Biodiesel is a long-chain fatty acid ester made from renewed and biological raw materials such as used cooking, animal fat, vegetable oil, and algae. Biodiesel is a renewable and clean fuel as it reduces carbon monoxide, carbon dioxide, hydrocarbons, and particulate matter emissions compared with petroleum-based diesel fuel. Production of biodiesel from renewable resources is done through the transesterification reaction at which the organic group (alkyl) of alcohol is substituted with the organic group of a triglyceride– the main component of the feedstock –producing fatty acid alkyl ester (biodiesel) and crude glycerol. Biodiesel can be used in pure form (B100) or may be blended with petroleum diesel at any concentration if its specifications is identical to the international standard specifications provided by American standard for testing materials (ASTM) or EN14214 in the European Union for alternative fuels. In this paper, the different types of biodiesel feedstocks, feedstocks treatment methods, and biodiesel production technologies are reviewed and discussed.

The escalating environmental crisis posed by single-use plastics underscores the urgent need for sustainable alternatives. This study provides an approach to introduce biodegradable polymer blends by blending synthetic polyvinyl alcohol (PVA) with natural polymers—corn starch (CS) and hydroxypropyl methylcellulose (HPMC)—to address this challenge. Through a comprehensive analysis, including of the structure, mechanical strength, water solubility, biodegradability, and thermal properties, we investigated the enhanced performance of PVA-CS and PVA-HPMC blends over conventional polymers. Scanning electron microscopy (SEM) findings of pure PVA and its blends were studied, and we found a complete homogeneity between the PVA and both types of natural polymers in the case of a high concentration of PVA, whereas at lower concentration of PVA, some granules of CS and HMPC appear in the SEM. Blending corn starch (CS) with PVA significantly boosts its biodegradability in soil environments, since adding starch of 50 w/w duplicates the rate of PVA biodegradation. Incorporating hydroxypropyl methylcellulose (HPMC) with PVA not only improves water solubility but also enhances biodegradation rates, as the addition of HPMC increases the biodegradation of pure PVA from 10 to 100% and raises the water solubility from 80 to 100%, highlighting the significant acceleration of the biodegradation process and water solubility caused by HPMC addition, making these blends suitable for a wide range of applications, from packaging and agricultural films to biomedical engineering. The thermal properties of pure PVA and its blends with natural were studied using diffraction scanning calorimetry (DSC). It is found that the glass transition temperature (Tg) increases after adding natural polymers to PVA, referring to an improvement in the molecular weight and intermolecular interactions between blend molecules. Moreover, the amorphous structure of natural polymers makes the melting temperature ™ lessen after adding natural polymer, so the blends require lower temperature to remelt and be recycled again. For the mechanical properties, both types of natural polymer decrease the tensile strength and elongation at break, which overall weakens the mechanical properties of PVA. Our findings offer a promising pathway for the development of environmentally friendly polymers that do not compromise on performance, marking a significant step forward in polymer science’s contribution to sustainability. This work presents detailed experimental and theoretical insights into novel polymerization methods and the utilization of biological strategies for advanced material design.

Approximately 50% of global plastic wastes are produced from plastic packaging, a substantial amount of which is disposed of within a few minutes of its use. Although many plastic types are designed for single use, they are not always disposable. It is now widely acknowledged that the production and disposal of plastics have led to a plethora of negative consequences, including the contamination of both groundwater and soil resources and the deterioration of human health. The undeniable impact of excessive plastic manufacturing and waste generation on the global plastic pollution crisis has been well documented. Therefore, degradable polymers are a crucial solution to the problem of the non-degradation of plastic wastes. The disadvantage of degradable polymers is their high cost, so blending them with natural polymers will reduce the cost of final products and maximize their degradation rate, making degradable polymers competitive with industrial polymers that are currently in use daily. In this work, we will delineate various degradable polymers, including polycaprolactone, starch, and cellulose. Furthermore, we will elucidate several aspects of polyvinyl alcohol (PVA) and its blends with natural polymers to show the effects of adding natural polymers on PVA properties. This paper will study cost-effective and ecologically acceptable polymers by combining inexpensive natural polymers with readily accessible biodegradable polymers such as polyvinyl alcohol (PVA).

Bioethanol-derived biomass is a green sustainable source of energy that is highly recommended as an efficient alternative to the replacement of fossil fuels. However, this type of bioethanol production is always expensive with very low bioethanol concentration. Therefore, this work aims to represent a facile and green approach for bioethanol production with high concentration and purity as well as reasonable cost from corn stover (CS). The goal of this study is to characterize CS and its treated samples with maleic acid (CSM) using various characterization analyses, such as proximate and ultimate analysis, HHV, TGA, FTIR, SEM, and CHNS. The bioethanol production stages: Pretreatment, enzymatic degradation, fermentation, and finally bioethanol separation and purification via the pervaporation process, which have been investigated and optimized are associated with the economic analysis. The optimum operating condition of the pretreatment process was 2% maleic acid, 1:20 solid-to-liquid ratio at 45 psi, 120 °C, and 1 h of operation in the autoclave. This process contributes to 53 and 45% lignin and hemicellulose removal, 98% cellulose recovery, and a glucose yield of 741 mg/dL. The yeast isolate succeeded in the production of 1230 mg/dL of bioethanol. This isolated yeast strain was close to Pichia nakasei with a similarity of 98%, and its amplified 18S rRNA gene sequence was deposited in GenBank with the accession number MZ675535. Poly (MMA-co-MA) membrane was synthesized, characterized, and its efficiency for increasing the bioethanol concentration was evaluated using the integrated pervaporation technique. The techno-economic analysis is presented in detail to evaluate the process profitability, which achieves a considerable profit for the whole duration of the project without any losses as it reaches a net profit of USD 1 million in 2023, reaching USD 2.1 million in 2047 for a company with a capacity of 32 thousand tons per year. The sequential strategy offers a promising approach for efficient bioethanol production under mild and environmentally friendly conditions that enable its implication industrially.