Intensive and large-scale underground coal mining has caused geological disasters such as local ground subsidence, cracks and collapse in the Datong coalfield, China, inducing serious threats to local residents. Interferometric synthetic aperture radar (InSAR) has the capability of surface deformation detection with high precision in vast mountainous areas. DInSAR, stacking-InSAR and SBAS-InSAR are commonly used InSAR-related deformation analysis methods. They can provide effective support for mine ecological security monitoring and prevent disasters. We use the three methods to conduct the deformation observation experiments in the Datong coalfield. Sentinel-1A data from November 2020 to October 2021 are used. As a result, a total of 256 deformations in the Datong coalfield were successfully detected by the three methods, of which 218 are mining deformations, accounting for 85% of the total deformations. By comparing the results of the three methods, we found that DInSAR, stacking-InSAR, and SBAS-InSAR detected 130, 256, and 226 deformations in the Datong coalfield, respectively, while the deformations caused by coal mining were 128, 218, and 190. DInSAR results with long spatiotemporal baselines are seriously incoherent. SBAS-InSAR results of displacement rate are more precise than stacking-InSAR, and the mean standard deviation is 1.0 mm/a. However, for areas with lush vegetation or low coherence, SBAS-InSAR has poor performance. The detection deformation area results of DInSAR and SBAS-InSAR are subsets of stacking-InSAR. The displacement rates obtained by stacking-InSAR and SBAS-InSAR are consistent; the mean difference in the displacement rate between the two methods is 2.7 mm/a, and the standard deviation is 5.1 mm/a. The mining deformation locations and their shapes in the study area can be identified with high efficiency and power by stacking-InSAR. Therefore, with a comprehensive understanding of the advantages and limitations of the three methods, stacking-InSAR can be an effective and fast method to identify the level, location and range of mining deformation in lush mountainous areas.

Remote sensing data plays an important role in classifying land use/land cover (LULC) information from various sensors having different spectral, spatial and temporal resolutions. The fusion of an optical image and a synthetic aperture radar (SAR) image is significant for the study of LULC change and simulation in cloudy mountain areas. This paper proposes a novel feature-level fusion framework, in which the Landsat operational land imager (OLI) images with different cloud covers, and a fully polarized Advanced Land Observing Satellite-2 (ALOS-2) image are selected to conduct LULC classification experiments. We take the karst mountain in Chongqing as a study area, following which the features of the spectrum, texture, and space of the optical and SAR images are extracted, respectively, supplemented by the normalized difference vegetation index (NDVI), elevation, slope and other relevant information. Furthermore, the fused feature image is subjected to object-oriented multi-scale segmentation, subsequently, an improved support vector machine (SVM) model is used to conduct the experiment. The results showed that the proposed framework has the advantages of multi-source data feature fusion, high classification performance and can be applied in mountain areas. The overall accuracy (OA) was more than 85%, with the Kappa coefficient values of 0.845. In terms of forest, gardenland, water, and artificial surfaces, the precision of fusion image was higher compared to single data source. In addition, ALOS-2 data have a comparative advantage in the extraction of shrubland, water, and artificial surfaces. This work aims to provide a reference for selecting the suitable data and methods for LULC classification in cloudy mountain areas. When in cloudy mountain areas, the fusion features of images should be preferred, during the period of low cloudiness, the Landsat OLI data should be selected, when no optical remote sensing data are available, and the fully polarized ALOS-2 data are an appropriate substitute.

Attitude jitter is a common phenomenon in the application of high resolution satellites, which may result in large errors of geo-positioning and mapping accuracy. Therefore, it is critical to detect and compensate attitude jitter to explore the full geometric potential of high resolution satellites. In this paper, a framework of jitter detection and compensation for high resolution satellites is proposed and some preliminary investigation is performed. Three methods for jitter detection are presented as follows. (1) The first one is based on multispectral images using parallax between two different bands in the image; (2) The second is based on stereo images using rational polynomial coefficients (RPCs); (3) The third is based on panchromatic images employing orthorectification processing. Based on the calculated parallax maps, the frequency and amplitude of the detected jitter are obtained. Subsequently, two approaches for jitter compensation are conducted. (1) The first one is to conduct the compensation on image, which uses the derived parallax observations for resampling; (2) The second is to conduct the compensation on attitude data, which treats the influence of jitter on attitude as correction of charge-coupled device (CCD) viewing angles. Experiments with images from several satellites, such as ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiaometer), LRO (Lunar Reconnaissance Orbiter) and ZY-3 (ZiYuan-3) demonstrate the promising performance and feasibility of the proposed framework.

The availability of ZY-3 satellite data provides additional potential for surveying, mapping, and quantitative studies. Topographic correction, which eliminates the terrain effect caused by the topographic relief, is one of the fundamental steps in data preprocessing for quantitative analysis of vegetation. In this paper, we rectified ZY-3 satellite data using five commonly used topographic correction models and investigate their impact on the regression estimation of shrub forest leaf biomass obtained from sample plots in the study area. All the corrections were assessed by means of: (1) visual inspection (2) reduction of the standard deviation (SD) at different terrain slopes (3) correlation analysis of different correction results. Best results were obtained from the Minnaert+SCS correction, based on the non-Lambertian reflection assumption. Additional analysis showed that the coefficient correlation of the biomass fitting result was improved after the Minnaert+SCS correction, as well as the fitting precision. The R² has increased by 0.113 to reach 0.869, while the SD (standard deviation) of the biomass dropped by 21.2%. Therefore, based on the facts, we conclude that in the region with large topographic relief, the topographical correction is essential to the estimation of the biomass.

Trajectory big data have significant applications in many areas, such as traffic management, urban planning and military reconnaissance. Traditional visualization methods, which are represented by contour maps, shading maps and hypsometric maps, are mainly based on the spatiotemporal information of trajectories, which can macroscopically study the spatiotemporal conditions of the entire trajectory set and microscopically analyze the individual movement of each trajectory; such methods are widely used in screen display and flat mapping. With the improvement of trajectory data quality, these data can generally describe information in the spatial and temporal dimensions and involve many other attributes (e.g., speed, orientation, and elevation) with large data amounts and high dimensions. Additionally, these data have relatively complicated internal relationships and regularities, whose analysis could cause many troubles; the traditional approaches can no longer fully meet the requirements of visualizing trajectory data and mining hidden information. Therefore, diverse visualization methods that present the value of massive trajectory information are currently a hot research topic. This paper summarizes the research status of trajectory data-visualization techniques in recent years and extracts common contemporary trajectory data-visualization methods to comprehensively cognize and understand the fundamental characteristics and diverse achievements of trajectory-data visualization.