ZHENG Shaopeng

Dr. ZHENG Shaopeng


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2023 in Buildings
Verified
Journal Article
Open access
PDF file
ZCZhihao Cheng
Zhihao Cheng
ZSZHENG Shaopeng
ZHENG Shaopeng
NLNaixing Liang
Naixing Liang
LXLi Xiao
Li Xiao
LLLibin Li
Libin Li
The study aims to analyze the influence of complex service factors on ravelling resistance performance for large-void asphalt pavements by carrying out tests on environmental and vehicle factors, conducting ultraviolet aging, freeze–thaw cycles, as well as vehicle speed simulated tests with the Rotating Surface Abrasion Test, vehicle tests, and traffic volume tests, and by making a correlation analysis between the Cantabro Abrasion test and Rotating Surface Abrasion Test. The result shows that environmental factors significantly affect the ravelling resistance performance of drainage asphalt pavements. With the increase in the times of UV aging and freeze–thaw cycles, the ravelling loss rate of asphalt specimens shows a tendency to increase, and the combined test of UV aging and freeze–thaw cycles aggravated the ravelling damage of asphalt specimens. Meanwhile, vehicle factors have a significant attenuation effect on the ravelling resistance performance of drainage asphalt pavements. With the increase in the speed, pressure, and times of the Rotating Surface Abrasion, the ravelling loss rate of asphalt specimens shows a steady tendency to increase. Furthermore, there exists a good correlation between the Rotating Surface Abrasion speed, pressure, times, and the ravelling loss rate. Finally, the two test results of the Cantabro Abrasion test and Rotating Surface Abrasion test are consistent in their changes during single/composite factor analysis, confirming the feasibility of using the Rotating Surface Abrasion test index to characterize the change in the ravelling resistance performance of drainage asphalt pavements.

19 September 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
ZCZhihao Cheng
Zhihao Cheng
LXLi Xiao
Li Xiao
QYQilin Yang
Qilin Yang
NLNaixing Liang
Naixing Liang
LCLiangliang Chen
Liangliang Chen
Dawei WangDawei Wang
Dawei Wang
Porous asphalt pavements have a skeletal structure with a large number of interconnecting pores, which can improve drainage, ensure traffic safety, and reduce tire noise. However, it can weaken the mechanical properties of the pavement. One of the key factors affecting the performance of porous asphalt pavements is the quality of compaction, the assessment of which is difficult to accurately quantify. Therefore, Superpave gyratory compaction (SGC) and skeleton penetration tests of porous asphalt mixtures were carried out using three engineering-differentiated gradations in this paper to investigate the gyratory compaction characteristics and the skeleton contact state during penetration. The results show that obvious stages with the increase in number of cycles can be observed during the compaction process. All gradations can achieve the maximum porosity requirements within a reasonable number of compaction cycles, while only the medium and fine gradations can approximately meet the minimum porosity requirements. The coarse gradation takes too long to finish compaction and is almost impossible to meet the minimum porosity. The optimum match between the void ratio of the design gradation and the skeleton contact state can be verified using the VCA ratio and void ratio curves. This is a new method to determine the corresponding target compaction number that can ensure better accuracy and ease of engineering application. Moreover, medium-graded mixtures with better skeletal embedding exhibit greater skeletal strength than coarse-graded aggregates, which provide theoretical support for the establishment of material grade optimization methods.

23 May 2024 in Buildings
Verified
Journal Article
Open access
PDF file
JMJian Ma
Jian Ma
SZShaopeng Zheng
Shaopeng Zheng
ZZZilong Zhang
Zilong Zhang
ZSZHENG Shaopeng
ZHENG Shaopeng
DGDan Geng
Dan Geng
CCCheng Cheng
Cheng Cheng
This paper conducts an in-depth study and evaluation of pedestrian paths, with a particular focus on the anti-slip performance and walking comfort of wooden chip pedestrian walkways. Through controlled experiments, a comparative analysis was performed between wooden chip pedestrian walkways and ordinary paved brick walkways. The experimental results indicate that under dry conditions, the anti-slip performance of various road surfaces is good. However, in wet environments, the anti-slip performance of paved brick roads deteriorates significantly. In contrast, wooden chip pedestrian walkways, especially those mixed with asphalt and wood chips, exhibit excellent anti-slip properties and comfort. Additionally, the study reveals that the comfort of wooden chip pedestrian walkways is significantly better than that of paved brick walkways, and the comfort of asphalt materials is slightly better than emulsified asphalt. It is worth mentioning that fine wood chips provide less comfort than coarse wood chips. Although reducing the thickness can enhance comfort, considering the service life of the road, a thickness of 4–6 cm is most suitable. Finally, asphalt and wooden chip mixtures with coarse wood chips possess good water permeability, making them suitable for permeable drainage pavement designs, effectively reducing road surface water accumulation.

12 August 2025 in Infrastructures
Verified
Journal Article
Open access
PDF file
ZSZHENG Shaopeng
ZHENG Shaopeng
ZZZilong Zhang
Zilong Zhang
PHPeiwen Hao
Peiwen Hao
JMJian Ma
Jian Ma
LCLiangliang Chen
Liangliang Chen
This study investigates the evolution laws and prediction models of anti-skid and wear-resistant performance for asphalt pavements during the operation period. Using a combination of indoor accelerated wear tests and field detection, mixed specimens are prepared with SBS modified asphalt, limestone, and basalt aggregates. Through accelerated wear tests of different durations, the structural depth and friction coefficient are measured. Combined with the field data from the G56 K2319 section of the Hangrui Expressway, the decay laws of anti-skid performance are analyzed, and prediction models are established. The results show that the anti-skid performance of basalt mixtures is superior to that of limestone. The deepened structure technology significantly enhances the performance of basalt but has a negative impact on the pendulum value of limestone. The influence degrees of wear duration, aggregate type, and deepened structure state on structural depth and pendulum value vary. The initial structural depth of basalt mixtures (0.85 mm) is 11.8% higher than that of limestone (0.76 mm). The longitudinal pendulum value of basalt (44) is 10% higher than that of limestone (40), while the transverse pendulum value of limestone (50) is 4.2% higher than that of basalt (48). After 21 h of wear, the structural depth of basalt (0.68 mm) is 4.6% higher than that of limestone (0.65 mm), with a decay rate 23.6% lower. The pendulum value of basalt remains above 50, while limestone’s longitudinal pendulum value drops to 36 (10% lower than its initial value), even below the unmodified state. The influence order for structural depth is deepened structure state > wear duration > aggregate type, and for lateral pendulum value, it is wear duration > deepened structure state > aggregate type. There is a significant linear relationship between structural depth/pendulum value and wear duration, and the prediction models are reliable. The indoor accelerated wear of 44.5 h is equivalent to the field operation wear of 3 years. The research findings provide a theoretical basis for the evaluation of anti-skid performance, maintenance decision-making, and material optimization of asphalt pavements.

17 October 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
SFSilin Fan
Silin Fan
ZSZHENG Shaopeng
ZHENG Shaopeng
JMJian Ma
Jian Ma
LCLiangliang Chen
Liangliang Chen
XLXiao Li
Xiao Li
CCCheng Cheng
Cheng Cheng
This study systematically investigated the formulation optimization, performance evaluation, and practical application of epoxy-based composite materials for colored asphalt pavement. By conducting comprehensive experiments, we optimized the composition of epoxy-based composites, verifying their excellent bonding performance, good heat resistance, and UV aging resistance under various temperature conditions. The key optimized component ratios were determined as a 1:1 blend of Type I and Type II epoxy resins, 30 phr of curing agent, 10 phr of toughening agent, 5 phr of diluent, 10% filler, 12% flame retardant, and 10% pigment. At the recommended dosage of 2.0 kg/m2 of epoxy binder, the composite structure exhibited the best reinforcement effect, improving low-temperature performance significantly. Compared to ordinary asphalt mixtures, the colored pavement composite structure showed superior mechanical strength, deformation capacity, high-temperature stability (dynamic stability approximately three times higher), and water stability (TSR values up to 95.5%). Furthermore, its fatigue life decay rate was significantly lower, with fatigue limit loading frequencies more than three times those of ordinary asphalt mixtures, demonstrating excellent fatigue resistance. This study provides strong technical support and a theoretical basis for the development and practical application of colored asphalt pavement.

19 September 2025 in Coatings
Verified
Journal Article
Open access
PDF file
TSTao Shen
Tao Shen
ZSZHENG Shaopeng
ZHENG Shaopeng
XLXiang Liu
Xiang Liu
XLXiaolong Li
Xiaolong Li
JJJingpeng JIA
Jingpeng JIA
TSTao Shen
Tao Shen
Microorganisms present in asphalt pavement service environments can alter the composition of asphalt through metabolic activities, thereby affecting its rheological properties. To investigate this influence and compare performance variations across asphalt types, two asphalt-degrading bacterial strains were isolated from in-service pavements. Following 16S rRNA gene sequencing and phylogenetic analysis, the strains were identified as Pseudomonas putida and a putative novel species within the Citrobacter genus. Using a custom-designed thin-film inoculation system, the performance evolution of base asphalt and styrene-butadiene-styrene (SBS) modified asphalt was systematically evaluated after microbial activity periods of 5, 10, and 15 days. Conventional property tests and multi-temperature rheological analyses (temperature sweep, multiple stress creep recovery test, linear amplitude sweep, 4 mm DSR) were conducted. Results demonstrated that microbial action reduced penetration, elevated softening point, and decreased ductility in both asphalt types, with more pronounced changes observed in base asphalt. High-temperature rheological parameters (G*/sinδ), recovery rate, and non-recoverable creep compliance indicated compromised resistance to permanent deformation. SBS-modified asphalt substantially mitigated these detrimental effects. Fatigue life of base asphalt decreased overall with periodic fluctuations, whereas SBS-modified asphalt exhibited superior fatigue stability: after an initial decline at 5 days, performance recovered and stabilized between 10 and 15 days. Low-temperature performance showed slight improvement in base asphalt, while SBS-modified asphalt demonstrated significant enhancement during later activity stages.