In this paper, an end-fire antenna for 28 GHz broadband communications is proposed with its multiple-input-multiple-output (MIMO) configuration for pattern diversity applications in 5G communication systems and the Internet of Things (IoT). The antenna comprises a simple geometrical structure inspired by a conventional planar helical antenna without utilizing any vias. The presented antenna is printed on both sides of a very thin high-frequency substrate (Rogers RO4003, ${\epsilon }_{\mathrm{r}} =$ 3.38) with a thickness of 0.203 mm. Moreover, its MIMO configuration is characterized by reasonable gain, high isolation, good envelope correlation coefficient, broad bandwidth, and high diversity gain. To verify the performance of the proposed antenna, it was fabricated and verified by experimental measurements. Notably, the antenna offers a wide −10 dB measured impedance ranging from 26.25 GHz to 30.14 GHz, covering the frequency band allocated for 5G communication systems with a measured peak gain of 5.83 dB. Furthermore, a performance comparison with the state-of-the-art mm-wave end-fire antennas in terms of operational bandwidth, electrical size, and various MIMO performance parameters shows the worth of the proposed work.

This paper presents a dual-band 28/38 GHz two elements multiple-input multiple-output (MIMO) antenna with high isolation for 5G applications. The suggested antenna is a monopole with rectangular and triangle stubs added to the patch and a partial ground plane to achieve the dual band’s behavior. Two elements of the suggested antenna are combined and placed orthogonally to achieve the high isolation features of the MIMO configuration at 28/38 GHz. The MIMO configuration has a size of 27.65 $$\times$$× 12 $$\times$$× 0.273 mm³. The suggested MIMO prototype is fabricated and tested. The tested results achieved dual frequency bands with S₁₁ lower than − 10 dB within two frequency bands (26–30 GHz and 36–41.5 GHz) and S₂₁ lower than − 20 dB through the two operated bands. The suggested antenna has semi-omnidirectional radiation patterns in both planes. As well, its measured peak gain is 5.2 dBi and 5.3 dBi at the two operated frequency bands, respectively. Also, the MIMO parameters are extracted to validate the simulated results. The simulated and tested results have a good matching within the two operating bands which suggests the proposed structure be utilized in 5G communications.

This paper presents a compact and simple reconfigurable antenna with wide-band, dual-band, and single-band operating modes. Initially, a co-planar waveguide-fed triangular monopole antenna is obtained with a wide operational frequency band ranging from 4.0 GHz to 7.8 GHz. Then, two additional stubs are connected to the triangular monopole through two p-i-n diodes. By electrically switching these p-i-n diodes ON and OFF, different operating frequency bands can be attained. When turning ON only one diode, the antenna offers dual-band operations of 3.3–4.2 GHz and 5.8–7.2 GHz. Meanwhile, the antenna with single-band operation from 3.3 GHz to 4.2 GHz can be realized when both of the p-i-n diodes are switched to ON states. The proposed compact size antenna with dimensions of 0.27λ₀ × 0.16λ₀ × 0.017λ₀ at the lower operating frequency (3.3 GHz) can be used for several wireless applications such as worldwide interoperability for microwave access (WiMAX), wireless access in the vehicular environment (WAVE), and wireless local area network (WLAN). A comparative analysis with state-of-the-art works exhibits that the presented design possesses advantages of compact size and multiple operating modes.

In this paper, a 38 GHz 4-port multiple-input multiple-output (MIMO) antenna with considerable isolation and gain enhancement for 5G applications is introduced. The suggested antenna element is a monopole antenna composed of a circular patch with a rectangular slot etched from it and a partial ground plane is used to extend the desired frequency to operate from 36.6 GHz to 39.5 GHz with a center frequency of 38 GHz. The high isolation is achieved by arranging the four elements orthogonally and adding four stubs to reduce mutual coupling between elements at the desired frequency bands. The gain improvement is also introduced by placing a frequency selective structure (FSS) which is designed at the same frequency bands of the antenna under the suggested MIMO antenna to act as a reflector. The proposed four-element MIMO with the FSS prototype is built and tested in order to confirm the simulated results. The suggested antenna operated from 37.2 GHz to 39.2 GHz with an isolation of less than 25 dB across the obtained frequency range. The peak gain of the antenna is enhanced from 5.5 dBi to around 10 dBi by utilizing the FSS structure; furthermore, the back radiation is enhanced. The MIMO performance is validated by extracting its parameters and comparing with the simulated results. The results extracted from the simulation and the measurement show satisfactory matching along with the target band, indicating that the proposed structure could be used for 5G communications.