Kaleeswaran BALASUBRAMANIAM

Dr. Kaleeswaran BALASUBRAMANIAM

IMP PAN
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 April 2019 in Sensors
Verified
Journal Article
Open access
PDF file
Rohan SomanRohan Soman
Rohan Soman
Paweł KudelaPaweł Kudela
Paweł Kudela
Kaleeswaran BALASUBRAMANIAMKaleeswaran BALASUBRAMANIAM
Kaleeswaran BALASUBRAMANIAM
SSShishir Singh
Shishir Singh
PMPawel Malinowski
Pawel Malinowski
Guided waves (GW) allow fast inspection of a large area and hence have attracted research interest from the structural health monitoring (SHM) community. Thus, GW-based SHM is ideal for thin structures such as plates, pipes, etc., and is finding applications in several fields like aerospace, automotive, wind energy, etc. The GW propagate along the surface of the sample and get reflected from discontinuities in the structure in the form of boundaries and damage. Through proper signal processing of the reflected waves based on their time of arrival, the damage can be detected and isolated. For complex structures, a higher number of sensors may be required, which increases the cost of the equipment, as well as the mass. Thus, there is an effort to reduce the number of sensors without compromising the quality of the monitoring achieved. It is of utmost importance that the entire structure can be investigated. Hence, it is necessary to optimize the locations of the sensors in order to maximize the coverage while limiting the number of sensors used. A genetic algorithm (GA)-based optimization strategy was proposed by the authors for use in a simple aluminum plate. This paper extends the optimization methodology for other shape plates and presents experimental, analytical, and numerical studies. The sensitivity studies have been carried out by changing the relative weights of the application demands and presented in the form of a Pareto front. The Pareto front allows comparison of the relative importance of the different application demands, and an appropriate choice can be made based on the information provided.

3 February 2023 in Smart Materials and Structures
Verified
Journal Article
Open access
Kaleeswaran BALASUBRAMANIAMKaleeswaran BALASUBRAMANIAM
Kaleeswaran BALASUBRAMANIAM
SHIRSENDU Shirsendu SIKDARSHIRSENDU Shirsendu SIKDAR
SHIRSENDU Shirsendu SIKDAR
Dominika ZiajaDominika Ziaja
Dominika Ziaja
Michał JurekMichał Jurek
Michał Jurek
Rohan SomanRohan Soman
Rohan Soman
PMPawel Malinowski
Pawel Malinowski
The paper emphasizes an effective quantification of hidden damage in composite structures using ultrasonic guided wave (GW) propagation-based structural health monitoring (SHM) and an artificial neural network (ANN) based active infrared thermography (IRT) analysis. In recent years, there has been increased interest in using a global-local approach for damage localization purposes. The global approach is mainly used in identifying the damage, while the local approach is quantifying. This paper presents a proof-of-study to use such a global-local approach in damage localization and quantification. The main novelties in this paper are the implementation of an improved SHM GW algorithm to localize the damages, a new pixel-based confusion matrix to quantify the size of the damage threshold, and a newly developed IRT-ANN algorithm to validate the damage quantification. From the SHM methodology, it is realized that only three sensors are sufficient to localize the damage, and an ANN- IRT imaging algorithm with only five hidden neurons in quantifying the damage. The robust SHM methods effectively identified, localized, and quantified the different damage dimensions against the non-destructive testing-IRT method in different composite structures.

14 October 2020 in Sensors
Verified
Journal Article
Open access
PDF file
Rohan SomanRohan Soman
Rohan Soman
Kaleeswaran BALASUBRAMANIAMKaleeswaran BALASUBRAMANIAM
Kaleeswaran BALASUBRAMANIAM
AGAli Golestani
Ali Golestani
MKMichał Karpiński
Michał Karpiński
PMPawel Malinowski
Pawel Malinowski
Structural health monitoring (SHM) systems help in reducing maintenance cost and avoiding catastrophic failure of the structure. As a result, they have been a focus of research for the past few decades. Ideally, the methods employed should be low cost and able to detect and localize small levels of damage reliably and accurately. This paper describes a guided waves (GW) based two-step technique for damage detection and localization using fiber Bragg grating (FBG) sensors. The FBG sensors offer benefits such as the ability to be embedded and multiplexed as well as being lightweight and insensitive to electric and magnetic fields, and they have long been seen as a promising solution for the GW measurements in structures. Unfortunately, in the conventional wavelength-based interrogation they have very low signal to noise ratio and as a result low sensitivity. Therefore, the FBG sensor is incorporated in the edge filtering configuration. The major challenges in the use of FBG sensors for GW-based detection are their directional sensitivity and passive nature. The passive nature leads to the reduction in the available actuator–sensor (AS) pairs while the directionality makes the signal processing a challenge. The proposed two-step methodology overcomes these shortcomings of FBG sensors. In the first step the amplitude weighted elliptical approach is used to identify the hotspots due to the inadequate number of AS pairs, the elliptical approach is not sufficient for damage localization. Therefore, in order to further localize the damage the edge reflection based ray-tracing approach is implemented in the second step. Through the two step method, the damage is accurately located. The paper provides the proof of concept of the proposed methodology on an aluminum plate with simulated damage. The results indicate, that indeed the two-step methodology allows accurate damage localization and overcomes the possibility of false detections.

15 January 2021 in Signals
Verified
Journal Article
Open access
PDF file
Kaleeswaran BALASUBRAMANIAMKaleeswaran BALASUBRAMANIAM
Kaleeswaran BALASUBRAMANIAM
SHIRSENDU Shirsendu SIKDARSHIRSENDU Shirsendu SIKDAR
SHIRSENDU Shirsendu SIKDAR
PFPiotr Fiborek
Piotr Fiborek
PMPawel Malinowski
Pawel Malinowski
This paper presents ultrasonic guided wave (UGW) propagation-based nondestructive testing (NDT) of an adhesively bonded composite structure (ACS). In the process, a series of scanning laser Doppler vibrometry (SLDV)-based laboratory experiments and time-domain spectral element method (SEM)-based numerical simulations were carried out on an ACS with barely visible impact damage (BVID) and a hole. A good agreement was observed between the numerical and experimental UGW signals in the cases studied. Finally, a full-field and elliptical signal processing method-based NDT strategy was proposed that uses differential damage features of the registered UGW signals to identify different types of BVIDs in the ACS.

30 November 2021 in Smart Materials and Structures
Verified
Journal Article
Open access
Kaleeswaran BALASUBRAMANIAMKaleeswaran BALASUBRAMANIAM
Kaleeswaran BALASUBRAMANIAM
SHIRSENDU Shirsendu SIKDARSHIRSENDU Shirsendu SIKDAR
SHIRSENDU Shirsendu SIKDAR
TWTomasz Wandowski
Tomasz Wandowski
PMPawel Malinowski
Pawel Malinowski
This paper presents a robust assessment of debond in a glass fibre-reinforced polymer composite structure with L-stiffener attachment. Towards this, the ultrasonic guided wave (GW) propagation based laboratory experiments have been carried out on a stiffened composite panel with piezoelectric transducers for the excitation of GWs and a scanning laser Doppler vibrometer for sensing the GW propagation. To study the changes caused by the stiffener and debond a signal processing based multi-point analysis has been carried out. The proposed methodology consists of two steps. Step 1 using the full wavefield root mean square energy map-based approach to check the presence of debond. Step 2 using point-wise measurements to study debond localization and size estimation using a baseline free signal coefficient difference algorithm (SCDA). The proposed processing approaches are applied for an in-depth analysis of the experimental signals that provide information about the interaction of GWs with stiffener and debond. The mentioned approaches take advantage of the asymmetry caused by the damage. For the applied SCDA methodology there is no need for full-wavefield measurements, healthy case measurements, as only a few measurement points can be enough for the assessment of stiffener debond in such structures.

28 November 2021 in Materials
Verified
Journal Article
Open access
PDF file
Kaleeswaran BALASUBRAMANIAMKaleeswaran BALASUBRAMANIAM
Kaleeswaran BALASUBRAMANIAM
Dominika ZiajaDominika Ziaja
Dominika Ziaja
Michał JurekMichał Jurek
Michał Jurek
PFPiotr Fiborek
Piotr Fiborek
PMPawel Malinowski
Pawel Malinowski
Glass fiber-reinforced polymer structures (GFRPS) are widely used in civil and mechanical fields due to their light weight and corrosion resistance. However, these structures are prone to damage with very-low-energy impacts. The reliability of such structures is of prime importance before their installation and usage. This study aimed to identify, visualize, localize, and verify multiple barely visible impact damage (BVID) in a GFRPS using a combination of guided waves (GW)-based online structural health monitoring (SHM) and thermal strain-based nondestructive testing (NDT) approaches. Global NDT techniques like the use of a laser Doppler vibrometer (LDV) and digital image correlation (DIC) were used in the experimental analysis. The effectiveness of the experimental LDV-GW process was also checked numerically with the spectral element method (SEM). A threshold-based baseline free SHM approach to effectively localize the damages was proposed along with quick DIC verification of composite structure with thermal loading based on short-pulse heating as an excitation source. This study analyzed combined experimental- and numerical-based SHM-NDT methods in characterizing the multiple BVIDs located in a GFRPS.