Plastic waste that has not been appropriately managed has caused concern for various stakeholders and has a negative impact on the environment. A way to minimize this issue is by promoting a circular economy through recycling. Despite this, many plastic wastes cannot be economically recycled; one of them is multilayer plastics due to the difficulty in sorting out the various types of materials contained in the layers. As an alternative, it may be possible to utilize multilayer plastic as a bitumen mixture; this method may avoid the separation process entirely. Bitumen is a component of asphalt, which is crucial to the construction of infrastructure. Plastics can potentially enhance the properties of modified bitumen, and they would assist in enhancing the quality of the asphalt. The aim of this study is to examine the impact of multilayer waste plastics on bitumen fabricated by the hot-mixing process. To enhance the compatibility between hydrophobic plastic and hydrophilic bitumen, lignin was used as a compatibilizer. The properties of bitumen with 3, 4, and 5 wt.% multilayer plastic and mixing times of 15, 30, and 45 minutes were evaluated. Accordingly, surface, chemical, thermal properties, and morphology were evaluated using sessile drop tests, Fourier Transform Infrared, thermogravimetry analysis, and scanning electron microscopy.
Several methods to synthesize poly(phenylene) block copolymers through the nickel coupling reaction were attempted to reduce the use of expensive nickel catalysts in polymerization. The model reaction for poly(phenylene) having different types of dichlorobenzene derivative monomers illustrated the potential use of cost-effective catalysts, such as NiBr2 and NiCl2, as alternatives to more expensive catalysts (e.g., bis(1,5-cyclooctadiene)nickel(0) (Ni(COD)2)). By catalyzing the polymerization of multi-block poly(phenylene) with NiBr2 and NiCl2, random copolymers with similar molecular weights could be prepared. However, these catalysts did not result in a high-molecular-weight polymer, limiting their wide scale application. Further, the amount of Ni(COD)2 could be reduced in this study by approximately 50% to synthesize poly(phenylene) multi-block copolymers, representing significant cost savings. Gel permeation chromatography and nuclear magnetic resonance results showed that the degree of polymerization and ion exchange capacity of the copolymers were almost the same as those achieved through conventional polymerization using 2.5 times as much Ni(COD)2. The flexible quaternized membrane showed higher chloride ion conductivity than commercial Fumatech membranes with comparable water uptake and promising chemical stability.
13 July 2024 in Advanced Manufacturing: Polymer & Composites Science