The construction industry’s high energy consumption and carbon emissions significantly burden the ecological environment. Thus, it is necessary to study measures and strategies for emissions reduction during construction for an improved, safe and sustainable environment. Using the life-cycle assessment method, this study aims to investigate construction-building outcomes and their carbon footprint during the construction delivery stage. This work used a compiled database of carbon-emission factors per unit for concrete and mortar with different densities and 16 building-project case studies in Fujian Province to verify the empirical findings. The results show that general civil engineering works produce more carbon emissions than decoration engineering. Furthermore, cement’s average proportion of carbon emissions relative to total carbon emissions is the largest at 30.26%. Our findings also show a strong linear relationship between the total carbon emissions, eaves height, project cost, and building area during the building construction. The findings in this paper promote the conversion of buildings from high-energy consumption to multi-carbon reduction. The concept of this research contributes to the existing knowledge by proposing a carbon-footprint calculation method and establishing the trend of carbon emissions in building construction.
Sponge cities provide broad hydrological functions to alleviate urban flooding and other water-related problems in China. Conventional impervious paving cannot meet contemporary sustainable city goals. The permeable paving technology offers primary benefits such as increasing stormwater infiltration, drainage, purification, groundwater recharge, and microclimatic amelioration. Few studies have evaluated the embracive range of benefits and the social functions holistically. This study aimed to develop a comprehensive benefit evaluation system to cover a broad range of indicators. Nineteen indicators were selected based on the literature review, field studies, and research experience. Organized in a three-tiered hierarchical structure, they were divided into environmental, economic, and social benefits. A grey intuitionistic fuzzy comprehensive evaluation model was built by combining intuitionistic fuzzy analysis with a grey comprehensive evaluation. The computational tools could determine the differential weights of indicators and benefit scores. Taking an example of a permeable pavement project in Quanzhou City, the comprehensive benefits were assessed and validated using our evaluation model. The results show that (1) the comprehensive benefits of the project met the economic feasibility criteria with advantages over conventional paving; (2) the environmental benefits were prominently expressed; (3) the social benefits were assessed and confirmed. The results verified the feasibility and applicability of the quantitative-qualitative model. The method could permit the integrated and systematic benefit assessment of permeable paving designs. It also provides guidance and reference to evaluate the performance of permeable pavements and their comprehensive range of benefits. The findings could reference choosing and refining designs, optimizing the benefits, and promoting a science-oriented development of permeable paving.
Construction solid waste and agricultural waste, as renewable resources, have gained increasing attention recently. This research aims to explore the mechanical and thermal properties of recycled-straw insulating concrete commonly made with construction waste and straw in northern Fujian, which can provide useful suggestions for the practical use of recycled-straw insulating concrete. The effects of recycled coarse aggregate, fly ash, and straw on the mechanical and thermal properties of recycled-straw insulating concrete were investigated by orthogonal tests. The results of the orthogonal tests were optimized by the total efficacy coefficient method to obtain the optimal mix ratio of recycled-straw insulating concrete. Combined with the finite element analysis software ANSYS Workbench, the heat transfer performance of the recycled-straw insulating concrete walls was analyzed to simulate the insulation performance of the walls. The compressive strength of the recycled-straw insulating concrete with the optimal ratio was found to be 30.93 MPa, and the thermal conductivity was 0.5051 W/(m·K). The steady-state thermal analysis of the recycled-straw insulating concrete wall and the plain concrete wall was carried out by finite element software, and the simulation results showed that the insulation performance of the recycled-straw insulating concrete walls was improved by 145% compared with the plain concrete wall. These results indicate that the recycled-straw insulating concrete wall has better thermal insulation performance and can be applied to building envelopes to save heating costs in winter and reduce carbon dioxide emissions, which has significant economic and environmental significance for areas with low outdoor temperatures in winter and long heating periods.
Construction and agricultural waste recycling have gained more and more attention recently as renewable resources. Straw and construction waste, both of which are widespread in northern Fujian, were investigated in this research. The orthogonal test was used to investigate the effects of recycled aggregate, straw, and glazed hollow beads on the mechanical and thermal properties of recycled insulation concrete. The influence of different factors on the macroscopic characteristics of recycled insulation concrete was examined using scanning electron microscopy (SEM). The optimal mix proportion for recycled insulation concrete that satisfies mechanical performance standards and provides superior insulation performance was then determined using the total efficacy coefficient method. According to the research findings, the heat conductivity of recycled insulation concrete decreases as its dried density decreases. A 100% recycled coarse aggregate replacement rate, 1% straw content, and 10% glazed hollow beads replacement rate are the optimal mix ratios for recycled insulation concrete. With a compressive strength of 20.98 MPa, a splitting tensile strength of 2.01 MPa, a thermal conductivity of 0.3776 W/(mK), and a dry density of 1778.66 kg/m3, recycled insulation concrete has the optimal mix ratio. Recycled insulation concrete is a novel form of eco-friendly, energy-saving concrete that aims to achieve low-carbon energy savings and sustainable development by combining resource recycling with building energy savings to realize the recycling of solid waste resources, which has significant environmental, social, and economic benefits and broad market application potential.
The development of functional building materials that can absorb electromagnetic radiation is important for preventing and controlling electromagnetic pollution in urban areas. In this study, cement-based electromagnetic wave (EMW)-absorbing materials were created using graphite tailings (GTs) as a conductive admixture and steel fiber (SF) as an EMW absorber, which resulted in materials with a wide effective bandwidth and high reflection loss (RL). In particular, a GT–cement matrix with excellent mechanical and electrical properties was obtained. This study explored the influence mechanism of the SF content on the mechanical, electrical, and EMW-absorption properties of cement-based materials under the synergistic effect of GTs and SF. Findings demonstrate that the combination of GTs and SF notably improved the electrical and EMW-absorption characteristics of the cement-based materials. Optimal EMW-absorption properties were observed for a combination of 30% GTs and 6% SF. A developed cement-based EMW-absorbing material with a thickness of 20 mm displayed a minimum RL of −25.78 dB in the frequency range of 0.1–5 GHz, with an effective bandwidth of 0.953 GHz. Thus, the cement-based composite materials developed in this study have excellent EMW-absorption performance, which provides an effective strategy for preventing and controlling electromagnetic pollution in urban spaces.
About Me
Department of Civil Engineering and Architecture, Wuyi University, Wuyishan 354300, China. Email: tbwei@wuyiu.edu.cn (TBW)
Department of Civil Engineering and Architecture, Wuyi University, Wuyishan 354300, China. Email: tbwei@wuyiu.edu.cn (TBW)