Perfluorinated polymers are widely used in polymer electrolyte membranes because of their excellent ion conductivity, which are attributed to the well-defined morphologies resulting from their extremely hydrophobic main-chains and flexible hydrophilic side-chains. Perfluorinated polymers containing quaternary ammonium groups were prepared from Nafion- and Aquivion-based sulfonyl fluoride precursors by the Menshutkin reaction to give anion exchange membranes. Perfluorinated polymers tend to exhibit poor solubility in organic solvents; however, clear polymer dispersions and transparent membranes were successfully prepared using N-methyl-2-pyrrolidone at high temperatures and pressures. Both perfluorinated polymer-based membranes exhibited distinct hydrophilic-hydrophobic phase-separated morphologies, resulting in high ion conductivity despite their low ion exchange capacities and limited water uptake properties. Moreover, it was found that the capacitive deionization performances and stabilities of the perfluorinated polymer membranes were superior to those of the commercial Fumatech membrane.
This study evaluates the chemical and mechanical durability of membranes used in proton exchange membrane fuel cells, highlighting the essential role of electrochemical tests in understanding the relationship between durability and performance. Our methodology integrates various electrochemical evaluation techniques to assess the degradation of perfluorosulfonic acid (PFSA) membranes. The results highlight the considerable improvement in the chemical and mechanical durability of annealed 3M PFSA-reinforced composite membranes (RCMs) compared with their non-annealed counterparts and other membrane types, indicating their superior resilience under challenging conditions. Moreover, the results of using a combined open-circuit voltage-accelerated stability testing protocol demonstrate that annealed 3M PFSA RCMs exhibit enhanced resilience, reaching 18,000 cycles before failure, considerably outperforming NR 211 (5000 cycles) and other membranes. In addition, membrane deterioration over time can be precisely measured by interpreting electrochemical indicators (electrochemically active surface area, circuit resistance, high-frequency resistance, and proton resistance). This approach provides a clear relationship between electrochemical data and durability, offering a comprehensive understanding of how different membranes withstand operational stresses.
Several methods to synthesize poly(phenylene) block copolymers through the nickel coupling reaction were attempted to reduce the use of expensive nickel catalysts in polymerization. The model reaction for poly(phenylene) having different types of dichlorobenzene derivative monomers illustrated the potential use of cost-effective catalysts, such as NiBr2 and NiCl2, as alternatives to more expensive catalysts (e.g., bis(1,5-cyclooctadiene)nickel(0) (Ni(COD)2)). By catalyzing the polymerization of multi-block poly(phenylene) with NiBr2 and NiCl2, random copolymers with similar molecular weights could be prepared. However, these catalysts did not result in a high-molecular-weight polymer, limiting their wide scale application. Further, the amount of Ni(COD)2 could be reduced in this study by approximately 50% to synthesize poly(phenylene) multi-block copolymers, representing significant cost savings. Gel permeation chromatography and nuclear magnetic resonance results showed that the degree of polymerization and ion exchange capacity of the copolymers were almost the same as those achieved through conventional polymerization using 2.5 times as much Ni(COD)2. The flexible quaternized membrane showed higher chloride ion conductivity than commercial Fumatech membranes with comparable water uptake and promising chemical stability.