Aluminum alloys are widely used in many industries, including aerospace, automotive, civil, and electrical engineering. When compared to pure aluminum, most aluminum alloys have lower electrical and thermal conductivity, corrosion resistance, and weldability, as well as a low density and specific gravity. At the same time, the properties of aluminum alloys vary significantly depending on the group, which has a significant impact on their machinability. This review article is focused on the study of machining characteristics of aluminum alloys, such as machinability, surface integrity, tool wear and tool life, material removal rate (MRR), and chip morphology. The directions of increasing machinability by controlling cutting parameters, cutting environment, such as dry machining, conventional cooling systems, minimum quantity of lubricant (MQL), cryogenic lubrication (CL), with tool geometry, and textured tools, are also considered; tool materials include coating, vibration, thermally, and hybrid assisted machining. The article discusses the main types of machining, namely, turning, milling, drilling, and grinding. It shows ways to increase the machinability of machining on aluminum alloys, as well as the advantages and disadvantages. From the literature, it can be concluded that tool wear when machining aluminum alloys is 30–40% lower than when machining steel alloys due to their higher ductility and lower strength. Surface integrity, affected by the cutting parameters and cutting temperatures — which can reach between 200 and 400 °C — can vary by up to 15% in hardness and 20% in surface roughness. Cutting tool characteristics can enhance surface finish by up to 25% and extend tool life, reducing edge formation by up to 30%. Chip morphology, influenced by factors such as cutting parameters and tool material, can improve tool life by up to 35%. Vibration techniques can reduce thermal effects and improve surface finish by up to 40%, reducing cutting forces by around 30%.

Recently, magnesium (Mg) has gained attention as a potential material for orthopedics devices, owing to the combination of its biodegradability and similar mechanical characteristics to those of bones. However, the rapid decay rate of Mg alloy is one of the critical barriers amongst its widespread applications that have provided numerous research scopes to the scientists. In this present, porous Mg-based biodegradable structures have been fabricated through the hybridization of elemental alloying and spark plasma sintering technology. As key alloying elements, the suitable proportions of silicon (Si) and hydroxyapatite (HA) are used to enhance the mechanical, chemical, and geometrical features. It has been found that the addition of HA and Si element results in higher degree of structural porosity with low elastic modulus and hardness of the Mg–Zn–Mn matrix, respectively. Further, addition of both HA and Si elements has refined the grain structure and improved the hardness of the as-fabricated structures. Moreover, the characterization results validate the formation of various biocompatible phases, which enhances the corrosion performance and biomechanical integrity. Moreover, the fabricated composites show an excellent bioactivity and offer a channel/interface to MG-63 cells for attachment, proliferation and differentiation. The overall results of the present study advocate the usefulness of developed structures for orthopedics applications.