of the buildings were created for different eco-friendly materials applied to make external walls. The results of numerical simulation allowed determining the amount of final energy needed to heat the designed building at the level of 26.38 (kWh/m2·year). Conclusions of the above-mentioned tests indicate very good thermal insulating properties determined using the lambda coefficient of 0.069 (W/m·K) and the possible application of straw bales as an alternative for conventional construction. Research has proven that it is possible to construct a building with low energy requirements using natural, easily available waste and completely biodegradable material.

17 April 2020 in Materials
Verified
Journal Article
Open access
PDF file
AKAnna Król
Anna Król
The use of mineral additives from the power and metallurgy industries in the production of building materials still raises questions about the ecological safety of such materials. These questions are particularly associated with the release of heavy metals. The article presents research related to the leaching of chromium from concretes made of Portland cement CEM I and slag cement CEM III/B (containing 75% of granulated blast furnace slag). Concrete was evaluated for leaching mechanisms that may appear during tank test over the long term (64 days). It has been presented that the dominating process associated with the leaching of chromium from both types of concrete is surface wash-off. Between the 9th and 64th day of the test, leaching of Portland cement concrete can be diffusion controlled. It has been proven that the participation of slag in the composition of concrete does not affect the level of leaching of chromium into the environment from concrete.

10 July 2023 in Stochastic Environmental Research and Risk Assessment
Verified
Journal Article
Open access
PDF file
AKAnna Król
Anna Król
MJMagdalena Jurczyk-Bunkowska
Magdalena Jurczyk-Bunkowska
KMKamila Mizerna
Kamila Mizerna
The paper presents a specific model used to assess and select the method of heavy metal leaching from waste materials. A recommendation for the rational selection of the leaching method was made, taking into account the crucial parameters affecting the leaching process derived from the authors' research experience. The assessment models were supplemented with characteristics relating to the cost and time required to perform the tests. An approach was developed that links the weights of the assessment criteria with the degree of environmental risk from a particular heavy metal and waste type. Using multiple-criteria decision analysis, four models were developed for the assessment and selection of a test method for the leaching of heavy metals from waste. The difference is in the way the weights of the assessment criteria depend on the potential threat of the waste to the environment. A key element of the proposed approach is assigning the weights of the criterion to the toxicity of the heavy metal, the type of waste, and their management method. The results obtained prove that the current practice of only employing the batch leaching test is inappropriate. The choice of method should be justified in terms of environmental safety as well as time- and cost-effectiveness. The results of the paper show that the proposed model can be used in practice and be a recommendation for choosing the method of leaching heavy metals from waste and their further treatment, following the principles of sustainable waste management.

23 April 2025 in Materials
Verified
Journal Article
Open access
PDF file
EJElżbieta Janowska-Renkas
Elżbieta Janowska-Renkas
AKAnna Król
Anna Król
IKIgor Klementowski
Igor Klementowski
MSMichał Sokolski
Michał Sokolski
In this work, to enhance the compressive strength and evaluate the fire resistance of hemp concrete, we incorporated mineral additives such as FBC fly ash and metakaolin. This paper investigates the thermal conductivity, compressive strength, flammability, and fire resistance of hempcrete and the influence of mineral additives in the form of fly ash from fluidized bed combustion (FBC) and metakaolin on these properties. A fly ash content of 20% by weight of the binder resulted in an increase of 26% in compressive strength and about 6% in thermal conductivity compared to hemp concrete without mineral additives. The use of metakaolin in the amount of 15% by weight of the binder resulted in a 21% increase in compressive strength values with an increase in the thermal conductivity coefficient of only 0.5%. Flammability tests by direct application of a gas torch flame to the specimen surface proved the lack of flammability and spontaneous fire extinguishing ability of hempcrete. In turn, fire resistance tests showed much higher resistance to high temperatures for hempcrete modified with metakaolin, where the recorded mass loss during a 15 min test at 500 °C was ca. 58% less than in hempcrete without mineral additives, and when FBC fly ash was used, the mass loss was ca. 37% less. The obtained results are satisfactory in terms of the physico-mechanical properties of hempcrete. They also enable the replacement of traditional construction materials with waste-derived materials from other sectors of the economy, which, in the long term, will contribute to the development of green construction and support the principles of the circular economy.