Under the typical hot isostatic pressing (HIP) processing conditions, plastic deformation by dislocation slip is considered the primary mechanism for pore shrinkage, according to experimental observations and deformation mechanism maps. In the present work, a crystal plasticity model has been used to investigate the influence of applied pressure and holding time on porosity reduction in a nickel-base single crystal superalloy. The influence of trapped gas on pore shrinkage is modeled by coupling mechanical deformation with pore–gas interaction. In qualitative agreement with experimental investigations, we observe that increasing the applied pressure or the holding time can effectively reduce porosity. Furthermore, the effect of pore shape on the shrinkage is observed to depend on a combination of elastic anisotropy and the complex distribution of stresses around the pore. Simulation results also reveal that, for pores of the same shape, smaller pores (radius < 0.1 μm) have a higher shrinkage rate in comparison to larger pores (radius ≥ 0.1 μm), which is attributed to the increasing pore surface energies with decreasing pore sizes. It is also found that, for smaller initial gas-filled pores (radius < 0.1 μm), HIP can result in very high gas pressures (on the order of GPa). Such high pressures either act as a driving force for argon to diffuse into the surrounding metal during HIP itself, or it can result in pore re-opening during subsequent annealing or mechanical loading. These results demonstrate that the micromechanical model can quantitatively evaluate the individual influences of HIP processing conditions and pore characteristics on pore annihilation, which can help optimize the HIP process parameters in the future.
8 November 2019 in Journal of Open Source Software
To study process-structure-property relationships it is essential to understand the contribution of microstructure to material behavior. Micromechanical modeling allows us to understand the influence of microstructural features on the macroscopic mechanical behavior through numerical simulations. At the center of this approach lies the modeling of synthetic microstructures that mimick the important aspects such as grain morphologies and crystallographic orientations.
In recent times, additive manufacturing (AM) has proven to be an indispensable technique for processing complex 3D parts because of the versatility and ease of fabrication it offers. However, the generated microstructures show a high degree of complexity due to the complex solidification process of the melt pool. In this study, micromechanical modeling is applied to gain deeper insight into the influence of defects on plasticity and damage of 316L stainless steel specimens produced by a laser powder bed fusion (L‐PBF) process. With the statistical data obtained from microstructure characterization, the complex AM microstructures are modeled by a synthetic microstructure generation tool. A damage model in combination with an element deletion technique is implemented into a nonlocal crystal plasticity model to describe anisotropic mechanical behavior, including damage evolution. The element deletion technique is applied to effectively model the growth and coalescence of microstructural pores as described by a damage parameter. Numerical simulations show that the shape of the pores not only affects the yielding and hardening behavior but also influences the porosity evolution itself.
Employing atomistic simulations, we investigated the void collapse mechanisms in single crystal Ni during hydrostatic compression and explored how the atomistic mechanisms of void collapse are influenced by temperature. Our results suggest that the emission and associated mutual interactions of dislocation loops around the void is the primary mechanism of void collapse, irrespective of the temperature. The rate of void collapse is almost insensitive to the temperature, and the process is not thermally activated until a high temperature (∼1200–1500 K) is reached. Our simulations reveal that, at elevated temperatures, dislocation motion is assisted by vacancy diffusion and consequently the void is observed to collapse continuously without showing appreciable strain hardening around it. In contrast, at low and ambient temperatures (1 and 300 K), void collapse is delayed after an initial stage of closure due to significant strain hardening around the void. Furthermore, we observe that the dislocation network produced during void collapse remains the sample even after complete void collapse, as was observed in a recent experiment of nickel-base superalloy after hot isostatic pressing.