In this study, the numerical wave model Simulating Waves Nearshore (SWAN), which resolves nearshore wave processes, and a hydrodynamic model, the Finite-Volume Community Ocean Model (FVCOM), were coupled to simulate waves and currents during Typhoon Fung-wong (2014) and Typhoon Chan-hom (2015) around the Zhoushan Islands. Both of these models employ the same unique unstructured grid. In particular, the influence of sea-surface currents, e.g., typhoon-induced and tidal currents, as well as the sea-water level, on wave simulation was studied. The composite wind field, which is derived from the parametric Holland model and European Centre for Medium-Range Weather Forecasts (ECMWF) winds (H-E winds), was taken as the forcing field. TPXO.5 tide data, sea-surface temperatures from the HYbrid Coordinate Ocean Model (HYCOM), HYCOM sea-surface salinity, and HYCOM sea-surface current were treated as open-boundary conditions. The comparison of sea-surface-current speed between the FVCOM simulation and the National Centers for Environmental Prediction (NCEP) Climate Forecast System Version 2 (CFSv2) data revealed a root-mean-square error (RMSE) of about 0.1206 m/s, with a correlation (Cor) more than 0.8, while the RMSE of the simulated sea-water level when compared with the HYCOM data was around 0.13 m, with a Cor of about 0.86. The validation indicated that the simulated results in this study were reliable. A sensitive experiment revealed that the sea-water level affected the typhoon-induced wave simulation. Validation against the measurements from the moored buoys showed an RMSE of <0.9 m for the sea-water level, which specifically reflected less overestimation during the high-sea state. Moreover, the significant-wave-height (SWH) difference (SWH without the sea-water level minus SWH with the sea-water level) was as great as −0.5 m around the Zhoushan Islands during the low-sea state. Furthermore, we studied the typhoon-induced waves when Typhoon Fung-wong passed the Zhoushan Islands, revealing that the reduction of SWH could be up to 1 m in the Yangtze Estuary and tidal flats when the maximum waves occurred.

The Beibu Gulf is an important offshore region in the South China Sea for the fishing industry and other human activities. In 2017, typhoons Doksuri and Khanun passed the Beibu Gulf in two paths, at maximum wind speeds of up to 50 m/s. Typhoon Doksuri passed the Beibu Gulf through the open waters of the South China Sea and Typhoon Khanun moved towards the Beibu Gulf through the narrow Qiongzhou Strait. The aim of this study is to analyze the typhoon-induced wave distribution in the Beibu Gulf. WAVEWATCH-III (WW3) is a third-generation numeric wave model developed by the National Oceanic and Atmospheric Administration (NOAA), which has been widely used for sea wave research. The latest version of the WW3 (5.16) model provides three packages of nonlinear term for four wave components (quadruplets) wave–wave interactions, including Discrete Interaction Approximation (DIA), Full Boltzmann Integral (WRT), and Generalized Multiple DIA (GMD) with two kinds of coefficients, herein called GMD1 and GMD2. These four packages have been conveniently implemented for simulating wave fields in two typhoons after taking winds from the European Centre for Medium-Range Weather Forecasts (ECMWF) at 0.125° grids as the forcing fields. It was found that the GMD2 package was the recommended option of the nonlinear term for quadruplets wave–wave interactions due to the minimum error when comparing a number of simulated results from the WW3 model with significant wave height (SWH) from ECMWF and altimeter Jason-2. Then the wave distribution simulated by the WW3 model employing the GMD2 package was analyzed. In the case of Typhoon Doksuri, wind-sea dominated in the early and middle stages while swell dominated at the later stage. However, during Typhoon Khanun, wind-sea dominated throughout and swell distributed outside the bay around the east of Hainan Island, because the typhoon-induced swell at mesoscale was difficult to propagate into the Beibu Gulf through the narrow Qiongzhou Strait.

The purpose of our work is to investigate the performance of fusion wind from multiple remote-sensed data in forcing numeric wave models, and the experiment is described herein. In this study, 0.125° gridded wind fields at 12 h intervals were fused by using swath products from an advanced scatterometer (ASCAT) (a Haiyang-2B (HY-2B) scatterometer) and a spaceborne polarimetric microwave radiometer (WindSAT) during the period November 2019 to October 2020. The daily average wind speeds were compared with observations from National Data Buoy Center (NDBC) buoys from the National Oceanic and Atmospheric Administration (NOAA), yielding a 1.66 m/s root mean squared error (RMSE) with a 0.81 correlation (COR). This suggests that fusion wind was reliable for our work. The fusion winds were used for hindcasting sea surface waves by using two third-generation numeric wave models, denoted as WAVEWATCH-III (WW3) and Simulation Wave Nearshore (SWAN). The WW3-simulated waves in the North Pacific Ocean and the SWAN-simulated waves in the Gulf of Mexico were validated against the measurements from the NDBC buoys and the European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis (ERA-5) for the period June−September 2020. The analysis of significant wave heights (SWHs) up to 9 m yielded a < 0.5 m RMSE with a > 0.8 COR for the WW3 and SWAN models. Therefore, it was believed that the accuracy of the simulation using the two numeric models was comparable with that forced by a numeric atmospheric model. An error analysis was systematically conducted by comparing the modeled WW3-simulated SWHs with the monthly average products from the HY-2B and a Jason-3 altimeter over global seas. The seasonal analysis showed that the differences in the SWHs (i.e., altimeter minus the WW3) were within ±1.5 m in March and June; however, the difference was quite significant in December. It was concluded that remote-sensed fusion wind can serve as a driving force for hindcasting waves using numeric wave models.

It is well known that numerical models are powerful methods for wave simulation of typhoons, where the sea surface drag coefficient is sensitive to strong winds. With the development of remote sensing techniques, typhoon data (i.e., wind and waves) have been captured by optical and microwave satellites such as the Chinese-French Oceanography SATellite (CFOSAT). In particular, wind and wave spectra data can be simultaneously measured by the Surface Wave Investigation and Monitoring (SWIM) onboard CFOSAT. In this study, existing parameterizations for the drag coefficient are implemented for typhoon wave simulations using the WAVEWATCH-III (WW3) model. In particular, a parameterization of the drag coefficient derived from sea surface roughness is adopted by considering the terms for wave steepness and wave age from the measurements from SWIM products of CFOSAT from 20 typhoons during 2019–2020 at winds up to 30 m/s. The simulated significant wave height (H_s) from the WW3 model was validated against the observations from several moored buoys active during three typhoons, i.e., Typhoon Fung-wong (2014), Chan-hom (2015), and Lekima (2019). The analysis results indicated that the proposed parameterization of the drag coefficient significantly improved the accuracy of typhoon wave estimation (a 0.49 m root mean square error (RMSE) of H_s and a 0.35 scatter index (SI)), greater than the 0.55 RMSE of H_s and >0.4 SI using other existing parameterizations. In this sense, the adopted parameterization for the drag coefficient is recommended for typhoon wave simulations using the WW3 model, especially for sea states with H_s < 7 m. Moreover, the accuracy of simulated waves was not reduced with growing winds and sea states using the proposed parameterization. However, the applicability of the proposed parameterization in hurricanes necessitates further investigation at high winds (>30 m/s).