In this study, a perforated baffle design is proposed to improve mixing in contact tanks. Turbulent flow through the perforated baffle is studied at the perforation hole scale. The contribution of jets emerging from the perforations to the mixing process is evaluated in terms of standard mixing indexes for various perforation parameters, such as the solidity ratio and hole diameter. Based on numerical simulation results, the two sets of perforated baffles that yielded the highest performance were manufactured from polycarbonate and tracer studies were conducted on a laboratory model. Comparison of numerical and experimental results demonstrates that the numerical model developed is reliable in simulating the flow through the perforated baffles and the associated mixing level in the contact tank. Numerical simulations indicate that the jet flow structure through the perforated baffle penetrates to the recirculation zones in the neighboring chambers and turns the dead zones into active mixing zones. Furthermore, large scale turbulent eddies shed by the perforations contribute to the mixing process in the chambers of the tank. With the use of the perforated baffle design, it is shown that the hydraulic efficiency of the tank can be improved from average to superior according to the baffling factor, and the associated mixing in the proposed design can be improved by 31% according to the Morrill index.
Disinfection contact tanks facilitated in urban water treatment plants suffer from low hydraulic and mixing efficiencies, which may result in high chemical and energy usage to yield the required disinfection levels. Porous baffle design can effectively remedy the adverse effects of solid baffles by creating momentum exchange between neighbouring chambers with controllable porosity in the flow direction. Although previously developed baffle has been proved to enhance the efficiency of the contact system, porous baffle design has not yet been optimized. A simulation-optimization framework is developed by means of Computational Fluid Dynamics (CFD) simulations and employed for single and multi-objective optimization of the porosity. The optimized design of tripartite baffle improved hydraulic and mixing efficiencies by 50% and 56%, respectively. The integrated optimization framework developed in this study can effectively be used for the multi-objective optimization of porous baffle in the design of disinfection contact tanks.