The potassium sodium niobate, K_0.5Na_0.5NbO₃, solid solution (KNN) is considered as one of the most promising, environment-friendly, lead-free candidates to replace highly efficient, lead-based piezoelectrics. Since the first reports of KNN, it has been recognized that obtaining phase-pure materials with a high density and a uniform, fine-grained microstructure is a major challenge. For this reason the present paper reviews the different methods for consolidating KNN ceramics. The difficulties involved in the solid-state synthesis of KNN powder, i.e., obtaining phase purity, the stoichiometry of the perovskite phase, and the chemical homogeneity, are discussed. The solid-state sintering of stoichiometric KNN is characterized by poor densification and an extremely narrow sintering-temperature range, which is close to the solidus temperature. A study of the initial sintering stage revealed that coarsening of the microstructure without densification contributes to a reduction of the driving force for sintering. The influences of the (K + Na)/Nb molar ratio, the presence of a liquid phase, chemical modifications (doping, complex solid solutions) and different atmospheres (i.e., defect chemistry) on the sintering are discussed. Special sintering techniques, such as pressure-assisted sintering and spark-plasma sintering, can be effective methods for enhancing the density of KNN ceramics. The sintering behavior of KNN is compared to that of a representative piezoelectric lead zirconate titanate (PZT).

Electrode materials with three-dimensional (3D) mesoporous structures possess superior features, such as a shortened solid-phase lithium diffusion distance, a large pore volume, full lithium ion accessibility, and a high specific area, which can facilitate fast lithium ion transport and electron transfer between solid/electrolyte interfaces. In this work, we introduce a facile synthesis route for the preparation of a 3D nanoarchitecture of Ge coated with carbon (3D-Ge/C) via a carbothermal reduction method in an inert atmosphere. 3D-Ge/C showed excellent cyclability: almost 86.8% capacity retention, corresponding to a charge capacity of 1216 mA h g⁻¹ even after 1000 cycles at a 2C-rate. Surprisingly, the high average reversible capacity of 1122 mA h g⁻¹ was maintained at a high charge rate of 100C (160 A g⁻¹). Even at an ultrahigh charge rate of 400C (640 A g⁻¹), an average capacity of 429 mA h g⁻¹ was attained. Further, the full cell composed of a 3D-Ge/C anode and an LiCoO₂ cathode exhibited excellent rate capability and cyclability with 94.7% capacity retention over 50 cycles. 3D-Ge/C, which offers a high energy density like batteries as well as a high power density like supercapacitors, is expected to be used in a wide range of electrochemical devices.