Israel Herrera-Miranda

Dr. Israel Herrera-Miranda

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2020 in Agriculture
Verified
Journal Article
Open access
PDF file
Yousef Abbaspour-GilandehYousef Abbaspour-Gilandeh
Yousef Abbaspour-Gilandeh
MFMasoud Fazeli
Masoud Fazeli
ARAli Roshanianfard
Ali Roshanianfard
José Luis Hernández-HernándezJosé Luis Hernández-Hernández
José Luis Hernández-Hernández
AFAlejandro Fuentes-Penna
Alejandro Fuentes-Penna
IHIsrael Herrera-Miranda
Israel Herrera-Miranda
In this study, the effects of tillage depth, forward speed and soil moisture content during the cultivator operation on the draft force, energy requirement, and soil disturbance were investigated using five types of cultivators. The experiments were performed in the factorial design based on the randomized complete block design (RCBD) with three replications in loamy sand soil. Different soil moisture contents (factor A) from 5 to 16% for dry soils and 17 to 35% for wet soils, forward speed of tractor (factor B) at four levels of 1.16, 1.61, 1.97, and 3.82 km/hand working depth (factor C) at two levels of 10 and 20 cm were selected. The analysis of variance results showed that the main effects on the draft force, energy requirement, and soil disturbance were significant. With increasing the forward speed, working depth, and blade width, the draft force, energy requirement, and soil disturbance significantly increased. As the soil moisture content increased, the amount of draft force decreased. The average maximum draft force and energy requirement are related to the crescent cultivator and the lowest ones to the cultivator with a sweep blade. The maximum amounts of draft force and energy requirement at the speed of 3.82 km/h were 296.702 N and 0.03708 MJ in the dry conditions, respectively. The average maximum draft force and energy requirement are related to the crescent cultivator and the lowest ones to the cultivator with a sweep blade. The average maximum draft force and energy requirement in dry soil at 10–20 cm depth were 313.534 N and 0.039204 MJ, respectively, and the lowest values were 189 N and 0.019512 MJ in wet soil at the depth of 0–10 cm, respectively. The highest mean value of the area obtained from the profiles was 254.62 cm2 related to the dry conditions and forward speed of 3.82 km/h, and the lowest mean value of the area obtained in the wet conditions was 199.6 cm2 at the forward speed of 1.16 km/h. The highest average area obtained from the profiles was observed in the dry conditions for C4 as 434.813 cm2 and the lowest one was 57.94 cm2 in the wet conditions for the cultivator with a chisel blade and L-shaped shank. The highest average area created by cultivators at the 10–20 cm depth in the dry conditions was 332.875 cm2 and the lowest one at the 0–10 cm depth in the wet conditions was 123.55 cm2. The results of this study can help the designers and manufacturers of agricultural machinery to effectively design and manufacture the machinery with optimum draft and energy requirements.

20 April 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZFZargham Fazel-Niari
Zargham Fazel-Niari
ASAmir Hosein Afkari Sayyah
Amir Hosein Afkari Sayyah
Yousef Abbaspour-GilandehYousef Abbaspour-Gilandeh
Yousef Abbaspour-Gilandeh
IHIsrael Herrera-Miranda
Israel Herrera-Miranda
José Luis Hernández-HernándezJosé Luis Hernández-Hernández
José Luis Hernández-Hernández
Mario Hernández HernándezMario Hernández Hernández
Mario Hernández Hernández
To use machine vision technology in visual quality control of cereal seeds, sufficient knowledge is necessary. In this work, the capability of machine visual systems, equipped with industrial digital cameras for the identification and classification of seven-grain groups in wheat seed samples, was studied. Two statistical models and three support vector machines were employed in this study. Through image processing of 21,000 single grains, the shape, colour, and textural features of each grain were determined. Ninety-one features were ranked through the ReliefF method. The shape features were the most prominent, followed by the textural and colour features. Among the five models tested, the highest classification accuracy was obtained using quadratic support vector machine (QSVM) and the first 35 features. In the test run of this model with independent data, the classification accuracy for sound white wheat, small white wheat, broken white wheat, shrunken white wheat, red wheat, barley and rye were, respectively, 98.7, 98, 99.3, 90.7, 99, 100, and 97.3%, with an overall average accuracy of 97.6%. In the context of this study, the machine vision system—comprising an industrial digital camera and quadratic support vector machine or non-linear discriminate analysis method—was identified as a valuable system in the investigation of the visual qualities of wheat seeds.

13 December 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
RPRazieh Pourdarbani
Razieh Pourdarbani
SSsajad sabzi
sajad sabzi
MRMohammad Hossein Rohban
Mohammad Hossein Rohban
José Luis Hernández-HernándezJosé Luis Hernández-Hernández
José Luis Hernández-Hernández
IGIván Gallardo-Bernal
Iván Gallardo-Bernal
Ginés García-MateosGinés García-Mateos
Ginés García-Mateos
Accurately determining the nutritional status of plants can prevent many diseases caused by fertilizer disorders. Leaf analysis is one of the most used methods for this purpose. However, in order to get a more accurate result, disorders must be identified before symptoms appear. Therefore, this study aims to identify leaves with excessive nitrogen using one-dimensional convolutional neural networks (1D-CNN) on a dataset of spectral data using the Keras library. Seeds of cucumber were planted in several pots and, after growing the plants, they were divided into different classes of control (without excess nitrogen), N30% (excess application of nitrogen fertilizer by 30%), N60% (60% overdose), and N90% (90% overdose). Hyperspectral data of the samples in the 400–1100 nm range were captured using a hyperspectral camera. The actual amount of nitrogen for each leaf was measured using the Kjeldahl method. Since there were statistically significant differences between the classes, an individual prediction model was designed for each class based on the 1D-CNN algorithm. The main innovation of the present research resides in the application of separate prediction models for each class, and the design of the proposed 1D-CNN regression model. The results showed that the coefficient of determination and the mean squared error for the classes N30%, N60% and N90% were 0.962, 0.0005; 0.968, 0.0003; and 0.967, 0.0007, respectively. Therefore, the proposed method can be effectively used to detect over-application of nitrogen fertilizers in plants.

6 April 2021 in Agronomy
Verified
Journal Article
Open access
PDF file
abdolmajid moinfarabdolmajid moinfar
abdolmajid moinfar
GSGholamhossein Shahgholi
Gholamhossein Shahgholi
Yousef Abbaspour-GilandehYousef Abbaspour-Gilandeh
Yousef Abbaspour-Gilandeh
IHIsrael Herrera-Miranda
Israel Herrera-Miranda
José Luis Hernández-HernándezJosé Luis Hernández-Hernández
José Luis Hernández-Hernández
MHMiguel Apolonio Herrera-Miranda
Miguel Apolonio Herrera-Miranda
To determine the effect of the tractor driving system type on the soil compaction and soil behavior a series of tests was conducted using Goldoni 240 tractor with a power rate of 30.8 kW and included four similar tires at three different driving systems (4WD, rear-wheel drive (RWD) and front-wheel drive (FWD)). To evaluate these systems’ effects on soil compaction, tests were conducted at three soil moisture contents (10, 15 and 20% d.b.), three tire inflation pressures (170, 200 and 230 kPa), and three tractor speeds (1.26, 3.96 and 6.78 km/h). Soil bulk density was measured at three average depths of 20, 30 and 40 cm. To evaluate soil compaction, cylindrical cores were used and to assess soil behavior during this process, the soil displacement in a three coordinate system was measured using three displacement transducers. It was found that the 4WD system created the least bulk density of 1155 kg/m3, while the FWD system led to the highest density of 1241 kg/m3. Maximum vertical soil compression of 55 mm occurred for the FWD system and it declined to 43 and 36 mm in RWD and 4WD systems, respectively. Soil displacement in the horizontal and lateral directions was larger for the FWD system in comparison to the other systems. With increment of speed and depth soil compaction decreased. Minimum bulk density of 1109 kg/m3 was occurred at velocity of 6.78 Km/h using the 4WD system, also with this system at the depth 40 cm density was 1127 kg/m3. While at velocity of 1.26 Km/h and depth of 20 cm soil density was 1190 kg/m3.

28 July 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MAmassome alibaba
massome alibaba
RPRazieh Pourdarbani
Razieh Pourdarbani
MMMohammad Hasan Khoshgoftar Manesh
Mohammad Hasan Khoshgoftar Manesh
IHIsrael Herrera-Miranda
Israel Herrera-Miranda
IGIván Gallardo-Bernal
Iván Gallardo-Bernal
José Luis Hernández-HernándezJosé Luis Hernández-Hernández
José Luis Hernández-Hernández
Today, as fossil fuels are depleted, renewable energy must be used to meet the needs of human beings. One of the renewable energy sources is undoubtedly the solar–geothermal power plant. In this paper, the conventional and advanced, exergo-environmental and exergo-economic analysis of a geothermal–solar hybrid power plant (SGHPP) based on an organic Rankin cycle (ORC) cycle is investigated. In this regard, at first, a conventional analysis was conducted on a standalone geothermal cycle (first mode), as well as a hybrid solar–geothermal cycle (second mode). The results of exergy destruction for simulating the standalone geothermal cycle showed that the ORC turbine with 1050 kW had the highest exergy destruction that was 38% of the total share of destruction. Then, the ORC condenser with 26% of the total share of exergy destruction was in second place. In the hybrid geothermal–solar cycle, the solar panel had the highest environmental impact and about 56% of the total share of exergy destruction. The ORC turbine had about 9% of all exergy destruction. The results of the advanced analysis of exergy in the standalone geothermal cycle showed that the avoidable exergy destruction of the condenser was the highest. In the hybrid geothermal–solar cycle, the solar panel, steam economizer and steam evaporator were ranked first to third from an avoidable exergy destruction perspective. The avoidable exergo-economic destruction of the evaporator and pump were higher than the other components. The hybrid geothermal–solar cycle, steam economizer, solar pane and steam evaporator were ranked first to third, respectively, and they could be modified. The avoidable exergo-environmental destruction of the ORC turbine and the ORC pump were the highest, respectively. In the hybrid geothermal–solar cycle, steam economizers, solar panel and steam evaporators had the highest avoidable exergy destruction, respectively. For the standalone geothermal cycle, the total endogenous exergy destruction and exogenous exergy destruction was 83.61% and 16.39%. Moreover, from an exergo-economic perspective, 89% of the total destruction rate was endogenous and 11% was exogenous. From an exergo-environmental perspective, 88.73% of the destruction rate was endogenous and 11.27% was exogenous. For the hybrid geothermal–solar cycle, the total endogenous and exogenous exergy destruction was 75.08% and 24.92%, respectively. Moreover, 81.82% of the exergo-economic destruction rate was endogenous and 18.82% was exogenous. From an exergo-environmental perspective, 81.19% of the exergy destruction was endogenous and 18.81% was exogenous.

12 November 2020 in Plants
Verified
Journal Article
Open access
PDF file
RPRazieh Pourdarbani
Razieh Pourdarbani
SSsajad sabzi
sajad sabzi
Mario Hernández HernándezMario Hernández Hernández
Mario Hernández Hernández
José Luis Hernández-HernándezJosé Luis Hernández-Hernández
José Luis Hernández-Hernández
IGIván Gallardo-Bernal
Iván Gallardo-Bernal
IHIsrael Herrera-Miranda
Israel Herrera-Miranda
Non-destructive assessment of the physicochemical properties of food products, especially fruits, makes it possible to examine the internal quality without any damage. This is applicable at different stages of fruit growth, harvesting stage, and storage as well as at the market stage. In this regard, the present study aimed to estimate the total chlorophyll content using three types of data: color data, spectral data, and spectral data related to the most effective wavelengths. The most important steps of the proposed algorithms include extracting spectral and color data from each sample of Fuji cultivar apple, selecting the most effective wavelengths at the range of 660–720 nm using hybrid artificial neural network–particle swarm optimization (ANN-PSO), non-destructive assessment of the chemical property of total chlorophyll content based on color data, and spectral data using hybrid artificial neural network-Imperialist competitive algorithm (ANN-ICA). In order to assess the reliability of the hybrid ANN-ICA, 1000 iterations were performed after selecting the optimal structure of the artificial neural network. According to the results, in the best training mode and using spectral data and the most effective wavelength, total chlorophyll content was predicted with the R2 and RMSE of 0.991 and 0.0035, 0.997 and 0.001, 0.997 and 0.0006, respectively.