We present a 4-port Multiple-Input-Multiple-Output (MIMO) antenna array operating in the mm-wave band for 5G applications. An identical two-element array excited by the feed network based on a T-junction power combiner/divider is introduced in the reported paper. The array elements are rectangular-shaped slotted patch antennas, while the ground plane is made defected with rectangular, circular, and a zigzag-shaped slotted structure to enhance the radiation characteristics of the antenna. To validate the performance, the MIMO structure is fabricated and measured. The simulated and measured results are in good coherence. The proposed structure can operate in a 25.5–29.6 GHz frequency band supporting the impending mm-wave 5G applications. Moreover, the peak gain attained for the operating frequency band is 8.3 dBi. Additionally, to obtain high isolation between antenna elements, the polarization diversity is employed between the adjacent radiators, resulting in a low Envelope Correlation Coefficient (ECC). Other MIMO performance metrics such as the Channel Capacity Loss (CCL), Mean Effective Gain (MEG), and Diversity gain (DG) of the proposed structure are analyzed, and the results indicate the suitability of the design as a potential contender for imminent mm-wave 5G MIMO applications.

This work presents a 4-element multiple-input multiple-output (MIMO) antenna with a single layered metasurface array for fifth generation (5G) millimeter-Wave (mm-Wave) communication systems. Each MIMO antenna element is composed of a 1×2 array with a corporate feed network. Moreover, a metasurface array structure consisting of 9×6 Circular Split Ring (CSR) shaped cells is employed to improve the gain and isolation between the MIMO antenna elements. The proposed antenna system is realized using 0.787 mm thick Rogers RT Duroid 5880 substrate. The performance of the antenna is investigated in terms of s-parameters, radiation characteristics, and MIMO parameters. The antenna operates at the mm-Wave frequency band ranging from 24.55 to 26.5 GHz. The incorporation of the metasurface layer enhanced the gain thus attaining a peak measured gain of 10.27 dBi. Additionally, isolation is also improved by 5dB after the employment of metasurface. The investigation of MIMO performance metrics such as Envelope Correlation Coefficient (ECC), Diversity Gain (DG), Channel Capacity Loss (CCL), and Mean Effective Gain (MEG) exhibits good antenna characteristics. The demonstrated radiation properties of the proposed antenna ascertain its suitability for the forthcoming 5G communication systems.

This work demonstrates an integrated multiple-input multiple-output (MIMO) antenna solution for Long Term Evolution (LTE) and Millimeter-Wave (mm-wave) 5G wireless communication services. The proposed structure is comprised of a two-element LTE MIMO antenna, and a four-element 5G MIMO configuration with rectangular and circular defects in the ground plane. For experimental validation, the proposed structure is fabricated on a Rogers RO4350B substrate with 0.76 mm thickness. The overall substrate dimensions are 75 mm × 110 mm. The proposed structure is capable of operating at 5.29–6.12 GHz (LTE 46 and 47 bands) and 26–29.5 GHz (5G mm-wave) frequency bands. Additionally, the measured peak gain of 5.13 and 9.53 dB is attained respectively for the microwave and mm-wave antennas. Furthermore, the analysis of the MIMO performance metrics demonstrates good characteristics, and excellent field correlation performance across the operating bands. Furthermore, the analysis of the Specific Absorption Rate (SAR) and Power Density (PD) at the lower frequency band (5.9 GHz) and PD only at mm-Wave frequency band (28 GHz) verifies that the proposed antenna system satisfies the international human safety standards. Therefore, the proposed integrated MIMO antenna configuration ascertains to be a potential contender for the forthcoming communication applications.

The work in this article presents the design and realization of a low-profile, four-port MIMO antenna supporting fifth-generation (5G) wireless applications operating at a millimeter-Wave (mm-Wave) band. Each MIMO antenna is a 2-element array fed with a corporate feeding network, whereas the single antenna is a patch with a bow-tie slot at the center and slits at the edges. The vertical and horizontal slots are incorporated as a Defected Ground Structure (DGS) to optimize the antenna performance. In addition, a slotted zig-zag decoupling structure is etched from edge to edge on the top side to enhance the isolation. Significant isolation (>−40 dB) is achieved between antenna elements by employing spatial and polarization diversity techniques. The proposed antenna covers the 5G mm-Wave band with a −10 dB bandwidth ranging from 27.6–28.6 GHz, whereas the maximum gain attained for the proposed structure is 12.02 dBi. Moreover, the lower correlation values, higher diversity gain, and lower channel capacity loss make it a suitable contender for 5G MIMO applications at the mm-Wave range.

This paper presents a compact and simple reconfigurable antenna with wide-band, dual-band, and single-band operating modes. Initially, a co-planar waveguide-fed triangular monopole antenna is obtained with a wide operational frequency band ranging from 4.0 GHz to 7.8 GHz. Then, two additional stubs are connected to the triangular monopole through two p-i-n diodes. By electrically switching these p-i-n diodes ON and OFF, different operating frequency bands can be attained. When turning ON only one diode, the antenna offers dual-band operations of 3.3–4.2 GHz and 5.8–7.2 GHz. Meanwhile, the antenna with single-band operation from 3.3 GHz to 4.2 GHz can be realized when both of the p-i-n diodes are switched to ON states. The proposed compact size antenna with dimensions of 0.27λ₀ × 0.16λ₀ × 0.017λ₀ at the lower operating frequency (3.3 GHz) can be used for several wireless applications such as worldwide interoperability for microwave access (WiMAX), wireless access in the vehicular environment (WAVE), and wireless local area network (WLAN). A comparative analysis with state-of-the-art works exhibits that the presented design possesses advantages of compact size and multiple operating modes.

This paper presents a compact frequency reconfigurable antenna for flexible devices and conformal surfaces. The antenna consists of a simple easy to fabricate structure consisting of a stub loaded circular radiator, designed on commercially available RT5880 flexible substrate (εr = 2.2) with a thickness of 0.254 mm. The combination of stub loading and slot etching techniques are utilized to achieve the advantages of compactness, frequency reconfigurability, wide impedance bandwidth, and stable radiation pattern with structural conformability. The frequency reconfigurability is achieved by employing two p-i-n diodes. Simulated and experimental results showed that the antenna operates in various important commercial bands, such as S-band (2 GHz– 4 GHz), Wi-Max (3.5 GHz and 5.8 GHz), Wi-Fi (3.6 GHz, 5 GHz, and 5.9 GHz), 5G sub-6-GHz (3.5 GHz and 4.4 GHz – 5 GHz), and ITU-band (7.725 GHz – 8.5 GHz) with the additional advantages of structural conformability. Furthermore, the performance comparison of the proposed flexible antenna with the state-of-the-art flexible antennas in terms of compactness, frequency reconfigurability, and number of operating bands demonstrates the novelty of the proposed antenna and its potential application in heterogeneous applications.