Farah Zaremotekhases

Ms. Farah Zaremotekhases

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 April 2020 in Energies
Verified
Journal Article
Open access
PDF file
Nader KarballaeezadehNader Karballaeezadeh
Nader Karballaeezadeh
FZFarah Zaremotekhases
Farah Zaremotekhases
SSShahaboddin Shamshirband
Shahaboddin Shamshirband
Amir MosaviAmir Mosavi
Amir Mosavi
NNNarjes Nabipour
Narjes Nabipour
Várkonyi-Kóczy AnnamáriaVárkonyi-Kóczy Annamária
Várkonyi-Kóczy Annamária
Prediction models in mobility and transportation maintenance systems have been dramatically improved by using machine learning methods. This paper proposes novel machine learning models for an intelligent road inspection. The traditional road inspection systems based on the pavement condition index (PCI) are often associated with the critical safety, energy and cost issues. Alternatively, the proposed models utilize surface deflection data from falling weight deflectometer (FWD) tests to predict the PCI. Machine learning methods are the single multi-layer perceptron (MLP) and radial basis function (RBF) neural networks as well as their hybrids, i.e., Levenberg–Marquardt (MLP-LM), scaled conjugate gradient (MLP-SCG), imperialist competitive (RBF-ICA), and genetic algorithms (RBF-GA). Furthermore, the committee machine intelligent systems (CMIS) method was adopted to combine the results and improve the accuracy of the modeling. The results of the analysis have been verified through using four criteria of average percent relative error (APRE), average absolute percent relative error (AAPRE), root mean square error (RMSE) and standard error (SE). The CMIS model outperforms other models with the promising results of APRE = 2.3303, AAPRE = 11.6768, RMSE = 12.0056 and SD = 0.0210.

20 January 2020 in Preprints.org
Verified
Preprint
Open access
Nader KarballaeezadehNader Karballaeezadeh
Nader Karballaeezadeh
FZFarah Zaremotekhases
Farah Zaremotekhases
SSShahaboddin Shamshirband
Shahaboddin Shamshirband
Amir MosaviAmir Mosavi
Amir Mosavi
NNNarjes Nabipour
Narjes Nabipour
AVAnnamária R. Várkonyi-Kóczy
Annamária R. Várkonyi-Kóczy
Prediction models in mobility and transportation maintenance systems have been dramatically improved through using machine learning methods. This paper proposes novel machine learning models for an intelligent road inspection. The traditional road inspection systems based on the pavement condition index (PCI) are often associated with the critical safety, energy and cost issues. Alternatively, the proposed models utilize surface deflection data from falling weight deflectometer (FWD) tests to predict the PCI. Machine learning methods are the single multi-layer perceptron (MLP) and radial basis function (RBF) neural networks as well their hybrids, i.e., Levenberg-Marquardt (MLP-LM), scaled conjugate gradient (MLP-SCG), imperialist competitive (RBF-ICA), and genetic algorithms (RBF-GA). Furthermore, the committee machine intelligent systems (CMIS) method was adopted to combine the results and improve the accuracy of the modeling. The results of the analysis have been verified through using four criteria of average percent relative error (APRE), average absolute percent relative error (AAPRE), root mean square error (RMSE), and standard error (SD). The CMIS model outperforms other models with the promising results of APRE=2.3303, AAPRE=11.6768, RMSE=12.0056, and SD=0.0210.

7 May 2023 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
FZFarah Zaremotekhases
Farah Zaremotekhases
AHAdam Hunsaker
Adam Hunsaker
EDEshan Dave
Eshan Dave
JSJo Sias
Jo Sias
LiDAR technology, increasingly prevalent in various applications, has not been significantly used for assessing pavement elevation changes due to frost-induced heaves. This research examines the efficiency and accuracy of LiDAR sensors mounted on an Unpiloted Aerial System (UAS) to measure pavement frost heaves in remote cold climate regions. Experiments on simulated heaves and actual pavement sections assessed flight pattern data gathering protocols and data processing methods. Optimal measurements of simulated frost heave were achieved with a 45m altitude, 2m/s ground speed, and 10cm x 10cm spatial resolution. The finalized protocol was applied to in-service pavement sites in a cold climate region, comparing seasonal results to demonstrate the ability of LiDAR sensors to capture frost-induced heaving on road surfaces. The study shows that UAS-LiDAR can reliably capture vertical deviations due to surface roughness, supporting the development of an automated system to measure pavement roughness caused by frost heave distresses.

11 November 2022 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
FZFarah Zaremotekhases
Farah Zaremotekhases
AHAdam Hunsaker
Adam Hunsaker
EDEshan Dave
Eshan Dave
JSJo Sias
Jo Sias
The combination of low temperatures, precipitation, and high-water table causes the formation of subsurface frost in pavements leading to the formation of frost heaves. This leads to significant damage to the structural integrity of the pavements and causes extensive surface roughness. Frost heaving is a common type of distress in cold climate regions, especially for road and airport infrastructures located in remote areas. Research discussed in this article focuses on determining the efficiency and accuracy of photogrammetry-based sensing systems to measure the extent of pavement frost heaves. The sensors are mounted on an unpiloted aircraft system (UAS) capable of providing measurements over large spatial domains in a single flight and are well suited for difficult-to-access regions. Experiments have been conducted on simulated heaves as well as actual cold climate pavement sections. The research described herein provides suitable UAS flight parameters for conducting frost heave measurements. Flight at an altitude of 50 m above the ground surface and a flight speed of 5 m/s with capturing images every 2 s resulted in more than 80 % front and side image overlap. The pavement surface profile has been constructed from extracted photogrammetry elevation data collected in three different seasons. Pavement surface roughness has been measured in terms of the international roughness index (IRI), and variation between measured IRI values has been evaluated during different seasons because of the formation of the frost heave distress. As it is expected, the IRI values increase as the cold season approaches. Moreover, the measured IRI values have been compared with the most recent available IRI data collected by an instrumented vehicle. The key outcomes of this work demonstrate that photogrammetry can reliably detect pavement frost heaves and provide high confidence in the future development of an automated system to measure pavement roughness that is attributable to frost heave distresses.

18 January 2020 in arXiv
Verified
Preprint
Open access
PDF file
Nader KarballaeezadehNader Karballaeezadeh
Nader Karballaeezadeh
FZFarah Zaremotekhases
Farah Zaremotekhases
SSShahaboddin Shamshirband
Shahaboddin Shamshirband
Amir MosaviAmir Mosavi
Amir Mosavi
NNNarjes Nabipour
Narjes Nabipour
KKKalman Kando
Kalman Kando
Prediction models in mobility and transportation maintenance systems have been dramatically improved through using machine learning methods. This paper proposes novel machine learning models for intelligent road inspection. The traditional road inspection systems based on the pavement condition index (PCI) are often associated with the critical safety, energy and cost issues. Alternatively, the proposed models utilize surface deflection data from falling weight deflectometer (FWD) tests to predict the PCI. Machine learning methods are the single multi-layer perceptron (MLP) and radial basis function (RBF) neural networks as well as their hybrids, i.e., Levenberg-Marquardt (MLP-LM), scaled conjugate gradient (MLP-SCG), imperialist competitive (RBF-ICA), and genetic algorithms (RBF-GA). Furthermore, the committee machine intelligent systems (CMIS) method was adopted to combine the results and improve the accuracy of the modeling. The results of the analysis have been verified through using four criteria of average percent relative error (APRE), average absolute percent relative error (AAPRE), root mean square error (RMSE), and standard error (SD). The CMIS model outperforms other models with the promising results of APRE=2.3303, AAPRE=11.6768, RMSE=12.0056, and SD=0.0210.