Drilling fluid and filtrates invasion often alter the near-wellbore flow properties during overbalanced drilling. The utilization of polymeric gels to prevent drilling fluid loss reduces the risk of formation damage caused by this alteration. In this study, the internal and external filter cake evolution by polyacrylamide (PAM) cross-linked with polyethylenimine (PEI) was investigated. The analysis conducted in this study showed that the cross-linked polymer activates and forms a mature gel inside the formation’s pores. Gel also formed a dense uniform structure on the rock’s surface, preventing further fluid loss. A high sealing pressure of up to 1000 psi was achieved, allowing drilling to continue without the need for additional casing string to prevent lost circulation. Moreover, the PAM/PEI formula showed less invasion of filtrate and evolution of a thin shallow internal filter cake that penetrated less than half of the filter disk thickness. In comparison to the full invasion and particle depositions that occurred with the water-based mud (WBM), the PAM/PEI formula is expected to reduce the impact of lost circulation materials (LCMs) on formation damage.
The traditional way to mitigate loss circulation in drilling operations is to use preventative and curative materials. However, it is difficult to quantify the amount of materials from every possible combination to produce customized rheological properties. In this study, machine learning (ML) is used to develop a framework to identify material composition for loss circulation applications based on the desired rheological characteristics. The relation between the rheological properties and the mud components for polyacrylamide/polyethyleneimine (PAM/PEI)-based mud is assessed experimentally. Four different ML algorithms were implemented to model the rheological data for various mud components at different concentrations and testing conditions. These four algorithms include (a) k-Nearest Neighbor, (b) Random Forest, (c) Gradient Boosting, and (d) AdaBoosting. The Gradient Boosting model showed the highest accuracy (91 and 74% for plastic and apparent viscosity, respectively), which can be further used for hydraulic calculations. Overall, the experimental study presented in this paper, together with the proposed ML-based framework, adds valuable information to the design of PAM/PEI-based mud. The ML models allowed a wide range of rheology assessments for various drilling fluid formulations with a mean accuracy of up to 91%. The case study has shown that with the appropriate combination of materials, reasonable rheological properties could be achieved to prevent loss circulation by managing the equivalent circulating density (ECD).
30 October 2020 in Journal of Energy Resources Technology
Steelmaking is an energy-intensive process that generates considerable amounts of by-products and wastes, which often pose major environmental and economic challenges to the steel-making industry. One of these by-products is steel dust that is produced during the separation of impurities in the smelting and refining of metals in steel-making furnaces. In this study, electric arc furnace (EAF) dust has been evaluated as a potential, low-cost additive to increase the viscosity and weight of drilling muds. Currently, the cost of drilling operations typically accounts for 50 to 80% of the exploration costs and about 30 to 80% of the subsequent field development costs. Utilization of steelmaking waste in drilling fluids formulations is aimed to produce new and optimized water-based drilling formulations, which is expected to reduce the amount of bentonite and other viscosifier additives used in the drilling formulations. The results showed that in a typical water-based drilling fluid of 8.6 ppg (1030.51 kg/m3), the amount of standard drilling grade bentonite could be reduced by 30 wt.% with the addition of the proposed new additive to complete the required mud weight. The mixture proved to be stable with no phase separation.