The purpose of this paper is investigating the characteristics of dynamic contact and dynamic stiffness of the single nut ball screw pair (SNBSP). Then a new sensorless method is proposed to extract the SNBSP dynamic contact stiffness of a mass production CNC machine tool feed system. First of all, the transformation relationship between each coordinate system of SNBSP is established. Secondly, the dynamic model of all ball–raceway contact pairs is established. Based on this, a dynamic contact stiffness model is established. The dynamic contact parameters are obtained by the numerical method. It is found that the influence of screw speed on screw and nut raceway normal force distribution are opposite. This will affect the variations of dynamic contact stiffness. It is also clear that the effect of axial load on dynamic stiffness is significant. Then, an effective method is proposed to estimate the dynamic contact stiffness of a mass production CNC machine tool feed system without any external sensors. The axial force of feed system is estimated by using torque current of servo motor. Current signals can be obtained through FANUC Open CNC API Specifications (FOCAS) library functions, and then dynamic contact stiffness can be calculated through the stiffness model without external sensors. Finally, a feed system dynamic model is built, and the contact model and sensorless stiffness estimating method are verified by experiments in this dynamic system.
29 October 2020 in International Journal of Sports Medicine
Ageing increases the occurrence and development of many diseases. Exercise is believed to be an effective way to improve ageing and skeletal muscle atrophy. However, many elderly people are unable to engage in active exercise. Whole-body vibration is a passive way of moving that is especially suitable for the elderly and people who find it inconvenient to exercise. Metabolomics is the systematic study of metabolic changes in small molecules. In this study, metabolomics studies were performed to investigate the regulatory effect of whole-body vibration on the skeletal muscles of ageing mice. After 12 weeks, we found that whole-body vibration had the most obvious effect on lipid metabolism pathways (such as linoleic acid, α-linolenic acid metabolism, glycerophospholipid metabolism pathways) in skeletal muscle of ageing mice. Through further research we found that whole-body vibration decreased the levels of triglycerides, total cholesterol, low-density lipoprotein cholesterol and very low-density lipoprotein in blood; decreased the lipid deposition in skeletal muscle; decreased the protein expression of monocyte chemoattractant protein-1 and interleukin-6; improved the protein levels of phosphorylated insulin receptor substrate-1, phosphate phosphoinositide 3-kinase and p-AKT; improved the protein levels of klotho; and decreased the protein expression of p53. These findings reveal that whole-body vibration might postpone senility by attenuating lipid deposition and reducing chronic inflammation and the insulin resistance of skeletal muscle.
1 September 2019 in Transactions of the Canadian Society for Mechanical Engineering
This paper aims to investigate the load distribution and contact stiffness characteristics of the single-nut ball screw pair (SNBSP). First, the transformed relationship of coordinate systems is established. Then, the whole rolling elements load distribution model of the SNBSP is presented. Based on this, the whole rolling elements contact stiffness model is obtained. Applying the Newton–Raphson iterative method to solve the model, the normal force of rolling elements and the contact angles between balls and raceway surface are determined. The calculation results are reasonably consistent with those of the half pitch model. Then, the local contact stiffness and global contact stiffness are obtained. Furthermore, the effects of axial load and structural parameters of the SNBSP on the normal contact force, contact angle, and local and global contact stiffness are discussed using numeric analysis. Finally, a dynamic model of the z-axis feed system with time-varying axial stiffness is established, and the accuracy of the model is verified by experiments.
In view of the time-varying complexity of the heat source for the ball screw feed system, this paper proposes an adaptive inverse problem-solving method to estimate the time-varying heat source and temperature field of the feed system under working conditions. The feed system includes multiple heat sources, and the rapid change of the moving heat source increases the difficulty of its identification. This paper attempts to develop a numerical calculation method for identifying the heat source by combining the experiment with the optimization algorithm. Firstly, based on the theory of heat transfer, a new dynamic thermal network model was proposed. The temperature data signal and the position signal of the moving nut captured by the sensors are used as input to optimize the solution of the time-varying heat source. Then, based on the data obtained from the experiment, finite element software parametric programming was used to optimize the estimate of the heat source, and the results of the two heat source prediction methods are compared and verified. The other measured temperature points obtained by the experiment were used to compare and verify the inverse method of this numerical calculation, which illustrates the reliability and advantages of the dynamic thermal network combined with the genetic algorithm for the inverse method. The method based on the on-line monitoring of temperature sensors proposed in this paper has a strong application value for heat source and temperature field estimation of complex mechanical structures.
In this study, a novel sensorless method is developed to estimate the friction in a ball screw system using asynchronous experimental data for a worktable position (WP) and the servo motor torque current (SMTC), which is collected by the FOCAS library functions from a FANUC digital control system. The corresponding time stamps are retrieved by a high-resolution performance counter in Windows. The fluctuations in friction over the whole travel distance of the worktable (WTDOW) are analyzed using a piecewise polynomial fitting algorithm to extract the instantaneous average friction value (IAFV) and the friction fluctuating signal (FFS). The IAFVs can describe the effect of the WP and the pitch errors of the shaft on the friction. The FFT results of the FFS show that the friction depends on the rolling tool, the pitch of the shaft and the refeeding of the balls in the ball screw and linear ball rail guides. The experimental results show that the estimated friction can capture the characteristic spectra of the FFS. The effects of the feed velocity and direction, the effects of the WP on the IAFV, and the frequencies and amplitudes of the significant FFT components are discussed. The nonuniform pitch errors of the shaft impact the repeatability of the IAFVs at a given WP. The variations in the mean value of the IAFVs with the feed velocity for tests at a fixed WP show nonconventional Stribeck behavior. These results also demonstrate that the friction force varies with the WP, which is not captured by Stribeck characteristics. This study provides an effective method to evaluate the performance of a ball screw system and to predict the friction in that system without the use of sensors.