The rapid developments in the field of digital aerial photogrammetry (DAP) in recent years have increased interest in the application of DAP data for extracting three-dimensional (3D) models of forest canopies. This technology, however, still requires further investigation to confirm its reliability in estimating forest attributes in complex forest conditions. The main purpose of this study was to evaluate the accuracy of tree height estimation based on a crown height model (CHM) generated from the difference between a DAP-derived digital surface model (DSM) and an airborne laser scanning (ALS)-derived digital terrain model (DTM). The tree heights determined based on the DAP-CHM were compared with ground-based measurements and heights obtained using ALS data only (ALS-CHM). Moreover, tree- and stand-related factors were examined to evaluate the potential influence on the obtained discrepancies between ALS- and DAP-derived heights. The obtained results indicate that the differences between the means of field-measured heights and DAP-derived heights were statistically significant. The root mean square error (RMSE) calculated in the comparison of field heights and DAP-derived heights was 1.68 m (7.34%). The results obtained for the CHM generated using only ALS data produced slightly lower errors, with RMSE = 1.25 m (5.46%) on average. Both ALS and DAP displayed the tendency to underestimate tree heights compared to those measured in the field; however, DAP produced a higher bias (1.26 m) than ALS (0.88 m). Nevertheless, DAP heights were highly correlated with the heights measured in the field (R² = 0.95) and ALS-derived heights (R² = 0.97). Tree species and height difference (the difference between the reference tree height and mean tree height in a sample plot) had the greatest influence on the differences between ALS- and DAP-derived heights. Our study confirms that a CHM computed based on the difference between a DAP-derived DSM and an ALS-derived DTM can be successfully used to measure the height of trees in the upper canopy layer.

Airborne Laser Scanning (ALS) technology can be used to identify features of terrain relief in forested areas, possibly leading to the discovery of previously unknown archaeological monuments. Spatial interpretation of numerous objects with various shapes and sizes is a difficult challenge for archaeologists. Mapping structures with multiple elements whose area can exceed dozens of hectares, such as ancient agricultural field systems, is very time-consuming. These archaeological sites are composed of a large number of embanked fields, which together form a recognizable spatial pattern. Image classification and segmentation, as well as object recognition, are the most important tasks for deep learning neural networks (DLNN) and therefore they can be used for automatic recognition of archaeological monuments. In this study, a U-Net neural network was implemented to perform semantic segmentation of the ALS-derived data including (1) archaeological, (2) natural and (3) modern features in the Polish part of the Białowieża Forest. The performance of the U-Net segmentation model was evaluated by measuring the pixel-wise similarity between ground truth and predicted segmentation masks. After 83 epochs, The Dice-Sorensen coefficient (F1 score) and the Intersect Over Union (IoU) metrics were 0.58 and 0.5, respectively. The IoU metric reached a value of 0.41, 0.62 and 0.62 for the ancient field system banks, ancient field system plots and burial mounds, respectively. The results of the U-Net deep learning model proved very useful in semantic segmentation of images derived from ALS data.

Mobile devices such as smartphones, tablets or similar devices are becoming increasingly important as measurement devices in forestry due to their advanced sensors, including RGB cameras and LiDAR systems. This review examines the current state of applications of mobile devices for measuring biometric characteristics of individual trees and presents technologies, applications, measurement accuracy and implementation barriers. Passive sensors, such as RGB cameras have proven their potential for 3D reconstruction and analysing point clouds that improve single tree-level information collection. Active sensors with LiDAR-equipped smartphones provide precise quantitative measurements but are limited by specific hardware requirements. The combination of passive and active sensing techniques has shown significant potential for comprehensive data collection. The methods of data collection, both physical and digital, significantly affect the accuracy and reproducibility of measurements. Applications such as ForestScanner and TRESTIMA^TM have automated the measurement of tree characteristics and simplified data collection. However, environmental conditions and sensor limitations pose a challenge. There are also computational obstacles, as many methods require significant post-processing. The review highlights the advances in mobile device-based forestry applications and emphasizes the need for standardized protocols and cross-device benchmarking. Future research should focus on developing robust algorithms and cost-effective solutions to improve measurement accuracy and accessibility. While mobile devices offer significant potential for forest surveying, overcoming the above-mentioned challenges is critical to optimizing their application in forest management and protection.

In recent years, forest fires have become an important issue in Central Europe. To model the probability of the occurrence of forest fires in the Lower Silesian Voivodeship of Poland, historical fire data and several types of predictors were collected or generated, including topographic, vegetation, climatic, and anthropogenic features. The main objectives of this study were to determine the importance of the predictors of forest fire occurrence and to map the probability of forest fire occurrence. The H2O driverless artificial intelligence (DAI) cloud platform was used to model forest fire probability. The gradient boosted machine (GBM) and random forest (RF) methods were applied to assess the probability of forest fire occurrence. Evaluation the importance of the variables was performed using the H2O platform permutation method. The most important variables were the presence of coniferous forest and the distance to agricultural land according to the GBM and RF methods, respectively. Model validation was conducted using receiver operating characteristic (ROC) analysis. The areas under the curve (AUCs) of the ROC plots from the GBM and RF models were 83.3% and 81.3%, respectively. Based on the results obtained, the GBM model can be recommended for the mapping of forest fire occurrence in the study area.

The Białowieża Forest (BF), a unique ecosystem of historical significance in central Europe, has a long history of assumed human settlement, with at least 200 known archaeological sites (until 2016). This study uncovers new evidence of the cultural heritage of this unique forest area using Airborne Laser Scanning (ALS) technology combined with traditional archaeological field assessment methods to verify the ALS data interpretations and to provide additional evidence about the function and origin of the newly detected archaeological sites. The results of this study include (1) a scientific approach for an improved identification of archaeological resources in forest areas; (2) new evidence about the history of the human use of the BF based on ALS data, covering the entire Polish part of the BF; and (3) an improved remote sensing infrastructure, supporting existing GIS (Geographic Information System) systems for the BF, a famous UNESCO Heritage site. Our study identified numerous locations with evidence of past human agricultural activities known in the literature as “field systems”, “lynchets” and “Celtic fields”. The initial identification included more than 300 km of possible field boundaries and plough headlands, many of which we have verified on the ground. Various past human activities creating those boundaries have existed since the (pre-) Roman Period up to the 13th century AD. The results of this study demonstrate that past human activities in the Polish part of the Białowieża Forest had been more prevalent than previously believed. As a practical result of the described activities, a geodatabase was created; this has practical applications for the system of monument protection in Poland, as well as for local communities and the BF’s management and conservation. The more widely achieved results are in line with the implementation of the concept of a cultural heritage inventory in forested and protected areas—the actions taken specify (built globally) the forms of protection and management of cultural and environmental goods.

The crown area is a critical metric for evaluating tree growth and supporting various ecological and forestry analyses. This study compares three approaches, i.e., unsupervised clustering, region-based, and deep learning, to estimate the crown area of Pinus eldarica Medw. using UAV-acquired RGB imagery (2 cm ground sampling distance) and high-density point clouds (1.27 points/cm³). The first approach applied unsupervised clustering techniques, such as Mean-shift and K-means, to directly estimate crown areas, bypassing tree top detection. The second employed a region-based approach, using Template Matching and Local Maxima (LM) for tree top identification, followed by Marker-Controlled Watershed (MCW) and Seeded Region Growing for crown delineation. The third approach utilized a Convolutional Neural Network (CNN) that integrated Digital Surface Model layers with the Visible Atmospheric Resistance Index for enhanced segmentation. The results were compared against field measurements and manual digitization. The findings reveal that CNN and MCW with LM were the most effective, particularly for small and large trees, though performance decreased for medium-sized crowns. CNN provided the most accurate results overall, with a relative root mean square error (RRMSE) of 8.85%, a Nash–Sutcliffe Efficiency (NSE) of 0.97, and a bias score (BS) of 1.00. The CNN crown area estimates showed strong correlations (R² = 0.83, 0.62, and 0.94 for small, medium, and large trees, respectively) with manually digitized references. This study underscores the value of advanced CNN techniques for precise crown area and shape estimation, highlighting the need for future research to refine algorithms for improved handling of crown size variability.