Bonded composite structures are a special type of sandwich-like structures in which multiple carbon-fibre laminates are bonded with adhesives, and debonding can appear at the bond layer due to variable loading and uncertain operating conditions. This study aims to investigate the debonding effects on Lamb wave propagation in a bonded composite structure under variable ambient temperature conditions. In the process, a combined theoretical analysis, time-domain spectral element simulation and experimental analysis of elastic wave propagation in a carbon-fibre reinforced adhesively-bonded composite structure have been carried out. It is shown that theoretical analysis and spectral formulation are effectively able to capture the behaviour of Lamb modes in the healthy structure due to variations in ambient temperature. It is found that the primary anti-symmetric Lamb wave mode amplitude and velocity decrease with an increase in ambient temperature. Furthermore, the spectral formulation accurately captures the effects of debonding on the Lamb wave signals under variable temperature conditions that are consistent with the experimental results. Finally, temperature correction factors are proposed for the primary anti-symmetric mode velocity and amplitude difference calculations and the effectiveness of the factors is successfully verified for selected study cases.

Recent advancements in fiber optic methods have enabled their use for guided wave sensing. It opens up new possibilities for Structural Health Monitoring. The aim of this paper is to provide insight for the physics related to guided wave propagation and coupling between the optical fiber and solid structure. For this purpose, a new approach for non-matching interface based on Lagrange multipliers and the time domain spectral element method was developed. A parallelized code has been implemented in order to simulate the guided wave propagation in the structure, its coupling into the optical fiber and the propagation in the fiber in a computationally efficient way. The paper presents four studies showing the efficacy of the modeling approach. The paper first shows the improvement in the computation speed through the use of parallelization and a more efficient implementation. Then the results of the simulation of wave propagation in the fiber are compared with results from previous simulation studies using commercially available software. The third study shows that the spectral element method is able to capture the directional sensitivity of optical fiber based sensors. Lastly, the simulation is used for detection of simulated damage using the spectral element method based simulation. The results indicate that indeed the spectral element implementation is able to recreate the wave coupling phenomena, capture the physics of the system including directional sensitivity and reflections from damage.

Parallel implementation of the spectral element method is developed in which flat shell spectral elements are utilized for spatial domain representation. The implementation is realised by using Matlab Parallel Computing Toolbox and optimized for Graphics Processing Unit (GPU) computation. In this way, considerable computation speed-up can be achieved in comparison to computation on conventional processors. The implementation includes an interpolation of wavefield on a uniform grid. The method was tested on experimental data set available on the Open Guided Waves platform. The qualitative comparison was performed on full wavefield data, whereas quantitative comparison was made directly on signals of propagating Lamb waves registered by piezoelectric transducers. In both cases, good agreement between numerical and experimental results was achieved. The proposed method is particularly useful for structural health monitoring algorithms in which signal parameters are required such as wave velocity dependence on the angle of propagation. Moreover, it enables model–assisted damage size estimation in which the damage influence curve is estimated based on large numerical data sets and sparse experimental data. Due to relatively short computation times, large data sets can be generated and used for machine learning or other soft computing methods opening up new possibilities in health monitoring of metallic and composite structures.

This paper presents ultrasonic guided wave (UGW) propagation-based nondestructive testing (NDT) of an adhesively bonded composite structure (ACS). In the process, a series of scanning laser Doppler vibrometry (SLDV)-based laboratory experiments and time-domain spectral element method (SEM)-based numerical simulations were carried out on an ACS with barely visible impact damage (BVID) and a hole. A good agreement was observed between the numerical and experimental UGW signals in the cases studied. Finally, a full-field and elliptical signal processing method-based NDT strategy was proposed that uses differential damage features of the registered UGW signals to identify different types of BVIDs in the ACS.

Glass fiber-reinforced polymer structures (GFRPS) are widely used in civil and mechanical fields due to their light weight and corrosion resistance. However, these structures are prone to damage with very-low-energy impacts. The reliability of such structures is of prime importance before their installation and usage. This study aimed to identify, visualize, localize, and verify multiple barely visible impact damage (BVID) in a GFRPS using a combination of guided waves (GW)-based online structural health monitoring (SHM) and thermal strain-based nondestructive testing (NDT) approaches. Global NDT techniques like the use of a laser Doppler vibrometer (LDV) and digital image correlation (DIC) were used in the experimental analysis. The effectiveness of the experimental LDV-GW process was also checked numerically with the spectral element method (SEM). A threshold-based baseline free SHM approach to effectively localize the damages was proposed along with quick DIC verification of composite structure with thermal loading based on short-pulse heating as an excitation source. This study analyzed combined experimental- and numerical-based SHM-NDT methods in characterizing the multiple BVIDs located in a GFRPS.