Accurate prediction of the remaining service life (RSL) of pavement is essential for the design and construction of roads, mobility planning, transportation modeling as well as road management systems. However, the expensive measurement equipment and interference with the traffic flow during the tests are reported as the challenges of the assessment of RSL of pavement. This paper presents a novel prediction model for RSL of road pavement using support vector regression (SVR) optimized by particle filter to overcome the challenges. In the proposed model, temperature of the asphalt surface and the pavement thickness (including asphalt, base and sub-base layers) are considered as inputs. For validation of the model, results of heavy falling weight deflectometer (HWD) and ground-penetrating radar (GPR) tests in a 42-km section of the Semnan–Firuzkuh road including 147 data points were used. The results are compared with support vector machine (SVM), artificial neural network (ANN) and multi-layered perceptron (MLP) models. The results show the superiority of the proposed model with a correlation coefficient index equal to 95%.
14 September 2020 in Frontiers of Structural and Civil Engineering
Prediction of the remaining service life (RSL) of pavement is a challenging task for road maintenance and transportation engineering. The prediction of the RSL estimates the time that a major repair or reconstruction becomes essential. The conventional approach to predict RSL involves using non-destructive tests. These tests, in addition to being costly, interfere with traffic flow and compromise operational safety. In this paper, surface distresses of pavement are used to estimate the RSL to address the aforementioned challenges. To implement the proposed theory, 105 flexible pavement segments are considered. For each pavement segment, the type, severity, and extent of surface damage and the pavement condition index (PCI) were determined. The pavement RSL was then estimated using non-destructive tests include falling weight deflectometer (FWD) and ground-penetrating radar (GPR). After completing the dataset, the modeling was conducted to predict RSL using three techniques include support vector regression (SVR), support vector regression optimized by the fruit fly optimization algorithm (SVR-FOA), and gene expression programming (GEP). All three techniques estimated the RSL of the pavement by selecting the PCI as input. The correlation coefficient (CC), Nash–Sutcliffe efficiency (NSE), scattered index (SI), and Willmott’s index of agreement (WI) criteria were used to examine the performance of the three techniques adopted in this study. In the end, it was found that GEP with values of 0.874, 0.598, 0.601, and 0.807 for CC, SI, NSE, and WI criteria, respectively, had the highest accuracy in predicting the RSL of pavement.
Prediction models in mobility and transportation maintenance systems have been dramatically improved by using machine learning methods. This paper proposes novel machine learning models for an intelligent road inspection. The traditional road inspection systems based on the pavement condition index (PCI) are often associated with the critical safety, energy and cost issues. Alternatively, the proposed models utilize surface deflection data from falling weight deflectometer (FWD) tests to predict the PCI. Machine learning methods are the single multi-layer perceptron (MLP) and radial basis function (RBF) neural networks as well as their hybrids, i.e., Levenberg–Marquardt (MLP-LM), scaled conjugate gradient (MLP-SCG), imperialist competitive (RBF-ICA), and genetic algorithms (RBF-GA). Furthermore, the committee machine intelligent systems (CMIS) method was adopted to combine the results and improve the accuracy of the modeling. The results of the analysis have been verified through using four criteria of average percent relative error (APRE), average absolute percent relative error (AAPRE), root mean square error (RMSE) and standard error (SE). The CMIS model outperforms other models with the promising results of APRE = 2.3303, AAPRE = 11.6768, RMSE = 12.0056 and SD = 0.0210.
The pavement is a complex structure that is influenced by various environmental and loading conditions. The regular assessment of pavement performance is essential for road network maintenance. International roughness index (IRI) and pavement condition index (PCI) are well-known indices used for smoothness and surface condition assessment, respectively. Machine learning techniques have recently made significant advancements in pavement engineering. This paper presents a novel roughness-distress study using random forest (RF). After determining the PCI and IRI values for the sample units, the PCI prediction process is advanced using RF and random forest trained with a genetic algorithm (RF-GA). The models are validated using correlation coefficient (CC), scatter index (SI), and Willmott’s index of agreement (WI) criteria. For the RF method, the values of the three parameters mentioned were −0.177, 0.296, and 0.281, respectively, whereas in the RF-GA method, −0.031, 0.238, and 0.297 values were obtained for these parameters. This paper aims to fulfill the literature’s identified gaps and help pavement engineers overcome the challenges with the conventional pavement maintenance systems.
This paper proposes a method for monitoring the structural health of concrete bridges in Iran. In this method, the bridge condition index (BCI) of bridges is determined by the analytical hierarchy process (AHP). BCI constitutes eight indices that are scored based on the experts’ views, including structural, hydrology and climate, safety, load impact, geotechnical and seismicity, strategic importance, facilities, and traffic and pavement. Experts’ views were analyzed by Expert Choice software, and the relative importance (weight) of all eight indices were determined using AHP. Moreover, the scores of indices for various conditions were extracted from experts’ standpoints. BCI defines as the sum of weighted scores of indices. Bridge inspectors can examine the bridge, determine the scores of indices, and compute BCI. Higher values of BCI indicate better conditions. Therefore, bridges with lower BCI take priority in maintenance activities. As the case studies, the authors selected five bridges in Iran. Successful implementation of the proposed method for these case studies verified that this method can be applied as an easy-to-use optimization tool in health monitoring and prioritizing programs.