Electrode materials with three-dimensional (3D) mesoporous structures possess superior features, such as a shortened solid-phase lithium diffusion distance, a large pore volume, full lithium ion accessibility, and a high specific area, which can facilitate fast lithium ion transport and electron transfer between solid/electrolyte interfaces. In this work, we introduce a facile synthesis route for the preparation of a 3D nanoarchitecture of Ge coated with carbon (3D-Ge/C) via a carbothermal reduction method in an inert atmosphere. 3D-Ge/C showed excellent cyclability: almost 86.8% capacity retention, corresponding to a charge capacity of 1216 mA h g−1 even after 1000 cycles at a 2C-rate. Surprisingly, the high average reversible capacity of 1122 mA h g−1 was maintained at a high charge rate of 100C (160 A g−1). Even at an ultrahigh charge rate of 400C (640 A g−1), an average capacity of 429 mA h g−1 was attained. Further, the full cell composed of a 3D-Ge/C anode and an LiCoO2 cathode exhibited excellent rate capability and cyclability with 94.7% capacity retention over 50 cycles. 3D-Ge/C, which offers a high energy density like batteries as well as a high power density like supercapacitors, is expected to be used in a wide range of electrochemical devices.
Copper oxide (CuO) thin films are successfully synthesized using a surfactant assisted chemical bath deposition method for application in supercapacitors. The effect of organic surfactants such as Triton X-100 and polyvinyl alcohol (PVA) on structural, morphological, surface areas and electrochemical properties of CuO thin films is investigated. The films deposited using organic surfactants exhibit different surface morphologies. It is observed that the organic surfactants play important roles in modifying the morphology, surface area and pore size distribution. Electrochemical analysis confirms that the nanostructures of the electrode material play a vital role in supercapacitors. The cyclic voltammetry studies show a considerably improved high rate pseudocapacitance of CuO samples synthesized using organic surfactants. The maximum specific capacitance of 411 F g−1 at 5 mV s−1 is obtained for the CuO sample prepared using an organic surfactant (Triton X-100). Furthermore, all the CuO nanostructures exhibit high power performance, excellent rate as well as long term cycling stability. The Ragone plot ascertains better power and energy densities of CuO nanostructured samples. This is an easy and simple way to tune the morphology using surfactants which can be applied for other energy storage materials.
8 August 2016 in ACS Applied Materials & Interfaces
Highly monodispersed N-TiO2 nanoparticles were successfully decorated on graphene by facile in situ wet chemical method and showed utmost hydrogen production.
9 July 2012 in Physical Chemistry Chemical Physics
Polyaniline (PANI) and silver doped polyaniline (Ag/PANI) thin films were deposited on stainless steel substrates by a dip coating technique. To study the effect of doping concentration of Ag on the specific capacitance of PANI the concentration of Ag was varied from 0.3 to 1.2 weight percent. Fourier transform-infrared and Fourier transform-Raman spectroscopy, and energy dispersion X-ray techniques were used for the phase identification and determination of the doping content in the PANI films, respectively. The surface morphology of the films was examined by Field Emission Scanning Electron Microscopy, which revealed a nanofiber like structure for PANI and nanofibers with bright spots of Ag particles for the Ag/PANI films. There was decrease in the room temperature electrical resistivity of the Ag/PANI films of the order of 102 with increasing Ag concentration. The supercapacitive behavior of the electrodes was tested in a three electrode system using 1.0 M H2SO4 electrolyte. The specific capacitance increased from 285 F g−1 (for PANI) to 512 F g−1 for Ag/PANI at 0.9 weight percent doping of Ag, owing to the synergic effect of PANI and silver nanoparticles. This work demonstrates a simple strategy of improving the specific capacitance of polymer electrodes and may also be easily adopted for other dopants.
To fulfill the high power and high energy density demands for Li-ion batteries (LIBs) new anode materials need to be explored to replace conventional graphite. Herein, we report the urea assisted facile co-precipitation synthesis of spinel NiCo2O4 and its application as an anode material for LIBs. The synthesized NiCo2O4 exhibited an urchin-like microstructure and polycrystalline and mesoporous nature. In addition, the mesoporous NiCo2O4 electrode exhibited an initial discharge capacity of 1095 mA h g−1 and maintained a reversible capacity of 1000 mA h g−1 for 400 cycles at 0.5 C-rate. The reversible capacity of NiCo2O4 could still be maintained at 718 mA h g−1, even at 10 C. The mesoporous NiCo2O4 exhibits great potential as an anode material for LIBs with the advantages of unique performance and facile preparation.