This paper presents a method for predicting parasitic capacitances of solenoid HF inductors made of one layer of turns with circular cross sections, uniformly wound around a cylindrical nonconductive core. The method is based on an analytical approach to obtain the turn-to-turn and turn-to-shield capacitances of coils. The influence of the wire insulation is taken into account. An equivalent lumped parallel capacitance is derived. The method was tested by experimental measurements. The calculated and measured values were in good agreement in the considered cases. The derived expressions are useful for designing HF inductors and can also be adopted for modeling and simulation purposes

We propose a model with frequency-dependent lumped parameters to represent the behavior of laminated iron-core inductors that are used in switching converters, i.e., for excitation frequencies above several kilohertz. The model applies to laminated iron cores with air gaps. We show that the core parameters can be calculated by using the same analytical expressions as those valid for gapless cores if a properly defined equivalent magnetic permeability is introduced instead of the iron sheet permeability. We compare the inductor model parameters calculated as functions of frequency with those obtained by measurements for two test inductors. The behavior of the inductors showed that the effects due to the eddy currents in the laminated iron core and the turn-to-turn and turn-to-core stray capacitances become significant in different frequency ranges.

In this paper, an inverter-fed ac motor drive is analyzed in order to investigate the conducted electromagnetic interferences at both the input and output sides of the inverter. HF lumped equivalent circuits for the inverter and the motor stator windings are proposed. The overall circuit model allows time- and frequency-domain analysis to be performed with standard circuit simulators. The proposed model can also predict common- and differential-mode HF current components. The equivalent circuit is verified by experimental tests carried out on a prototype of ac motor drive.