1 September 2018 in Journal of Structural Engineering
Perfobond rib shear connectors (PBL shear connectors) are widely used in composite structures for their excellent mechanical performance. However, the mechanism responsible for the mechanical behavior of multihole PBL shear connectors has seldom been investigated. This study focuses on the load sharing and slip distribution in multiple holes of a PBL shear connector. The load–slip relationships and strain distributions of 14 different multihole PBL shear connector specimens are experimentally determined. The results reveal that the design parameters, i.e., the spacing and diameters of perforated rebar and the concrete strength, affect the load sharing and slip distribution. Based on the physical tests, an analytical model is proposed to describe the mechanical behavior of multihole PBL shear connectors, with the assumption of a Lorentzian distributed strain on the perforated steel plate and surrounding concrete. Further mathematical derivation is performed to determine the load sharing and slip distribution in multiple holes of a PBL shear connector. The accuracy of the theoretical solution is considered satisfactory compared with the physical tests.
8 January 2021 in Journal of Earthquake Engineering
This paper summarizes a sophisticated field investigation of the seismic damage to a continuous rigid frame bridge. Cracking and deformation of main girder, failure of bearings, and damage of piers were examined. The whiplash effect of the long side span of main bridge caused the prominent damage of bearings and restrainers on the transition piers. A numerical model was developed for supplementary analysis. The multi-directional dynamic analyses were conducted, which revealed a satisfactory agreement with the field investigation. Based on the numerical model, the effect of anti-tensile configurations was analyzed for reducing the whiplash effect of the side span.
6 July 2023 in International Journal of Non-Linear Mechanics
7 February 2022 in Structural Engineering International
Nanjing Jiangxinzhou Yangtze River Bridge is located at Nanjing, People’s Republic of China. The main bridge spans Yangtze River in the form of a cable-stayed bridge with three towers and two main spans, with a total length of 1796 m and a main span of 600 m. The towers and main beams of the bridge are all steel–concrete composite structures, which is the first all-steel–concrete composite structure cable-stayed bridge in the world. The bridge innovatively develops a steel shell–concrete composite structure tower, deploys coarse aggregate reactive powder concrete (CA-RPC), and applies it to the main girder of the bridge to form a lightweight and high-performance steel–concrete composite beam. Numerous innovative technologies have been achieved with new materials, new structures, new processes, and many other aspects. The unique structural concept has significantly increased the factory manufacturing speed of bridge components, which not only reduces the work and labour cost at the bridge site above the bearing platform to less than 25% but also effectively reduces the amount and loss of engineering materials during bridge construction, all of which have made outstanding contributions to the development of cable-stayed bridges. At the same time, it has also contributed a bridge of stunning appearance and unique structure to China and world bridge engineering.
27 November 2021 in Journal of Earthquake Engineering
Concrete-filled steel tube (CFST) stiff skeleton concrete arch bridges can be designed with longer spans using balanced ring-casting construction. However, this construction method induces non-planar sectional stress in the arch rings. To investigate the influence of the non-planar sectional stress on the seismic performance of arch bridges, we developed two numerical models of a typical arch bridge. The first model simulates the construction process of balanced ring-casting, while the second model ignores the construction process. The dynamic analysis results reveal that, if the construction process is ignored, the seismic risks of concrete cracking and reinforcement yielding in the arch rings will be underestimated.
15 November 2019 in Frontiers in Built Environment
Ultra-high-performance Concrete (UHPC) has a wide range of potential civil engineering applications, owing to its excellent mechanical properties and durability. To investigate the bending behavior of reinforced UHPC components, nine reinforced UHPC deck specimens were tested by conducting four-point bending experiments. The crack development, load-carrying capacity, and strain distribution were observed, and the tests results revealed that the introduction of steel fibers into UHPC obviously improved the structure's toughness and crack resistance. Based on the tests results, a theoretical formula was derived for calculating the bending stiffness of the UHPC decks during the entire loading process, which was divided into three representative stages based on the initial cracking and yielding. The results for the load-deflection response obtained by the formulas are in good agreement with the experimental results.