Cold ironing refers to the usage of less polluting power supply sources to deliver electricity to the moored ship. Such a shore-to-ship system is used when the ship is at a port so the auxiliary combustion engines may be turned off. This paper presents the numerical simulation results of a medium voltage cold-ironing system with regard to the currents flowing between the ship’s hull and grounding busbar. The IT electrical inland system with a neutral grounding resistor, as commonly used in shore-to-ship systems, is investigated. Parasitic capacitances present between the phase-to-hull and phase-to-ground in real-world applications can vary from each other. The direct and alternating currents flowing across the hull, seawater and the pier structure are amongst the causes that can lead to premature reinforced concrete degradation. Chosen cases of phase-to-ground or hull unequal capacitances influencing AC stray currents were considered.
The development of environmentally friendly technologies, including additive technologies, contributes to the formation of sustainable production in city multifloor manufacturing clusters (CMFMCs). This paper discusses an approach to the implementation of energy-intensive technological processes in such clusters using examples of the manufacturing of ceramic and metal–ceramic products. The manufacturing of ceramic and metal–ceramic products in high-temperature furnaces is associated with an increased electricity consumption. The use of modern ceramic micro- and nanopowders makes it possible to switch to more energy-saving technologies by reducing the sintering temperature and shortening the technological cycle. This requires the use of additional activating and inhibiting additives in the initial powder mixtures to obtain products with the necessary physical and mechanical properties. The purpose of this paper is to present a model and indicators to assess the energy efficiency of the choice of sintering technology of foam ceramic filters for smart sustainable production management within CMFMCs. The use of the proposed indicators for assessing the energy efficiency of sintering foam ceramic filters makes it possible to improve the technological process and reduce the completion time of its thermal cycle by 19%, and reduce the maximum heating temperature by 20% to 1350 °C. The adoption of a different oxide technological alternative and the use of the proposed model and indicators to assess the energy efficiency of the sintering technology of foam ceramic filters allows to choose less energy-intensive equipment and save up to 40% in electricity. The proposed model to assess the energy efficiency of the sintering technology of foam ceramic filters can be used to control their production under the power consumption limitations within the CMFMCs.
The aim of the study is to identify and determine the role of microbial degradation taking place in dusty deposits in potential threats (i.e., destruction of protective coatings and development of corrosion) to the means of transport in conditions of transshipment of energy biomass. This paper presents the results of research on the impact of powdery fractions of wood biomass and biomass obtained from oil plants in the degradation of paint coatings and corrosion processes. During the research, exposure to simulated port climate, OM, SEM, and EDS studies were used. It has been found that the presence of the fraction containing protein compounds and amino acids (e.g., dust of rapeseed meal) stimulates the growth of microorganisms whose metabolism products favour the destruction of protective coatings and the development of corrosion. Under the same conditions, the destruction of protective zinc coatings has been observed. It was found that already 14 days of exposure to oily biomass deposits results in damage to paint coatings caused by microbiological processes. The 8-week exposure causes serious degradation of protective coatings and the base material itself. The biomass of wood origin, containing compounds of the tannin type, did not show as much aggressive activity as the biomass with protein compounds.
Using the specially designed ultrasonic cavitation facility enabling to measure the hydrogen permeation, the experimental evidence have been provided for hydrogen to ingress in the metal subjected to cavitation in the 3% NaCl solution under the open circuit conditions. Increase in the vibration amplitude resulted in the increase in amplitude of the electrochemical voltage and current pulses and in the hydrogen permeation rate, as well. The cavitation induced modification of hydrogen transport through the membrane has been stated on the base of different appearance of the hydrogen permeation transients at cavitation in comparison with those recorded for the unstressed membrane. The hydrogen behavior has been affected by the cavitation induced dynamic stresses, metal hardening and stress relaxation due to microcracking of the metal.