α-MgAgSb is a promising p-type thermoelectric (TE) with excellent performance from room temperature up to 300 °C with a figure of merit of zTmax = 1.3. This makes MgAgSb a potential Te-free bismuth telluride (Bi2Te3) substitute for cooling and waste heat conversion applications. However, the material is also known for its sensitivity on synthesis conditions as indicated by various reports on the same nominal composition which show greatly differing TE properties and performance. This indicates a fundamental lack of synthesis control and synthesis–composition–property relationship knowledge. In this work, we establish a modified synthesis route with improved control over the effective sample stoichiometry which allows for reproducible high-performance properties (zTmax = 1.34 ± 0.19 at 561 K) and for systematically targeting different thermodynamic states of MgAgSb. This phase boundary mapping reveals that the homogeneity range for MgAgSb is very small (<0.1 at%) and that the TE properties are not governed by different thermodynamic states. Instead, we rationalize that the TE performance of MgAgSb is mainly controlled by the amount and type of secondary phases, mainly affecting the carrier mobility. We conclude that Sb-excess related secondary phases are the least detrimental, leading the way to upscaled synthesis of high-performance material.
New processes and materials are vital nowadays, since specific features of materials are essential to accomplish the more demanding technological and environmental requirements. Al/Ni system has stimulated a large number of phase equilibrium, thermodynamic, diffusion and related studies. Its relevance relays on first principle features as well as technological importance. Transient Liquid Phase Bonding (TLPB) process is presented in this work due to the advantages of this method above others. Low temperatures of processing are needed, to obtain stable intermetallic phases (IPs) suitable for high temperatures of service. The aim of this research is to investigate the impact of temperature on the IPs growth and formation mechanisms, completing previous works on microstructure and kinetics characterization of IPs in Al/Ni system at 720°C. The results of SEM-EDS/WDS analyses of the cross-sections of the bonds showed the presence of Al3Ni and Al3Ni2 at the beginning of the interaction between Al and Ni, which are consistent with the phase equilibrium diagram. The Al3Ni2 layer growth showed linear correlation with time at 800°C, whereas at 900 and 1000°C it suggested a diffusive growth. Inert markers experiments allowed distinguishing individual growth. Vickers micro-hardness was determined obtaining values for Ni and Al3Ni2 of about 100 and 800 HV/ 0.025, respectively.
Mg 2 (Si 0.3 Sn 0.7 )/Cu contact couple was selected to illustrate that equilibrium thermodynamic considerations are an efficient support to anticipate/identify reaction products in the bonded region, and ultimately, for improving the contact design.
The attractive properties of Al-Ni intermetallic phases and their extensive field of technological applications demands a thorough understanding of the system. In particular, kinetic experiences with Al/Ni diffusion-reaction couples using Transient Liquid Phase Bonding (TLPB) process deals with the simultaneous growing of intermetallic phases as multilayers in the interconnection zone. This work complements the first stages of morphology, chemical composition and microhardness characterization of these layers with conventional X-Ray Diffraction (XRD) experiments. XRD results obtained for the multilayer sequence in Al/Ni diffusion-reaction couples in range of 800-1170°C were analyzed. Al-rich phases Al3Ni, Al3Ni2 and Al1.1Ni0.9 were identified and associated with layers L1, L2 and L3, respectively. Nevertheless, singular layer experiments are required for Ni-rich phases identification
The Al–Ni system has been intensively studied both experimentally and theoretically. Previous first-principles calculations based on density-functional theory (DFT) typically investigate the stable phases of this system in their experimental stoichiometry. In this work, we present DFT calculations for the Al–Ni system that cover stable and metastable phases across the whole composition range for each phase. The considered metastable phases are relevant for applications as they are observed in engineering alloys based on Al–Ni. To model the Gibbs energies of solid phases of the Al–Ni system, we combine our DFT calculations with the compound energy formalism (CEF) that takes the Bragg–Williams–Gorsky approximation for the configurational entropy. Our results indicate that the majority of the investigated configurations have negative energy of formation with respect to Al fcc and Ni fcc. The calculated molar volumes for all investigated phases show negative deviations from Zen’s law. The thermodynamic properties at finite temperatures of individual phases allow one to predict the configurational contributions to the Gibbs energy. By applying a fully predictive approach without excess parameters, an acceptable topology of the DFT-based equilibrium phase diagram is obtained at low and intermediate temperatures. Further contributions can be added to improve the predictability of the method, such as phonons or going beyond the Bragg–Williams–Gorsky approximation that overestimates the stability range of the ordered phases. This is clearly demonstrated in the fcc order/disorder predicted metastable phase diagram.