A unique redox active flexible solid-state asymmetric supercapacitor with ultra-high capacitance and energy density was fabricated using a composite comprising MgCo2O4 nanoneedles and micro and mesoporous silicon carbide flakes (SiCF) (SiCF/MgCo2O4) as the positive electrode material. Due to the synergistic effect of the two materials, this hybrid electrode has a high specific capacitance of 516.7 F g−1 at a scan rate of 5 mV s−1 in a 1 M KOH aqueous electrolyte. To obtain a reasonable matching of positive and negative electrode pairs, a composite of Fe3O4 nanoparticles and SiCF (SiCF/Fe3O4) was synthesized for use as a negative electrode material, which shows a high capacitance of 423.2 F g−1 at a scan rate of 5 mV s−1. Therefore, by pairing the SiCF/MgCo2O4 positive electrode and the SiCF/Fe3O4 negative electrode with a redox active quasi-solid-state PVA-KOH-p-nitroaniline (PVA-KOH-PNA) gel electrolyte, a novel solid-state asymmetric supercapacitor device was assembled. Because of the synergistic effect between the highly porous SiCF and the vigorous redox-reaction of metal oxides, the hybrid nanostructure electrodes exhibited outstanding charge storage and transport. In addition, the redox active PVA-KOH-PNA electrolyte adds additional pseudocapacitance, which arises from the nitro-reduction and oxidation and reduction process of the reduction product of p-phenylenediamine, resulting in an enhancement of the capacitance (a specific capacitance of 161.77 F g−1 at a scan rate of 5 mV s−1) and energy density (maximum energy density of 72.79 Wh kg−1 at a power density of 727.96 W kg−1).
Snake robots are composed of multiple links and joints and have a high degree of freedom. They can perform various motions and can overcome various terrains. Snake robots need additional driving algorithms and sensors that acquire terrain data in order to overcome rough terrains such as grasslands and slopes. In this study, we propose a driving assistant mechanism (DAM), which assists locomotion without additional driving algorithms and sensors. In this paper, we confirmed that the DAM prevents a roll down on a slope and increases the locomotion speed through dynamic simulation and experiments. It was possible to overcome grasslands and a 27 degrees slope without using additional driving controllers. In conclusion, we expect that a snake robot can conduct a wide range of missions well, such as exploring disaster sites and rough terrain, by using the proposed mechanism.
23 May 2024 in IEEE/ASME Transactions on Mechatronics
In this article, we propose a novel balance control method called air reaction wheel (ARW) for a small-scale legged jumping robot, which can generate high torque while being compact and lightweight. The ARW generates torque in the same direction through the combination of the torque induced by pushing the air, and the moment of inertia of ARW with the angular acceleration of the motor, resulting in high torque performance while being lighter and more compact than conventional balance control mechanisms. To validate the torque performance of the ARW, we conduct dynamic analysis and computational fluid dynamics simulations of the ARW and utilize a central composite face model to find the optimal shape for generating high torque. Furthermore, we verify that the proposed method generates high torque while being compact and lightweight compared to the conventional methods through theoretical analysis and comparative experiments on the ARW and existing mechanisms regarding torque performance. Finally, we conducted jump and landing experiments by attaching the optimized ARW model to a jumping robot, and through experimental results, we verified that the proposed mechanism contributes to stable jumping and landing.
Hot embossing is in the spotlight due to the development of electronic devices, wearable devices, microfluidic channels, and optical devices. The conventional hot-embossing process creates a pattern on polymer film by using a previously patterned stamp that applied heat and pressure. This method has a disadvantage because it depends on the shape of the patterned stamp. For this reason, this method requires a high cost and a lot of time when replacing the stamp for making a new pattern shape or for modifying the error of the pattern. To solve this problem, the impact print-type hot-embossing method was proposed to create arbitrary patterns, and equipment for this method was assembled. In addition, patterning experiments were conducted to imprint several tens of micrometer-sized patterns in real time. For this method, we proposed an electromagnetic actuator for making the hot-embossing print type and for reducing the size of the actuator compared to previous studies. Through the patterning experiment, we determined that the proposed device could engrave fine dot patterns ranging from 60 μm to 120 μm in diameter. We verified the size of the generated pattern by using a confocal microscope, and we found the proposed hot-embossing technology can realize the desired shape in any position by using the proposed technique.