This letter proposes and verifies a new method, the ring-pull mechanism, to overcome the disadvantages of existing wearable robotic gloves. By attaching a ring to the metacarpopha-langeal joint of the finger, the ring-pull mechanism supplements the grasping force of the user, while reducing the weight of the entire wearable robotic glove system. Ring-pull mechanism experiments were conducted to determine which finger combinations had the most positive effect on muscle strength assistance, and through this, the Ring-Pull type Soft Glove (RPSG) was developed. The main body of the developed RPSG is composed of single polymer silicon, a soft material, and is driven by tendon-driven actuation. The tendon path is secured through a tube attached to the palm that matches the direction of the flexor digitorum superficialis (FDS). The new type of wearable robotic glove was manufactured with the proposed mechanism, and excellent fit and strength support effects were confirmed. The RPSG increased the subject's grasping force by 25.69% on average, and the %MVIC data analysis demonstrated that the activation of FDS decreased by about 23.51%. As a result, it was confirmed that the user's muscle efficiency was increased due to the muscle support and muscle function improvement provided by the RPSG.
13 March 2024 in IEEE Robotics and Automation Letters
Soft pneumatic actuators (SPAs) that can perform three-dimensional movements are being developed to perform more diverse tasks beyond simple bending. The conventional PneuNet actuators have expansion limit layers, which can obtain more tip force by limiting the expansion of the bottom. However, the presence of the expansion limit layer impedes other motions, such as rotation, when configured with multiple channels. In this study, we propose a two-chamber PneuNet actuator (TPA) to which the expansion limit line (ELLINE) is applied to obtain a force gain without a limitation on rotational motion due to the expansion limit layer. We perform a finite element analysis (FEA) on three designs that can rotate and bend using twochamber to find the optimal design. The effects on twisting, bending, and tip force according to the width of the ELLINE on the selected design were then verified through an FEA. After measuring rotation and bending for the fabricated actuator with and without the ELLINE. In the case of the fabricated TPA with the ELLINE, the bending decreased by 19.8%. However, rotation increased by 22.8%, tip force increased by 1.53 times (with the ELLINE the force is 2.77 N in 70 kPa; without the ELLINE it is 1.8 N in 70 kPa), and grasping force increased by 5 times (with the ELLINE the force is 500 gf in 70 kPa, without the ELLINE it is 100 gf in 70 kPa). Furthermore, we fabricated a gripper using three actuators, capable of holding a weight of 505 g and objects of various shapes.
This study introduces a flexure‐based supernumerary robotic finger (FBSF) inspired by the proportions of the human thumb, aiming to overcome existing limitations in robotic finger design. In pursuit of seamless cooperation with the user's hand, human finger proportions are replicated. Finite element analysis of all five fingers indicates that the thumb‐mimicking configuration offers the largest workspace and bending angle. The FBSF, featuring a polycarbonate paired crossed flexural hinge structure and high impact polystyrene links, closely mirrors the human thumb. Weighing 59 g (main body) and 170 g (control box), the FBSF enables user‐driven control and decoupled actuation based on user intent, utilizing the electromyographic signal of the extensor carpi ulnaris via isometric contractions. An experimental protocol, including task blocks (releasing, clenching), confirms the FBSF's responsiveness to user intentions. When utilizing FBSF, it has been verified using a motion capture camera system that it is possible to extend the existing hand workspace by approximately 29.72%. Performance tests demonstrate the FBSF's capability to grasp various objects and assist in tasks, with a maximum load‐bearing capacity of 2.6 kg experimentally verified. This study demonstrates the potential of the developed FBSF to augment hand functionality in diverse applications.
1 September 2026 in IEEE Robotics and Automation Letters