Shaopeng Zheng

Mr. Shaopeng Zheng


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 May 2024 in Buildings
Verified
Journal Article
Open access
PDF file
JMJian Ma
Jian Ma
SZShaopeng Zheng
Shaopeng Zheng
ZZZilong Zhang
Zilong Zhang
ZSZHENG Shaopeng
ZHENG Shaopeng
DGDan Geng
Dan Geng
CCCheng Cheng
Cheng Cheng
This paper conducts an in-depth study and evaluation of pedestrian paths, with a particular focus on the anti-slip performance and walking comfort of wooden chip pedestrian walkways. Through controlled experiments, a comparative analysis was performed between wooden chip pedestrian walkways and ordinary paved brick walkways. The experimental results indicate that under dry conditions, the anti-slip performance of various road surfaces is good. However, in wet environments, the anti-slip performance of paved brick roads deteriorates significantly. In contrast, wooden chip pedestrian walkways, especially those mixed with asphalt and wood chips, exhibit excellent anti-slip properties and comfort. Additionally, the study reveals that the comfort of wooden chip pedestrian walkways is significantly better than that of paved brick walkways, and the comfort of asphalt materials is slightly better than emulsified asphalt. It is worth mentioning that fine wood chips provide less comfort than coarse wood chips. Although reducing the thickness can enhance comfort, considering the service life of the road, a thickness of 4–6 cm is most suitable. Finally, asphalt and wooden chip mixtures with coarse wood chips possess good water permeability, making them suitable for permeable drainage pavement designs, effectively reducing road surface water accumulation.

29 November 2023 in Coatings
Verified
Journal Article
Open access
PDF file
YYYezhen Yuan
Yezhen Yuan
ZHZhe He
Zhe He
KNKaimin Niu
Kaimin Niu
BTBo Tian
Bo Tian
LCLiangliang Chen
Liangliang Chen
GYGuoman Yu
Guoman Yu
This research aims to analyze the distribution and evolution of pores within the planar structure of cement-based materials. Utilizing digital imaging methods, a model for pore plane distribution was established, and the evolutionary patterns of both total pore numbers and varying pore sizes in cement-based materials were investigated. The research introduced an innovative experimental method for analyzing pore distribution within cement-based planar structures. Additionally, a hybrid method was proposed, combining automated image binarization thresholding with manual comparative analysis, thereby enhancing the feasibility of comparative research. Pores were categorized into four distinct sizes: tiny pores (5–200 μm), small pores (200–500 μm), medium pores (500–1000 μm), and large pores (>1000 μm). Areas with apertures <5 μm were classified as dense areas. The findings indicated that the overall number of pores in cement-based materials increased due to the influence of styrene butadiene latex additives. However, at a 15% dosage, the rate of pore formation reached an inflection point, confirming that various factors, such as styrene butadiene latex, air bubbles, and the cement-based material itself, collectively influenced pore formation. The research also demonstrated that styrene butadiene latex affected the four categorized pore sizes differently. Importantly, a higher latex dosage did not necessarily lead to a proportional increase in pore content. Pore content was influenced by multiple factors and exhibited different distribution patterns. The number of micropores, although relatively small, gradually increased with higher latex dosages, while small and medium pores generally showed an upward trend. At a 10% latex dosage, both small and medium pores reached a turning point in their rate of increase. Large pores also exhibited a general increase, peaking at a latex dosage of 10%. It was confirmed that both the total pore volume and the content of micropores were critical factors in determining the mechanical properties of cementitious materials. Higher porosity and micropore content generally weakened mechanical performance. However, at a small latex dosage, there was an improvement in flexural strength. When the latex dosage reached 15%, the total pore and micropore content declined, resulting in a balanced increase in flexural strength and a mitigated decline in compressive strength. This study offers valuable insights into the evolution of total pore volume and the content of pores of various sizes, providing a theoretical basis for the meticulous selection of additive types and dosages from a microscopic perspective.