In the current paper, a novel technique is represented to control the liquid petrochemical and petroleum products passing through a transmitting pipe. A simulation setup, including an X-ray tube, a detector, and a pipe, was conducted by Monte Carlo N Particle-X version (MCNPX) code to examine a two-by-two mixture of four diverse petroleum products (ethylene glycol, crude oil, gasoline, and gasoil) in various volumetric ratios. As the feature extraction system, twelve time characteristics were extracted from the received signal, and the most effective ones were selected using correlation analysis to present reasonable inputs for neural network training. Three Multilayers perceptron (MLP) neural networks were applied to indicate the volume ratio of three kinds of petroleum products, and the volume ratio of the fourth product can be feasibly achieved through the results of the three aforementioned networks. In this study, increasing accuracy was placed on the agenda, and an RMSE < 1.21 indicates this high accuracy. Increasing the accuracy of predicting volume ratio, which is due to the use of appropriate characteristics as the neural network input, is the most important innovation in this study, which is why the proposed system can be used as an efficient method in the oil industry.

Nanoelectromechanical (NEM) switches inherently have zero off-state leakage current and nearly ideal sub-threshold swing due to their mechanical nature of operation, in contrast to semiconductor switches. A challenge for NEM switches to be practical for low-power digital logic application is their relatively large operation voltage which can result in higher dynamic power consumption. Herein we report a three-terminal laterally actuated NEM switch fabricated with an amorphous metallic material: tungsten nitride (WN _x ). As-deposited WN _x thin films have high Young's modulus (300 GPa) and reasonably high hardness (3 GPa), which are advantageous for high wear resistance. The first prototype WN _x switches are demonstrated to operate with relatively low control voltage, down to 0.8 V for an air gap thickness of 150 nm.

When fluids flow into the pipes, the materials in them cause deposits to form inside the pipes over time, which is a threat to the efficiency of the equipment and their depreciation. In the present study, a method for detecting the volume percentage of two-phase flow by considering the presence of scale inside the test pipe is presented using artificial intelligence networks. The method is non-invasive and works in such a way that the detector located on one side of the pipe absorbs the photons that have passed through the other side of the pipe. These photons are emitted to the pipe by a dual source of the isotopes barium-133 and cesium-137. The Monte Carlo N Particle Code (MCNP) simulates the structure, and wavelet features are extracted from the data recorded by the detector. These features are considered Group methods of data handling (GMDH) inputs. A neural network is trained to determine the volume percentage with high accuracy independent of the thickness of the scale in the pipe. In this research, to implement a precise system for working in operating conditions, different conditions, including different flow regimes and different scale thickness values as well as different volume percentages, are simulated. The proposed system is able to determine the volume percentages with high accuracy, regardless of the type of flow regime and the amount of scale inside the pipe. The use of feature extraction techniques in the implementation of the proposed detection system not only reduces the number of detectors, reduces costs, and simplifies the system but also increases the accuracy to a good extent.

Scale formation inside oil and gas pipelines is always one of the main threats to the efficiency of equipment and their depreciation. In this study, an artificial intelligence method method is presented to provide the flow regime and volume percentage of a two-phase flow while considering the presence of scale inside the test pipe. In this non-invasive method, a dual-energy source of barium-133 and cesium-137 isotopes is irradiated, and the photons are absorbed by a detector as they pass through the test pipe on the other side of the pipe. The Monte Carlo N Particle Code (MCNP) simulates the structure and frequency features, such as the amplitudes of the first, second, third, and fourth dominant frequencies, which are extracted from the data recorded by the detector. These features use radial basis function neural network (RBFNN) inputs, where two neural networks are also trained to accurately determine the volume percentage and correctly classify all flow patterns, independent of scale thickness in the pipe. The advantage of the proposed system in this study compared to the conventional systems is that it has a better measuring precision as well as a simpler structure (using one detector instead of two).

We report observation of energy reversible switching from amorphous metal based nanoelectromechanical (NEM) switch. For ultra-low power electronics, NEM switches can be used as a complementary switching element in many nanoelectronic system applications. Its inherent zero power consumption because of mechanical detachment is an attractive feature. However, its operating voltage needs to be in the realm of 1 volt or lower. Appropriate design and lower Young's modulus can contribute achieving lower operating voltage. Therefore, we have developed amorphous metal with low Young's modulus and in this paper reporting the energy reversible switching from a laterally actuated double electrode NEM switch.

In this paper, gamma attenuation has been utilised as a veritable tool for non-invasive estimation of the thickness of scale deposits. By simulating flow regimes at six volume percentages and seven scale thicknesses of a two phase-flow in a pipe, our study utilised a dual-energy gamma source with Ba-133 and Cs-137 radioisotopes, a steel pipe, and a 2.54 cm × 2.54 cm sodium iodide (NaI) photon detector to analyse three different flow regimes. We employed Fourier transform and frequency characteristics (specifically, the amplitudes of the first to fourth dominant frequencies) to transform the received signals to the frequency domain, and subsequently to extract the various features of the signal. These features were then used as inputs for the group method for data Hiding (GMDH) neural network framework used to predict the scale thickness inside the pipe. Due to the use of appropriate features, our proposed technique recorded an average root mean square error (RMSE) of 0.22, which is a very good error compared to the detection systems presented in previous studies. Moreover, this performance is indicative of the utility of our GMDH neural network extraction process and its potential applications in determining parameters such as type of flow regime, volume percentage, etc. in multiphase flows and across other areas of the oil and gas industry.