Two on step ahead wind speed forecasting models were compared. A univariate model was developed using a linear autoregressive integrated moving average (ARIMA). This method’s performance is well studied for a large number of prediction problems. The other is a multivariate model developed using a nonlinear autoregressive exogenous artificial neural network (NARX). This uses the variables: barometric pressure, air temperature, wind direction and solar radiation or relative humidity, as well as delayed wind speed. Both models were developed from two databases from two sites: an hourly average measurements database from La Mata, Oaxaca, Mexico, and a ten minute average measurements database from Metepec, Hidalgo, Mexico. The main objective was to compare the impact of the various meteorological variables on the performance of the multivariate model of wind speed prediction with respect to the high performance univariate linear model. The NARX model gave better results with improvements on the ARIMA model of between 5.5% and 10. 6% for the hourly database and of between 2.3% and 12.8% for the ten minute database for mean absolute error and mean squared error, respectively.

The main objective of this work is to analyze and configure appropriately the input vectors to enhance the performance of NARX models to forecast solar radiation one hour ahead. For this study, Engle–Granger causality tests were implemented. Additionally, collinearity among the meteorological variables of the databases was examined. Different databases were used to test the contribution of these analyses in the improvement of the input vectors. For that, databases from three cities of Mexico with different climates were obtained, namely: Chihuahua, Temixco, and Zacatecas. These databases consisted of hourly measurements of the following variables: solar radiation (SR), wind speed (WS), relative humidity (RH), pressure (P), and temperature (T). Results showed that, in all three cases, proper NARX models were produced even when using input vectors formed only with solar radiation and temperature data. Consequently, it was inferred that pressure, wind speed, and relative humidity could be excluded from the input vectors of the forecasting models since, according to the causality tests, they did not provide relevant information to improve the solar radiation forecast in the studied cases. Conversely, these variables could generate spurious results. Forecasting results obtained with the NARX model were compared to the smart persistence model, commonly used to validate SR prediction. Error measures, such as mean absolute error (MAE) and root mean squared error (RMSE), were used to compare prediction results obtained from different models. In all cases, results obtained from the enhanced NARX model surpassed the results of the smart persistence, namely: in Chihuahua up to $11.5\%$ , in Temixco up to $15.7\%$ , and in Zacatecas up to $27.2\%$ .

In this paper, a methodology for short-term forecasting of power generated by a photovoltaic module is reported. The method incorporates a nonlinear autoregressive with exogenous inputs (NARX) fed by the solar radiation and temperature times series, as well as an estimation of power time series obtained by implementing an ideal single diode model. This synthetic time series was validated against an actual photovoltaic module. The NARX model has been implemented in conjunction with the corrective vector multiplier (CVM) technique, which uses solar radiation under clear sky conditions to adjust the forecasting results. In addition, collinearity and the Granger causality tests were used to choose the input variables. The forecasting horizon was 24-h-ahead. The hybrid NARX-CVM model was compared to a nonlinear autoregressive neural network and persistence model using the typic forecasting error measures such as the mean bias error, mean squared error, root mean squared error and forecast skill. The results showed that the forecasting skills of the hybrid model are about 34% against the NAR model and about 42% against the Persistence model. The model was validated by blind forecasting. The results demonstrated evidence of the quality of the conformed forecasting model and the convenience of its implementation and building.

IEC 61400-2 establishes the Simplified Load Method for designing low-power wind turbine blades without considering dynamic loads in the simplified load methodology. This paper analyzes the load hypotheses established by the standard, also considering the natural frequencies in a 900 W blade. The research methodology begins with the design parameters, the application of the BEM Method, and the use of the QBlade software. Then, the load hypotheses of the standard are defined. Finally, the structural design and the modal and structural analysis of the blade were conducted using FEM-based software. The results show that the minimum participation factors are found on the z-axis and the maximum on the x- and y-axis, and their magnitudes decrease when the natural frequency increases. In general, the principal maximum stresses are located in the middle section of the blade, in the external fiberglass layer, both on the intrados and extrados sides. In conclusion, structural scenarios were established to relate the participation factors of the modal analyses with the load hypotheses. The critical scenarios are at natural frequencies below 280 Hz.