Huijuan Zhao

Dr. Huijuan Zhao

orcid

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 August 2018 in npj Computational Materials
Verified
Journal Article
Open access
PDF file
YLYuhao Li
Yuhao Li
CYChuanbin Yu
Chuanbin Yu
YGYingye Gan
Yingye Gan
PJPeng Jiang
Peng Jiang
JYJunxi Yu
Junxi Yu
JLJiangyu Li
Jiangyu Li
Elasticity is a fundamental mechanical property of two-dimensional (2D) materials, and is critical for their application as well as for strain engineering. However, accurate measurement of the elastic modulus of 2D materials remains a challenge, and the conventional suspension method suffers from a number of drawbacks. In this work, we demonstrate a method to map the in-plane Young’s modulus of mono- and bi-layer MoS2 on a substrate with high spatial resolution. Bimodal atomic force microscopy is used to accurately map the effective spring constant between the microscope tip and sample, and a finite element method is developed to quantitatively account for the effect of substrate stiffness on deformation. Using these methods, the in-plane Young’s modulus of monolayer MoS2 can be decoupled from the substrate and determined as 265 ± 13 GPa, broadly consistent with previous reports though with substantially smaller uncertainty. It is also found that the elasticity of mono- and bi-layer MoS2 cannot be differentiated, which is confirmed by the first principles calculations. This method provides a convenient, robust and accurate means to map the in-plane Young’s modulus of 2D materials on a substrate.

1 April 2019 in Nanoscale
Verified
Journal Article
Closed access
PDF file
QLQiushi Liu
Qiushi Liu
SKSanggon Kim
Sanggon Kim
XMXuezhi Ma
Xuezhi Ma
NYNing Yu
Ning Yu
Yangzhi ZhuYangzhi Zhu
Yangzhi Zhu
MLMing Liu
Ming Liu
Chemically-synthesized single-crystalline silver nanowire (AgNW) probes can combine the scanning tunneling microscopy (STM) technique with tip-enhanced Raman scattering spectroscopy (TERS) for complementary morphological and chemical information with nanoscale spatial resolution. However, its performance has been limited by the blunt nanowire tip geometry, the insulating surfactant layer coating AgNW surfaces, and the thermal-induced mechanical vibrations. Here, we report a reproducible fabrication method for the preparation of sharp-tip AgNW-based TERS probes. By removing the polyvinylpyrrolidone (PVP) surfactant molecules from the AgNW surfaces for stable electrical conductivity and controlling the protruding length with μm-level accuracy for improved mechanical stability, we demonstrate atomic-resolution STM imaging with the sharp-tip AgNW probe. Furthermore, the sharp-tip AgNW has an excellent TER enhancement (∼1.1 × 106), which is about 66 folds of that achieved by regular AgNWs. Our experiments demonstrate that AgNWs with clean interfaces and the proper tip geometry can provide reliable and reproducible STM and TER characterizations, which remove the hurdles preventing the implementation of AgNW in STM-based near-field optical applications for a broad community.

25 October 2017 in Advanced Materials Interfaces
Verified
Journal Article
Open access
PDF file
QMQian Mao
Qian Mao
LYLei Yang
Lei Yang
XGXiumei Geng
Xiumei Geng
LCLiao Chen
Liao Chen
BSBedanga Sapkota
Bedanga Sapkota
HZHongli Zhu
Hongli Zhu
In nature, cellulose is a unique lightweight biopolymer with outstanding mechanical and optical properties that is readily available. Rigorous investigations have been conducted to use cellulose as an ingredient in the advanced functional composite design. In this work, a hybrid film composed of homogeneous cellulose nanocrystals (CNC) and high oxidation graphene oxide (GO) is obtained by sufficient blending and vacuum filtration. For the first time through the X‐ray diffraction (XRD) spectrum, the suppression of the originally ordered hydrophobic (200) facet of CNC is observed with increasing concentrations of GO. Further, the originally ordered hydrophilic (110)/(1‐10) facets of CNC remain intact. Through systematic molecular dynamics simulations of a set of simplified CNC–GO sandwich structures, the mechanism behind this hydrophilic/hydrophobic facets manipulation is revealed. The strain induced by the hydrogen bonding between the CNC hydroxyl groups and the oxidation types on GO is the dominant reason to cause the suppression of the hydrophobic facet of CNC in CNC–GO hybrid film. This strain induced mechanism provides an understanding for intrinsically manipulating cellulose–matrix interface and potentially engineering the cellulose based nanocomposite material properties for future advanced materials development.

4 November 2022 in Macromolecular Materials and Engineering
Verified
Journal Article
Open access
HZHuijuan Zhao
Huijuan Zhao
HDHuajun Duan
Huajun Duan
JZJunjun Zhang
Junjun Zhang
LCLu Chen
Lu Chen
CWChao Wan
Chao Wan
HMHuiru Ma
Huiru Ma
With the aim to reduce the influence of flammability and brittleness of epoxy resin (EP) on its applications, a phosphorus‐containing oligomer (BID) containing phosphophenanthrene group and flexible chain segment is designed and applied to methyltetrahydrophthalic anhydride (MeTHPA) curing EP systems. Compared with EP/MeTHPA, the glass transition temperature (Tg) declines after introducing BID. But the addition of BID endows EP/MeTHPA with good flame retardancy. When the dosage is only 19.2 wt.%, the limiting oxygen index (LOI) of EP/BID/MeTHPA increases by 77% to 36% (P content: 1.5 wt.%) compared with EP and reaches the vertical combustion (UL‐94) V‐0 rating. Cone calorimetry (CC) results reveal that PHRR and THR drop by 40% and 31%. The pyrolytic process and char residue data analysis show that BID plays flame‐retardant role in gas phase and condensed phase. In addition, impact and flexural and tensile strength improve by 84%, 19% and 54% individually, proving that BID holds a potential on enhancing mechanical performance of EP/MeTHPA.

1 February 2022 in Composites Part B: Engineering
Verified
Journal Article
Closed access
LWLiying Wei
Liying Wei
Nanping DengNanping Deng
Nanping Deng
HZHuijuan Zhao
Huijuan Zhao
JJJingge Ju
Jingge Ju
GWGang Wang
Gang Wang
BCBowen Cheng
Bowen Cheng

11 October 2004 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
JLJ. Lu
J. Lu
Bo ShenBo Shen
Bo Shen
Ning TangNing Tang
Ning Tang
DCD. J. Chen
D. J. Chen
HZHuijuan Zhao
Huijuan Zhao
YAY. Arakawa
Y. Arakawa
Weak anti-localization of the two-dimensional electron gas (2DEG) in a modulation-doped Al0.22Ga0.78N∕GaN single heterostructure has been investigated through magnetoresistance measurements at low temperatures. The elastic scattering time τe , dephasing time τϕ and spin-orbit scattering time τso at various temperatures are obtained. When the second subband in the triangular quantum well at the heterointerface is occupied by the 2DEG, the weak anti-localization is observed clearly, which is thought to be due to the strong spin-orbit effect induced by the intersubband scattering. The spin-orbit effect and the intersubband scattering become stronger with increasing temperature.