Cheng Cheng

Dr. Cheng Cheng


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 August 2022 in Polymers
Verified
Journal Article
Open access
PDF file
MCMeng Cai
Meng Cai
XZXun Zhao
Xun Zhao
XHXuanzhen Han
Xuanzhen Han
PDPeng Du
Peng Du
YSYi Su
Yi Su
CCCheng Cheng
Cheng Cheng
Lignin is abundant in nature. The use of lignin in the asphalt pavement industry can improve pavement performance while effectively optimizing pavement construction costs. The purpose of this paper is to study the effect of lignin on the anti-aging properties of asphalt. Commercial lignin was selected to prepare a lignin-modified asphalt binder. The properties of lignin-modified asphalt were studied by rheological experiments. The high-temperature rheological properties of two kinds of base asphalt and modified asphalt samples with different contents of lignin under three conditions of original, rolling thin film oven (RTFO) aging, and pressure aging vessel (PAV) were tested and analyzed with temperature sweep, frequency sweep, and multiple stress creep recovery (MSCR) tests. By comparing the variation laws of evaluation indicators, such as complex shear modulus G*, phase angle δ, anti-aging index, cumulative strain, and viscous component Gv, we found that lignin could effectively improve the high-temperature stability of base asphalt, but it had a negative impact on the compatibility issues of base asphalt. Meanwhile, lignin played a filling role in the base asphalt, and the increase in viscosity was the fundamental reason for improving the high-temperature stability of the base asphalt. The research results indicated that lignin could effectively improve the anti-aging performance of asphalt and play a positive role in prolonging the service life of pavement.

1 January 2020 in Journal of Renewable Materials
Verified
Journal Article
Open access
PDF file
CCCheng Cheng
Cheng Cheng
WSWeiwei Sun
Weiwei Sun
BHBo Hu
Bo Hu
GTGuixiang Tao
Guixiang Tao
CPChao Peng
Chao Peng
SWShujuan Wu
Shujuan Wu
The use of lignin, which is a by-product of the pulp and paper industry, in the development of asphalt binders would contribute to waste reduction, providing environmental, economic, and social benefits. In this study, samples of lignin-modified asphalt binder samples with different content of lignin (3%, 6%, 9%, 12%, and 15%) and unmodified asphalt (control) were tested using Fourier transform infrared spectroscopy (FTIR), dynamic shear rheometer (DSR), and thermogravimetry. The mechanism and effectiveness of lignin in improving the thermal stability of asphalt at high temperatures were analyzed. The FTIR analysis shows that no new characteristic absorption peak is seen in the infrared spectral of the lignin-modified asphalt binder samples, and some bands characteristic of lignin-related peaks gradually increased with the increase of lignin content. This suggests that the modification of lignin-modified asphalt binder samples was due to physical blending rather than chemical modification. The increase of lignin content in the lignin-modified asphalt samples increases the complex shear modulus G* of the samples and decreases the phase angles of the samples. Similarly, the anti-rutting performance (G*/sinδ)of the samples improves with the increase in lignin content, but this is not significant after any addition of lignin that exceeds 12% of asphalt mass. Thermal characterizations show that the thermal decomposition rate of lignin is lower, and its residual amount is higher compared to that of asphalt, which is a major reason for the improved stability of lignin-modified asphalt binders at high temperatures. The effect of lignin on the thermal stability of asphalt is dependent on both lignin content and temperature. It has a positive effect on the thermal stability of asphalt at high temperatures within the range of asphalt service temperature (25°C–200°C). Additionally, from the pyrolysis viewpoint, it was explained that excessive lignin addition is not beneficial to the thermal stability of asphalt at high temperatures, which is consistent with the DSR test result conducted high temperatures.

28 February 2023 in Buildings
Verified
Journal Article
Open access
PDF file
MCMeng Cai
Meng Cai
CPChao Peng
Chao Peng
CCCheng Cheng
Cheng Cheng
Lignin is a major waste product of biofuel and paper industries that can be used as a modifier to improve the relevant properties of asphalt. To investigate the effect of lignin and formic acid lignin wood incorporations into asphalt and the effect on asphalt binder that was unaged and aged for 85 min, 5 h, and 10 h, a series of tests were conducted, including high- and low-temperature rheological tests by a dynamic shear rheometer (DSR), followed by Fourier transform infrared spectroscopy (FTIR) tests, and finally by gel permeation chromatography (GPC). The test results show that the additions of lignin and formic acid lignin could improve the high-temperature performance and fatigue capacity of asphalt. In addition, at the glass-transition temperature, it was observed that the additions of lignin and formic acid lignin into asphalt can effectively improve cracking at low temperatures; however, the quantity of lignin and formic acid lignin should be controlled. Fourier transform infrared spectroscopy tests showed that the purity of lignin treated with formic acid decreased, and degradation and formylation of the same formic acid-treated lignin occurred, indicating that the lignin underwent chemical changes following acid treatment. The analysis of the results by gel permeation chromatography (GPC) showed that, with aging, the average molecular weight (Mw) of lignin-modified asphalt decreased. The reason was that lignin and formic acid lignin were cracked during aging, which reduced their molecular weights.

23 May 2024 in Buildings
Verified
Journal Article
Open access
PDF file
JMJian Ma
Jian Ma
SZShaopeng Zheng
Shaopeng Zheng
ZZZilong Zhang
Zilong Zhang
ZSZHENG Shaopeng
ZHENG Shaopeng
DGDan Geng
Dan Geng
CCCheng Cheng
Cheng Cheng
This paper conducts an in-depth study and evaluation of pedestrian paths, with a particular focus on the anti-slip performance and walking comfort of wooden chip pedestrian walkways. Through controlled experiments, a comparative analysis was performed between wooden chip pedestrian walkways and ordinary paved brick walkways. The experimental results indicate that under dry conditions, the anti-slip performance of various road surfaces is good. However, in wet environments, the anti-slip performance of paved brick roads deteriorates significantly. In contrast, wooden chip pedestrian walkways, especially those mixed with asphalt and wood chips, exhibit excellent anti-slip properties and comfort. Additionally, the study reveals that the comfort of wooden chip pedestrian walkways is significantly better than that of paved brick walkways, and the comfort of asphalt materials is slightly better than emulsified asphalt. It is worth mentioning that fine wood chips provide less comfort than coarse wood chips. Although reducing the thickness can enhance comfort, considering the service life of the road, a thickness of 4–6 cm is most suitable. Finally, asphalt and wooden chip mixtures with coarse wood chips possess good water permeability, making them suitable for permeable drainage pavement designs, effectively reducing road surface water accumulation.

14 August 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
XTxiao Tao
xiao Tao
KYKai Yang Kai Yang
Kai Yang Kai Yang
MCMeng Cai
Meng Cai
JLJianwei Luo
Jianwei Luo
XLXiaolong Li
Xiaolong Li
CCCheng Cheng
Cheng Cheng
The production process of the traditional paper making process produces a large amount of waste water, known as paper black liquor. It is needed to explore new ways of reusing this waste and replacing part of the base bitumen to reduce the consumption of non-renewable resources, such as petroleum, thus obtaining better environmental, economic, and social benefits. This paper analyses the feasibility of using paper black liquor, which contains a large amount of lignin, as a modifier for bitumen in the paper industry. Samples of modified bitumen were prepared with 15%, 30%, and 45% of the base bitumen replaced by paper black liquor, and a control group of base bitumen was prepared for testing. The samples were subjected to an 85 min short-term ageing test, FTIR scanning test, thermogravimetric test, frequency scanning test, MSCR test, and LAS test. The analysis of the FTIR and thermogravimetric tests showed that the paper black liquor was mainly composed of lignin and some cellulose, and contained a small amount of salts with Na ions; based on the results of the frequency scan, the compatibility analysis of the vGP curve showed that the modified bitumen was more compatible in the high-temperature range after short-term ageing, thus inferring that the water content of the concentrate had an influence on the compatibility, making it necessary to further investigate different optimum water contents to achieve the best performance and benefit. The incorporation of paper black liquor improved the rutting resistance and fatigue resistance of the modified bitumen, and also gave the paper-black-liquor-modified bitumen a better ageing resistance than the base bitumen. While demonstrating the feasibility of using paper black liquor as an bitumen modifier, this study also helps to provide a basis for theoretical applications of biomass materials in the field of road engineering.

17 October 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
SFSilin Fan
Silin Fan
ZSZHENG Shaopeng
ZHENG Shaopeng
JMJian Ma
Jian Ma
LCLiangliang Chen
Liangliang Chen
XLXiao Li
Xiao Li
CCCheng Cheng
Cheng Cheng
This study systematically investigated the formulation optimization, performance evaluation, and practical application of epoxy-based composite materials for colored asphalt pavement. By conducting comprehensive experiments, we optimized the composition of epoxy-based composites, verifying their excellent bonding performance, good heat resistance, and UV aging resistance under various temperature conditions. The key optimized component ratios were determined as a 1:1 blend of Type I and Type II epoxy resins, 30 phr of curing agent, 10 phr of toughening agent, 5 phr of diluent, 10% filler, 12% flame retardant, and 10% pigment. At the recommended dosage of 2.0 kg/m2 of epoxy binder, the composite structure exhibited the best reinforcement effect, improving low-temperature performance significantly. Compared to ordinary asphalt mixtures, the colored pavement composite structure showed superior mechanical strength, deformation capacity, high-temperature stability (dynamic stability approximately three times higher), and water stability (TSR values up to 95.5%). Furthermore, its fatigue life decay rate was significantly lower, with fatigue limit loading frequencies more than three times those of ordinary asphalt mixtures, demonstrating excellent fatigue resistance. This study provides strong technical support and a theoretical basis for the development and practical application of colored asphalt pavement.