TEM and SEM investigations of ZnO bicrystal interfaces were undertaken with an aim to study the correlation of local grain‐boundary structure, segregation and electrical transport perpendicular to the interface. To this end, varistor‐like ZnO bicrystals with piezotronic characteristics were chosen with (0001̅)║(0001̅) tail‐to‐tail orientation with respect to the c‐axis. In order to contrast different local grain‐boundary structures with different coherency and segregation of bismuth, but identical macroscopic polarization state, two complementary processing techniques were applied. A diffusion‐bonded bicrystal with an intermediate thin film containing Zn‐Bi‐Co‐O provided a straight interface as reference. In contrast, a ZnO bicrystal prepared by epitaxial solid‐state transformation was manufactured by bonding two ZnO single crystals with a 100 µm thick polycrystalline ZnO varistor material with a typical dopant composition including bismuth and cobalt. This structure was annealed to the point that a bicrystal was formed with the varistor concentration at the boundary, which was strongly curved due to the polycrystalline microstructure still providing a shadow image at the interface. The results highlight a distinct correlation between local interfacial morphology, degree of segregation of bismuth and degree of nonlinearity of the electrical transport across the interface.
The implementation of thermal barriers in thermoelectric materials improves their power conversion rates effectively. For this purpose, material boundaries are utilized and manipulated to affect phonon transmissivity. Specifically, interface intermixing and topography represents a useful but complex parameter for thermal transport modification. This study investigates epitaxial thin film multilayers, so called superlattices (SL), of TiNiSn/HfNiSn, both with pristine and purposefully deteriorated interfaces. High-resolution transmission electron microscopy and X-ray diffractometry are used to characterize their structural properties in detail. A differential 3 -method probes their thermal resistivity. The thermal resistivity reaches a maximum for an intermediate interface quality and decreases again for higher boundary layer intermixing. For boundaries with the lowest interface quality, the interface thermal resistance is reduced by 23% compared to a pristine SL. While an uptake of diffuse scattering likely explains the initial deterioration of thermal transport, we propose a phonon bridge interpretation for the lowered thermal resistivity of the interfaces beyond a critical intermixing. In this picture, the locally reduced acoustic contrast of the less defined boundary acts as a mediator that promotes phonon transition.
5 March 2021 in Zeitschrift für Kristallographie - Crystalline Materials
In this paper, we report on electron microscopy studies of single crystals of the natural mineral lorándite, TlAsS2. The main focus of this investigation was to address the question as to whether those lorándite crystals are chemically and structurally homogeneous, in order to be utilized as an effective neutrino detector within the lorándite experiment (LOREX) project. Apart from few secondary minerals, being present only at the surface of the lorándite samples, scanning electron microscopy (SEM) indicated homogeneous crystals. Similarly, transmission electron microscopy (TEM) imaging revealed a homogenous and undisturbed crystal structure, with the only exception of local coffee-bean contrasts; however, rarely observed. These specific contrast variations are known to be a typical strain indicator caused by a local deformation of the crystal lattice. Energy-dispersive X-ray spectroscopy (EDS) in conjunction with electron energy-loss spectroscopy (EELS) did not show any significant chemical difference when analysing regions on or off those coffee-bean features, indicating a chemically homogenous mineral. Since the presence of lattice disturbing secondary phase precipitates could be excluded by imaging and complementary chemical analysis, crystal defects such as dislocations and stacking faults or minor fluid inclusions are discussed as the probable origin of this local elastic strain. The experimental results confirm that the studied lorándite single crystals fulfil all structural and chemical requirements to be employed as the natural mineral that allows to determine solar neutrino fluxes. In addition, critical issues regarding the rather challenging sample preparation of lorándite are reported and a quantification of the maximum tolerable electron dose in the TEM is presented, since lorándite was found to be sensitive with respect to electron beam irradiation. Furthermore, the limits of EDS measurements due to peak overlapping are shown and discussed utilizing the case of Pb in lorándite. In this regard, a comparison with the Tl- and Pb-containing natural mineral hutchinsonite, TlPbAs5S9, is also included.
27 June 2017 in Journal of the American Ceramic Society