Volatile fatty acids (VFAs) are intermediates in the methane formation pathway of anaerobic digestion and can be produced through the fermentation of organic wastes. VFAs have become an anticipated resource- and cost-effective way to replace fossil resources with higher added value and more versatile fuels and chemicals. However, there are still challenges in the production of targeted compounds from diverse and complex biomasses, such as urban biowastes. In this study, the aim was to modulate the microbial communities through inoculum treatment to enhance the production of green chemicals. Thermal and freeze-thaw treatments were applied to the anaerobic digester inoculum to inhibit the growth of methanogens and to enhance the performance of acidogenic and acetogenic bacteria. VFA fermentation after different inoculum treatments was studied in batch scale using urban biowaste as the substrate and the process performance was assessed with chemical and microbial analyses. Inoculum treatments, especially thermal treatment, were shown to increase VFA yields, which were also correlating with the dynamics of the microbial communities and retention times of the test. There was a strong correlation between VFA production and the relative abundances of the microbial orders Clostridiales (families Ruminococcaceae, Lachnospiraceae and Clostridiaceae), and Lactobacillales. A syntrophic relationship of these taxa with members of the Methanobacteriales order was also presumed.

Due to the increasing demand for low carbon-footprint bioproducts in the markets, innovative processes technologies and products are needed. The objective of this study was to assess the quality and potential of food waste (FW) from the hospitality sector to produce volatile fatty acids (VFAs). A batch type acid fermentation system was used to study VFA production in different process conditions (a decreased pH and increased organic loading rate). The evolution of VFAs and long-chain fatty acids was followed. Amplicon sequencing of the 16S rRNA gene was used to investigate the bacterial and archaeal community, and elucidate microbial communities in different FW and process conditions. The results show that high VFA concentrations (of up to 18 g/L) were achieved in overloaded conditions, which were also affected by the activity and composition of the inoculum. FW played an important role in modulating microbial composition, especially the bacterial communities belonging to the lactic acid bacteria group.

Invasive plant species threaten native species and habitats causing ecologic, economic and social burden. When creating climate friendly solutions by utilizing plant biomasses in biogas and fertilizer production, safety should be ensured concerning the use of residues. This study concentrates on the treatment of biomasses containing invasive plant material by tunnel and windrow composting, and by farm-scale and laboratory-scale anaerobic digestion (AD) in mesophilic conditions. Germination of the nationally settled and harmful invasive species Lupinus polyphyllus Lindl. was investigated after these processes. In addition, the role of the conditions found in the processes that destroyed seeds were studied, such as the time of exposure, temperature and static pressure. Dormant seeds are well protected against harsh conditions and can survive through various stress factors, but also become vulnerable as more factors are combined and time of exposure is extended. Our results suggest that the risks involved for the utilization of harmful invasive species increase with mesophilic temperatures and single treatments if the processing conditions are not stabile. One-month treatment with windrow composting showed a high risk for dormant seeds of L. polyphyllus seeds to survive, whereby extending the processing time reduced it substantially. Hard coated seeds can thus be broken with a combination of thermophilic temperatures, moisture and static pressure.

Increasing demand of fossil-free fuels in the transport sector drives towards using new biomass sources in fuel production. Municipal waste as a substrate is used in many countries in biomethane production, but the amount of waste can cover only a small portion of the fuel used. In Europe, the new renewable energy directive (RED II) was established December 2018 to ensure the sustainability of renewable fuels. The directive includes typical and default greenhouse gas (GHG) emissions for several potential substrates, such as biogas from manure or maize silage, which the biogas plants can use to verify their emissions directly or to calculate their emissions using the methods provided. However, such default value for grass silage as biogas substrate is lacking. We defined the conditions needed to fulfil the sustainability criteria of the directive when producing biomethane for vehicle fuel using grass silage as the feedstock in Finland. The emission reduction targets are not easy to achieve in Finland when using grass cultivated exclusively for energy production. The reduction targets can be achieved, however, if the grass is cultivated due to an improved crop rotation, where the grass is co-digested with manure and/or energy sources with zero emissions for the process can be applied.

In Finland the increasing use of biofuel in transport presupposes a search for new raw material sources for biorefining. The aim of this study was, at the regional level, to compare the procurement costs of logging residues, stumps, delimbed stems and cereal straw for biorefining. The accumulation and procurement costs of forest chips and cereal straw were estimated within a 100-kilometre transporting distance via existing road network from an end-use-facility located in Kouvola in South-East Finland. The analyses were performed as simulated treatments in thinnings of young stands, cereal fields and regeneration fellings using existing productivity and cost functions and yield calculations based on crop statistics, the forest industry stand data and the sample plots data of the National Forest Inventory of Finland. Accumulation of raw material assortments and costs of production stages were defined per dry tonnes. Subsidies and raw material prices were excluded from consideration in the study. The results indicate that recovering logging residues requires lower costs than utilization of stumps, delimbed stems or cereal straw. Cereal straw represents an important source of biomass in Kouvola but the cost competiveness is poor compared the procurement costs of forest chips. When the annual procurement volume of biomass was 50 000 dry tonnes the cost at the plant was 49 € dry tonne and biomass was comprised totally of logging residues. Procurement cost grew to 59 € dry tonne when the annual procurement volume of biomass was doubled to 100 000 dry tonnes. Of that amount, the proportion of logging residues was 58.4%, stumps 24.3% and delimbed stems 17.3%. First cereal straw dry tonnes were delivered to end-use-facility, when procurement cost grew to 60 € dry tonne and annual procurement volume of biomass was 110 000 dry tonnes.–1 –1 –1