Kawthar Frikha

Dr. Kawthar Frikha

Institut de Science des Matériaux de Mulhouse IS2M

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
KFKawthar Frikha
Kawthar Frikha
Lionel LimousyLionel Limousy
Lionel Limousy
JCJoan Pons Claret
Joan Pons Claret
CVCyril Vaulot
Cyril Vaulot
KPKarin Florencio Pérez
Karin Florencio Pérez
Simona BENNICISimona BENNICI
Simona BENNICI
The present study investigates the potential of waste tires to produce a valuable adsorbent material for application in wastewater treatment. In the first stage, the pyrolysis of ground rubber tire was explored using non-isothermal and isothermal thermogravimetric analysis experiments. The effect of operating parameters, such as heating rate and pyrolysis temperature, on the pyrolysis product yields was considered. The slow pyrolysis of ground rubber tire was taken up in a large-scale fixed-bed reactor for enhanced char recovery. Four pyrolysis temperatures were selected by thermogravimetric data. The product yields were strongly influenced by the pyrolysis temperature; at higher temperatures, the formation of more gases and liquid was favored, while at lower pyrolysis temperatures, more char (solid fraction) was formed. The produced chars were characterized in terms of mineral composition, textural properties, proximate analysis, and structural properties to identify the relationships between the pyrolysis temperature and the char properties. In a second step, a series of activated chars were prepared, starting from the pyrolytic chars via chemical and/or physical activation methods. Then, the activated chars were characterized and tested as adsorbents for atrazine and ibuprofen. Adsorption experiments in aqueous media were carried out in a small-scale batch reactor system. Chemical activation seems appropriate to significantly reduce the inorganic compounds initially present in ground rubber tire and contribute to an important increase in the surface area and porosity of the chars. Adsorption experiments indicated that chemically activated chars exhibit high aqueous adsorption capacity for atrazine.

11 October 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
KFKawthar Frikha
Kawthar Frikha
Lionel LimousyLionel Limousy
Lionel Limousy
MAMuhammad Bilal ARIF
Muhammad Bilal ARIF
NTNicolas Thevenin
Nicolas Thevenin
LRLionel Ruidavets
Lionel Ruidavets
Simona BENNICISimona BENNICI
Simona BENNICI
The present study focuses on the valorisation of winery industry wastes through slow pyrolysis of exhausted grape marc (EGM). The optimal pyrolysis parameters were firstly identified by small scale experiments carried out using thermogravimetric analysis. Nine pyrolysis temperatures were tested and their influence on the decomposition of the EGM residue and biochar yield was evaluated. Then, biochar production was conducted in a pilot plant at three chosen temperatures (450, 500 and 550 °C) at which the biochar was shown to be stable. The effects of biochar application to soil with respect to plant (ryegrass) growth was also evaluated. Pyrolysis of EGM at the 450–550 °C temperature range has been shown to generate thermally stable and nutrient-rich biochars, but only the biochar produced at 450 °C showed a marked benefit effect of ryegrass growth.

16 June 2020 in Energies
Verified
Journal Article
Open access
PDF file
KFKawthar Frikha
Kawthar Frikha
Simona BENNICISimona BENNICI
Simona BENNICI
JBJamel Bouaziz
Jamel Bouaziz
KCKamel CHAARI
Kamel CHAARI
Lionel LimousyLionel Limousy
Lionel Limousy
Three series of binary metal oxide catalysts containing Ni, Cu, or Co oxides were prepared, fully characterized and tested in CO oxidation. The catalysts, with a constant transition metal loading of 10 wt%, were prepared from metal nitrates and urea mixtures by a microwave-assisted solution combustion method. The RV/OV ratio, corresponding to the stoichiometry of the reactants, calculated from their elemental oxidizing and reducing valences, was varied. In order to modify the redox character of the synthesis medium from the quantity of urea; an excess of urea was used for attaining reducing conditions, while a deficit of urea shifted the medium to oxidizing conditions. Three RV/OV ratios (0.9, 1.0, and 1.1) were selected to elaborate the different binary metal oxide catalysts, nine oxide catalysts were synthesized. Then, the influence of the stoichiometry (RV/OV ratio) on the bulk and surface properties of the binary metal oxide catalysts was investigated. Similarly, the influence of the RV/OV ratio on the CO oxidation activity was discussed and the optimal value of RV/OV ratio was identified. The results show that the increasing of the RV/OV ratio from 0.9 to 1.1, particularly in Ni- and Co-containing catalysts, induces stronger metal-aluminum interactions, in the form of aluminates phases, and that are correlated to the dramatic reduction of the CO oxidation activity. The best physicochemical properties and highest catalytic activities were achieved with the catalysts prepared in redox systems stoichiometrically balanced (RV/OV = 1). The Cu-containing catalysts presented the best catalytic activities in CO oxidation.

16 October 2020 in Materials
Verified
Journal Article
Open access
PDF file
KFKawthar Frikha
Kawthar Frikha
Lionel LimousyLionel Limousy
Lionel Limousy
JBJamel Bouaziz
Jamel Bouaziz
KCKamel CHAARI
Kamel CHAARI
Simona BENNICISimona BENNICI
Simona BENNICI
Ni−Co−Al, Ni−Cu−Al and Co−Cu−Al ternary oxide catalysts, with a fixed 5 wt% transition metal loading, were prepared by the microwave-assisted solution combustion method and tested in CO oxidation. The bulk and surface properties of the catalysts were investigated, using XRD, N2 adsorption–desorption, SEM, XPS and TEM techniques. XRD, XPS and TEM results revealed that nickel and cobalt were present as spinels on the surface and in the bulk. Differently, copper was preferentially present in “bulk-like” CuO-segregated phases. No interaction between the couples of transition metal species was detected, and the introduction of Cu-containing precursors into the Ni−Al or Co−Al combustion systems was not effective in preventing the formation of NiAl2O4 and CoAl2O4 spinels in the Ni− or Co-containing catalysts. Copper-containing catalysts were the most active, indicating that copper oxides are the effective active species for improving the CO oxidation activity.

19 March 2019 in Materials
Verified
Journal Article
Open access
PDF file
KFKawthar Frikha
Kawthar Frikha
Lionel LimousyLionel Limousy
Lionel Limousy
JBJamel Bouaziz
Jamel Bouaziz
KCKamel CHAARI
Kamel CHAARI
LJLudovic Josien
Ludovic Josien
Simona BENNICISimona BENNICI
Simona BENNICI
Three different alumina-based Ni, Cu, Co oxide catalysts with metal loading of 10 wt %, and labeled 10Ni–Al, 10Co–Al and 10Cu–Al, were prepared by microwave-assisted solution combustion. Their morphological, structural and surface properties were deeply investigated by complementary physico-chemical techniques. Finally, the three materials were tested in CO oxidation used as test reaction for comparing their catalytic performance. The 10Cu–Al catalyst was constituted of copper oxide phase, while the 10Ni–Al and 10Co–Al catalysts showed the presence of “spinels” phases on the surface. The well-crystallized copper oxide phase in the 10Cu–Al catalyst, obtained by microwave synthesis, allowed for obtaining very high catalytic activity. With a CO conversion of 100% at 225 °C, the copper containing catalyst showed a much higher activity than that usually measured for catalytic materials of similar composition, thus representing a promising alternative for oxidation processes.