Composite deck systems composed of a steel deck and a reactive powder–concrete (RPC) layer are widely used in long-span bridges because of their satisfactory crack resistance and fatigue resilience. However, durability problems usually appear at the interface between the wet joint and the precast RPC layer. In the present study, a dovetail-shaped RPC wet joint is proposed to improve crack resistance. An experimental study was conducted to describe the mechanical behavior of the dovetail-shaped RPC wet joint under a negative moment, including crack development, strain distribution, and load–deflection response. A finite-element model validated with the experimental results was built in a finite-element program for supplementary parametric analysis. The reinforcement ratio and the inclined angle of the dovetail-shaped area were quantitatively investigated. Design parameters are recommended according to the parametric analysis.
1 September 2018 in Journal of Structural Engineering
Perfobond rib shear connectors (PBL shear connectors) are widely used in composite structures for their excellent mechanical performance. However, the mechanism responsible for the mechanical behavior of multihole PBL shear connectors has seldom been investigated. This study focuses on the load sharing and slip distribution in multiple holes of a PBL shear connector. The load–slip relationships and strain distributions of 14 different multihole PBL shear connector specimens are experimentally determined. The results reveal that the design parameters, i.e., the spacing and diameters of perforated rebar and the concrete strength, affect the load sharing and slip distribution. Based on the physical tests, an analytical model is proposed to describe the mechanical behavior of multihole PBL shear connectors, with the assumption of a Lorentzian distributed strain on the perforated steel plate and surrounding concrete. Further mathematical derivation is performed to determine the load sharing and slip distribution in multiple holes of a PBL shear connector. The accuracy of the theoretical solution is considered satisfactory compared with the physical tests.
8 January 2021 in Journal of Earthquake Engineering
This paper summarizes a sophisticated field investigation of the seismic damage to a continuous rigid frame bridge. Cracking and deformation of main girder, failure of bearings, and damage of piers were examined. The whiplash effect of the long side span of main bridge caused the prominent damage of bearings and restrainers on the transition piers. A numerical model was developed for supplementary analysis. The multi-directional dynamic analyses were conducted, which revealed a satisfactory agreement with the field investigation. Based on the numerical model, the effect of anti-tensile configurations was analyzed for reducing the whiplash effect of the side span.
This paper proposes a novel reinforced ultra-high-performance concrete (UHPC)-normal strength concrete (NSC) composite column. The main feature of the reinforced UHPC-NSC composite column is the use of an exterior UHPC cover, which is helpful for improving the load-carrying capacity, deformability, and crack resistance. This study focused on the axial behavior of the reinforced UHPC-NSC composite column. A total of 12 specimens were designed to investigate the axial behavior of the composite column under compression. The thickness of the exterior UHPC cover, volumetric stirrup ratio, and construction method were considered as the main experimental parameters. The failure modes and strain–stress relationships are discussed in this paper. By introducing the exterior UHPC cover, the peak confined strength obviously improved. The compressive strain at the peak confined strength was mainly determined by the deformability of the plain UHPC material. The composite column resulted in a unique sudden drop immediately after the peak confined strength, owing to the rapid loss of the confining stress from the exterior UHPC cover. A trilinear model is proposed to describe the strain–stress relationship of the composite column. The results obtained by the modified model are in good agreement with the test results.