During the processing of maraging steels, Titanium easily combines with Nitrogen to form nitride inclusions, known to be deleterious for fatigue properties of the alloy. According to thermodynamic calculations, the precipitation occurs during solidification of the vacuum arc remelted (VAR) ingot. A coupled model of titanium nitride (TiN) inclusion precipitation and vacuum remelting has been set-up to study the inclusion cleanliness of the ingot. The nitrogen content, nuclei numeral density and solidification time appear as the key factors which control the inclusion size.

The blast-furnace operating diagram proposed by Rist was revised to direct reduction and was specifically applied to the Midrex NG^TM process. The use of this graphical tool in the study of an industrial process highlighted the staggered nature of the reduction in the shaft furnace with, in particular, the existence of a prereduction zone in the upper part where metallization is thermodynamically impossible. A sensitivity study also showed the impact of the in situ reforming rate on the ability of the gas to completely reduce iron oxides. Finally, we graphically defined the minimum quality required for the top gas to produce direct-reduced iron.

The Electron Beam Melting (EBM) process has emerged as either an alternative or a complement to vacuum arc remelting of titanium alloys, since it is capable of enhancing the removal of exogenous inclusions by dissolution or sedimentation. The melting of the primary material is a first step of this continuous process, which has not been studied so far and is investigated experimentally and numerically in the present study. Experiments have been set up in a 100 kW laboratory furnace with the aim of analyzing the effect of melting rate on surface temperature of Ti-64 bars. It was found that melting rate is nearly proportional to the EB power while the overheating temperature remains roughly independent of the melting rate and equal to about 100 °C. The emissivity of molten Ti-64 was found to be 0.22 at an average temperature of about 1760 °C at the tip of the bar. In parallel, a mathematical model of the thermal behavior of the material during melting has been developed. The simulations revealed valuable results about the melting rate, global heat balance and thermal gradient throughout the bar, which agreed with the experimental values to a good extent. The modeling confirms that the overheating temperature of the tip of the material is nearly independent of the melting rate.

Extraction of rare earth elements from spent NdFeB magnets with liquid magnesium was investigated using a laboratory scale perfect stirred reactor. Data were processed to model Nd extraction performances for treating decrepitated magnet powder.

This article presents a new graphical tool for direct reduction shaft processes inspired by the Rist diagram developed for blast furnaces. The tool represents gas flows using vectors, with specific consumption and specific oxidation as components to indicate gas/iron ratios. Key features include consideration of gas chemical composition for vector directions, easy visual representation of gas mixtures, as well as reduction and carburization rates of direct reduced iron (DRI). The tool also includes thermodynamic conditions for reduction from the Chaudron diagram, analogous to the Rist diagram. Several practical applications are presented, including quantifying gas moisture, evaluating the measurement consistency of flowmeters and gas analyzers in top gas recycling, and evaluating instantaneous DRI production by analyzing reducing gas at the inlet and outlet of the shaft. This graphical tool could be useful for production teams to monitor and optimize process flows and promote understanding among students, engineers, technicians, and operators. Its potential for online use further enhances its practical value. As a result, the tool is of significant academic and industrial interest in improving process efficiency and optimization.